Archive for necromunda

The State of the Hunt, Week 7/2017

Posted in 40k, Blood Bowl, Chaos, Conversions, Fluff, Inq28, Inquisitor, state of the hunt, WIP with tags , , , , , , , , , , , , , , , , , , on February 14, 2017 by krautscientist

As it turns out, last week’s decision to force myself to actually sit down and paint something was really for the best: Not only did it result in a model I am really, really happy with — I’ve also managed to keep the creative spark alive until now. So even though I am currently suffering from a rather nasty case of the flu, I have still finished some more hobby related stuff. So let’s take about some of the recent developments today:


I. A Chaotic Tome

One of the more frustrating parts of the 2016 Christmas season was my attempt to get hold of a) the Traitor Legions Codex Supplement, b) Canoness Veridyan and c) the Index Chaotica book. The Canoness, in particular, sold out about three or four times, and once the model was finally back in stock, the Index Chaotica was gone for good — or at least that’s what it looked like then.

Enter fellow hobbyist Augustus b’Raass (whose fantastic work you might want to check out here, by the way): Auggs was nice enough to swing by the Amsterdam GW store, pick up a spare copy of the book and send it my way — that was really awesome and yet another proof that this hobby of ours is full of wonderfully generous and thoughtful people!

As for the book itself, while I am writing this, it seems to be back in stock, so is it worth it? I’d say so, yes. The cynic in me wants to poke fun at the fact that it’s basically a – ever so slightly haphazard – collection of pre-published content, but then the stuff from Realm of Chaos, for instance, is only really available in the original books, and you’ll be paying through the nose if you want to obtain one of those. Plus the vintage chaos content is simply that good: sinister, evil, spiky and occasionally darkly humorous. And some of the classic artwork is still spectacular.

For instance, I was elated to find within the book a wonderfully vibrant reproduction of Geoff Taylor’s iconic World Eaters illustration. In spite of being decidedly old skool, it has also managed to age incredibly well, if you ask me:

There’s also this WFB-chaos centric piece from the same artist that actually almost seems like a companion piece of the World Eaters picture:

I still remember when this image appeared on the box of the Chaotic paints set (Tentacle Pink FTW!), and I was spellbound and tried to figure out what I was actually seeing — the lumbering war machine in the back was especially fascinating, as it subtly hinted at a WFB/40k connection. From a modern standpoint, I’d say it’s actually a depiction of a Lord of War, a Khornate daemon engine from Epic 40k that eventually grew into the modern Lord of Skulls. It also serves as living proof of how much more awesome GW artwork was when it didn’t limit itself to picturing available models — but that’s a subject for another time.

Speaking of Khorne, the Khornate content alone is basically worth the price of admission and should provide me with lots and lots of new ideas. And while the internet will provide you with lots and lots of fuzzy scans of vintage GW artwork, there are still some surprises to be had here, among them an elusive Jes Goodwin sketch for a dedicated heavy support World Eater:

Actually, Jes Goodwin’s design sketches are yet another reason to pick up the book: I cannot help marveling at the quality of his concepts for the four cult legions and the original 2nd edition CSM special characters –incredible stuff!
Oh, and let me just state for the record that the book obviously wouldn’t have been complete without the wonderful berzerker on the right courtesy of Mark Gibbons! 🙂

So anyway, I’ve spent some very enjoyable weeks going back and forth through the book and immersing myself in the rich background for the chaos powers. I am ever so thankful to Augustus b’Raass for getting me a copy, and I suppose I’ll have to come up with something special in order to make it up to him — cheers, buddy! 🙂


II. A Merry Band of Misfits

I didn’t merely spend my time browsing through iconic chaos content from the yesteryear, though: Some of you might remember this little project here from last year: The Road Crew:

Now this little warband project was basically started as a fun diversion (and as a way to channel some of the influences from the Mad Max universe), but before I realised it, it had already started to take on a life of its own, coagulating into a little retinue.

The basic idea here was to start with some of the pit slave tropes introduced by Necromunda, but move beyond those character archetypes to include mutants, gunmen or even former Imperial adepts and shape them into a gang of malcontents that have disappeared between the cracks of the 41st millennium.

Now if you take a look at the image above, you’ll realise that there are already quite a few beefy warrior types — but this outfit still needed some brains. That’s why I built this guy last year:

Doc WIP (5)
Where the more gladiatorial types are muscular and crudely augmented, I wanted a gaunt and more delicate look for the brainy guy, and a combination of AdMech parts led to an outcome that was pretty close to my vision. The interesting task was to make a model that is so different from a structural standpoint look like it still belonged with the group. I tried to achieve that via a suitably strong paintjob, and here’s the result of that little endeavour:

This is Solon Antonov, nicknamed “The Doktor”, formerly a low to mid-tier member of the Adeptus Mechanicus who stationed on St. Sabasto’s Reach to select suitable slaves to undergo augmetic modification and be transported off-world, to spend the rest of their sad lives toiling away in one of the mines or forges of the Velsian Adeptus Mechanicus. But, surprising enough for a man mostly made from metal by this point, Antonov discovered he still had a heart after all, and absconded with a group of slaves. Ever since, he has been the brains behind the “Road Crew”, tasked both with planning their activities and with the “maintenance” of its various members.

As you can see, I used the exact same colours on Antonov and the gladiators, with the scratched and damaged yellow armour serving as the element that really pulls the models together. I was actually happy enough with the outcome that I started to work on the next model right away. This little guy here:

Twist Witch Doctor (1)
I thought a mutant witch doctor type would nicely expand the character of the warband beyond a mere gang of pitslaves, even if this guy may initally seem a bit far out. Anyway, he’s still a little rough around the edges and needs some finishing touches, but here are some photos of the nearly finished model:

All in all, this project is a lot of fun, because it allows for some very organic kitbashing and painting. It’s also a nice vehicle for telling a somewhat more intimate story: These guys aren’t part of the fight for the Emperor’s soul, they just want to get by. That being said, it’s kinda interesting to explore the contrast between their humanity and their somewhat distressed, grotesque outer appearances.

So here’s the entire gang so far. Meet the Road Crew:

From left to right: Crusher Vexx, Tiny (the Road Crew’s battle captain), Doktor Antonov, Grimspyke, Chopper and the PIP twist witch doctor (if anyone has a cool idea for a name, I’d love to hear it).

So what’s in store for the Road Crew? I think there’ll be one or two additional members, and a suitable ramshackle ride for them — I already have a plan on that account. Keep your eyes peeled! 😉


III. A Squig-shaped Surprise

And last but definitely not least, imagine my surprise when I visited my friend Annie last week for one of our semi-regular painting sessions, only to present me with two wonderfully characterful squig-shaped dice for my Blood Bowl team, the Orkheim Ultraz:

These lovely little models can be picked up at Comixininos, and they should make for excellent turn/reroll counters for my team! And I really love how Annie painted them to perfectly match the colours of the Orkheim Ultraz:

Thanks so much for the amazing gift, Annie! 🙂

By the way, we’ll be taking a closer look at one of Annie’s Blood Bowl teams in the near future, if only to show you her fairly different approach as well as her balls-to-the-wall crazy and creative ideas for the team. You should definitely look forward to that!
So yeah, as you can see, I am finally back into the swing of things! And I would love to hear any feedback you might have — just drop me a comment or two! And, as always, thanks for looking and stay tuned for more!

Inquisitor 28: The Road Crew slowly takes shape…

Posted in 40k, Conversions, Inq28, Inquisitor, paintjob, WIP with tags , , , , , , , , , , , , , , on April 6, 2016 by krautscientist

Today I would like to share some new models from one of my recent projects with you. You probably still remember the kitbashed pit slaves I created fairly recently, along with the first ideas for a small gang of escaped former slaves and mutants from the world of St- Sabasto’s Reach (and if not, you can always go back and read up on it all here 😉 ). Anyway, here are the two gladiators I had when we last heard of this particular project:

Pitslaves (2)
I have begun to refer to this growing warband as “The Road Crew” in the back of my head for some reason. Maybe it’s because they do take a bit of an inspirations from settings like the one in Mad Max: Fury Road (as well as tangentially related settings from videogames like Fallout, Borderlands, or what have you). Maybe it’s the yellow reminding me of heavy duty construction engines? Or maybe I just like the sound of the name?

Now the next model in line for painting was this mutant brute based on the Bloodstoker from the Age of Sigmar starter box:

Mutant Overlord WIP (4)
I think you’ll agree with me that there’s a pretty obvious Mad Max vibe going on here, especially with regards to the facemask and trophy pole, right? Anyway, I painted the model, applying the recipe that had already proved fairly successful on the pit slaves.

Here’s the finished model, Tiny the Brute:

Mutant Overlord (2)
Mutant Overlord (3)
Mutant Overlord (4)

Mutant Overlord (6)
Now if you look at Tiny next to my recently completed pit slaves, you’ll see that there’s a common look and feel to the models, in spite of the new model being fairly different in nature:

Pitslaves (3)
I think the paintjob does play a fairly big part in drawing these models together into a cohesive whole, but there’s also a certain feeling of coherence beyond that. And that is really something I want to explore with this warband: a collection of models of different shapes, sizes and archetypes that still read as a fairly cohesive gang. I think I’ll be drawing lots of inspirations from classic Necromunda gangs, such as Goliaths, Pit slaves and Scavvies, but I would also like to blur the lines between those factions a bit: The hard divisions between the various gangs make lots of sense for a game like Necromunda, where you simply need several different factions. But there’s also enough overlap between the various gangs that a warband taking inspirations from several different sources should work out really well — and in any case, INQ28 is all about the grey areas and thus has little need for clearly defined borders, right? 😉

So since I really wanted to take the idea of exploring different shapes and sizes for the various gang members further, I chose something even more extreme – in a way – for my next model:

Chopper WIP (1)
Chopper WIP (4)
A diminutive mutant wielding a huge evsicerator. The model was originally one of those “bonus gnoblars” you get with several of the Ogre Kingdoms kits. I love those guys, both because they are very characterful and because it’s fairly easy to convert them into something that seems right at home in the 40k universe: In this case, all it took was a hooded head from the AdMech Skitarii Rangers, a Khorne berzerker chainsword and some odd bitz and bobs.

Painting this guy was a fairly quick affair, yet the challenge was to make the recipe I already had in place work on a model that is very different from the hulking brutes I had painted so far. In the end, it came down to featuring enough of the yellow to serve as a visual tie-in. And I had cunningly added another armour plate to the model’s right shoulder beforehand to give myself an extra yellow area 😉 Anyway, without further ado, heeere’s Chopper:

Chopper (2)
Chopper (1)
Chopper (3)
This has mainly been a quick and fun model, and I don’t really see him as a character with huge ramifications for any greater narrative, but I think he provides a nice extra bit of flavour to the warband and manages to move them beyond mere pit slave archetypes.

Funnily enough, Chopper has also managed to attract a bit of a fan club at various forums: DexterKong even mentioned his intent to put the small guy on a T-Shirt to wear at the gym. So if anyone wants to follow his lead, I whipped up a small T-Shirt design for your perusal:

A hires version of the image is, of course, available 😉

So here’s a look at the models I have so far:

Pitslaves (5)
I am pretty happy with these guys, especially since they have come together so quickly and organically. I also think they look rather striking as a group — it must be the combination of deadly weapons and that bright yellow 😉

One thing I have decided not to include on these models are hazard stripes, though, even though they might seem like a natural addition. This is something I decided right out of the gate, ecause I really wanted to suggest a slightly industrial look without overdoing it, and hazard stripes would just be that little bit too much. I also didn’t want these guy to look like Iron Warriors auxiliars 😉

So what else is in store for the Road Crew? Well, I have already started building the next member, a former Tech-Priest, codenamed “Doc” for now, serving as medicae/mechanic/possible leader?! to the escaped slaves:

Doc WIP (4)

Doc WIP (5)

Doc WIP (3)
This was a slightly fiddly conversion, because I had to make the Ruststalker legs conform to the general shape outlined by the Skitarii Trenchcoat. It all worked our rather well in the end, however, and I rather like Doc’s tall, gaunt appearance.  The mostly organic face was also a very important (and conscious) choice, as it represents a certain amount of humanity, something we don’t see often in a member of the Adeptus Mechanicus. Somehow I really like the idea of a former Tech-Priest who rediscovered a part of his humanity in the slave pits of St. Sabasto’s Reach and went rogue as a consequence.

DexterKong also suggested this guy may be the Road Crew’s “bookie” as well as their mechanic, organising fights and assignments for the group to enable them to assemble the credits and tech to keep functioning as a fairly independent outfit. Anyway, it feels like this guy is definitely a keeper!

Maybe this twist witch doctor I built a while ago would also be an interesting addition to the gang:

Witch Doctor WIP
Now he may seem like a pretty odd fit at first glance, but keep in mind that I would really like to branch out into some more out there character types: I actually want to get a bit more visual variety into this warband, so that they don’t read as merely pit slaves or mutants, but as a coalition of escaped slaves, shady characters and lost men. I think a shamanistic twist witch doctor might just be the colourful touch I need for that. He could even be a follower of a particularly devolved and archaic variation of the Imperial Creed, with the Emperor as some kind of totem?! We’ll see…

One thing that I definitely want to add to the gang at some point is this:

PickUp WIP (1)

An old Gorkamorka trukk that I’ve had in my bitzbox for quite a while. The original plan was to use it for my Traitor Guard, but it seems far more appropriate in an INQ28/Necromunda setting. Plus it would be a cool asset to have for INQ28 games in general, once painted. So I tweaked the driver a bit, making him look suitably postapocalyptic:

PickUp WIP (2)
PickUp WIP (3)
The vehicle itself needs some more bitz and bobs – a bit of additional gear here and there, but nothing too drastic. I think much of the appeal will come from a suitably grimy and weathered paintjob.

I think these models would make for some rather neat additions and create just the kind of visual variety, different shapes, sizes and archeytpes I want for the Road Crew:

New members WIP

More than anything, though, these guys really are a fun diversion, and it’s pretty cool to just go with the flow and see where inspiration takes me. Of course it goes without saying that I would love to hear any ideas and feedback you might have, so just leave me a comment or a suggestion!

And, as always, thanks for looking and stay tuned for more!

Pitslaves (4)

Greetings from the pit…

Posted in 40k, Conversions, Fluff, Inq28, Inquisitor, paintjob with tags , , , , , , , , , , , , , , , on March 10, 2016 by krautscientist

So, yet another round of fresh INQ28 models this week — I just cannot help myself, and I know far better than to second guess any motivation I might have for painting stuff. Next week, we’ll finally be taking a closer look at the models from Deathwatch:Overkill, in case you were wondering, but such review posts take a lot of time and work to complete, and at least for the time being, I would rather use this energy to actually create something new and not to merely write about models 😉

So anyway, one thing that I have wanted to do ever since I saw Bruticus’ brilliant pit slave gang last year was to build a pit slave or two of my own. A recent conversion by Legatho taught me that the combination of an Age of Sigmar Bloodreaver and a Skitarii Vanguard head would be a terrific mix to start the project, so I grabbed a Bloodreaver body, carefully shaved off all the chaotic and Khornate runes (HERESY!) and tried my best. But the model just refused to come together for some reason, and so the parts landed on my desktop, glowering at me accusingly every now and then — at least that’s what it felt like.

The project wasn’t kickstarted back into life until I started messing around with some of the – brilliantly crude – bionic limbs from the Ork Nobz kit, but when I discovered a brutal looking bionic harpoon arm among those bitz, I knew I had found the missing piece for that pit slave gladiator. And just a short while later, I had a finished conversion. Take a look:

Pitslave WIP (5)
Pitslave WIP (2)
Pitslave WIP (4)
Pitslave WIP (3)
The crude bionic arm really sells the model, if you ask me. And the Skitarii Vanguard helmet adds a sinister, quasi-robotic look that seems really fitting for a heavily augmented killing machine. For the pit slave’s right hand, I chose a standard CSM chainsword that was made quite a bit more spiky and hideous by making a few small tweaks. I also added some of the Ork armour plate and some tech-y bitz that I had shaved off from some Skitarii backpacks. Those latter parts were used to disguise the areas where I had had to shave off chaotic detailing from the original Bloodreaver model.

When it came to painting the model, I went for a main colour that I don’t use all that often: a very strong industrial yellow for the various armour plates and bionics. My reasons for choosing the approach was that I wanted the armour and augmetics to slightly recall heavy duty construction machines. Plus I thought that the gladiators in the fighting pits would go for bold colours to serve as some kind of “stage outfit”, so to speak. I did add several layers of scratches and sponge weathering, though, to make the yellow parts look suitably grimy and damaged.

So here’s the finished pit slave model. I give you Grimspyke “the Impaler”, former champion in the fighting pits of St. Sabasto’s Reach:

Pitslave Gladiator Grimspyke (1)
Pitslave Gladiator Grimspyke (2)
Pitslave Gladiator Grimspyke (4)
Pitslave Gladiator Grimspyke (3)
All in all, I am really rather happy with the finished model: Grimspyke looks suitably gladiatorial, but there’s also an Imperial underhive angle about him that removes him from his roots as a Khornate model.  In fact, I was so happy with the model that I almost instantly started converting another gladiator. Go figure…

This time, the inspiration I chose was one of my favourite classic Inquisitor models: Arco-flagellant Gryx from Phil Kelly’s seminal warband for Inquisitor Lichtenstein:

warband built and painted by Phil Kelly

warband built and painted by Phil Kelly

Back when Phil wrote about this warband in White Dwarf, he said that Gryx had been inspired by Judge Dredd’s Mean Machine — and even though I actually experimented with several different versions of my own conversion, I wasn’t happy until I had decided to recreate the one-armed look. Here’s the conversion I came up with:

2nd Pitslave WIP (1)
2nd Pitslave WIP (2)
2nd Pitslave WIP (3)
As you can see, a Bloodreaver from the AoS starter box forms the base of the conversion once again. I chose a massive Ork power claw for the right arm and cut off most of the left arm so it ended up looking like an augmetic stump where a bionic arm may once have existed. I wanted this model to explore the slightly grotesque – and ultimately rather sad – angle about pit slaves: that they are crudely augmented to serve as tools or fighting machines, divorced from their humanity and turned into misshapen creatures. This is also the reason I chose a more human head (originally from the Space Marine Scout Bikers, I believe). All in all, the model looks lumbering and lopsided, with an overmuscled look to its right side — exactly the effect I had intended.

I chose the same recipe for painting this guy that I had already used on my first pit slaves — these guys might actually end up in a warband together at some point…

So here’s the second pit slave: “Crusher” Vex, also known as “Old Man Claw”:

Pitslave Crusher Vex (2)
Pitslave Crusher Vex (4)
Pitslave Crusher Vex (3)
Something that doesn’t show well in most of the pictures is that I have added some greying fuzz to Crusher’s head:

Pitslave Crusher Vex (5)
I wanted to show that he’s a rather old guy, and definitely well past his prime as a pitfighter.

And here are the two gladiators together:

Pitslaves (1)
“The championship match between Grimspyke and Crusher Vex? One for the ages, that was! I’ll never forget when Grimspyke took Crusher’s arm clean off during the fifth bout!”

“Shug” Holn, Sector 2 Habber


For now, these are mostly a fun little diversion. But I do like the idea of spinning these off into their won little warband at some point. I don’t even see these as members of a simple pit slave gang, either, but rather as a crew of former pit slaves, mutants, workers and other malcontents. In fact, they would work great asa warband hailing from the world of St. Sabasto’s Reach that DexterKong and I invented for the Velsen Sector. Here’s the outline for the planet that I wrote a while ago:

St. Sabasto’s Reach

An extremely rich hive world grown fat and depraved through slave trade and the exploitation of its mutant lower class.

The world originally earned its name when the Imperial Saint Sabasto rested here after his great victory on the fields of Belzifer, before engaging in the last stage of his holy crusade for the defense of Velsen against the forces of the Arch-enemy. While Sabasto’s crusade army was still magnificent at this point, it had also suffered heavy losses (a fact, it is argued by some contemporary Velsian historians, that contributed to Sabasto’s eventual defeat within the Veil of Impurity).

When the Saint contemplated the price in blood paid for the reclamation of Velsen, he decreed that the entire world of St. Sabasto’s Reach would be given to the orphans of the slain and that the Imperium would see to it that the children of martyrs would never need to go hungry. This spurred the planetary populace into religious fervor, and countless orphanages and scholae were opened in the saint’s name, earning the world bynames like “The Planet of Orphans” or “The Orphans’ Cradle”.

However, with a slow decline in piety and a general economic recession, many of the world’s orphanages have had to close over the centuries, while others have turned to a far darker trade, giving the world’s epithet a new, sinister meaning. It is true that Imperial organisations like the Schola Progenium, the Ecclesiarchy and even the Inquisition still maintain a presence on St. Sabasto’s Reach and recruit from the ranks of the homeless orphans, choosing the most talented or devout to serve in their respective organisations. And in the deeper levels of the world’s hives, missions and orphanages still offer a real, if meagre, chance for survival to this day. Yet that is only one face of St. Sabasto’s Reach. For at the same time, the world has also become the biggest fleshmarket in the entire Velsen Sector, providing human resources in a very literal sense, from mutant workers to household servants. Moreover, it is rumoured that there exists a slave for every kind of service in the almshouses and slave pits of St. Sabasto’s Reach, and the masters of the world have long prided themselves on being able to cater to every taste and desire, no matter how “eccentric” it may be.

Another mainstay of the world’s culture, the countless circuses and fighting arenas, are also fueled by a constant influx of “material” from the slave pits. At one point, the world’s renowned Circus Imperialis served as a front for a cult of chaos worshippers and was purged by the hand of Inquisitor Antrecht. But even after this upheaval, the remaining slavelords and ringmasters of St. Sabasto’s Reach quickly regained their step, slightly realigning themselves in the resulting power struggle and carving out a new pecking order among themselves. Because the Inquisition’s issue was never with the slave trade itself, but with the presence of heretics, and so the House of Blossoms, the Angelflesh Lodge and countless other establishments like them continue to ply their dark trade to this day…


I think a group of former slaves would be an interesting concept, plus it would allow for all kinds of different character types, including pitslaves, mutants, workers and some more exotic members. I don’t consider this a high priority project at the moment, but it’s still a fun diversion. In fact, this mutant overlord that I built recently, using the Bloodstoker from the AoS starter box would also make for a great member of that particular warband:

Mutant Overlord WIP (4)
Mutant Overlord WIP (2)
Mutant Overlord WIP (3)
As it happens, the Ork Nobz kit provided the final missing piece for this model as well: a crude trophy pole that looks great on the mutant’s back:

Mutant Overlord WIP (4)
I am normally *very* reluctant about adding back banners or trophy poles to models, because they end up looking very silly more often than not, messing up the model’s silhouette. But I thought this guy needed that precise pole ever since I started building him, and I like it a lot. It also has the added benefit of adding another layer to the model, so to speak, as the base model is surprisingly two-dimensional.

Anyway, I think this could become a rather interesting project somewhere down the line! Keep your eyes peeled! 😉

For now, I am happy enough with my first two pit slaves, though:

Pitslaves (2)
Let me know what you think! And, as always, thanks for looking and stay tuned for more!

Meanwhile, aboard the Arrke… pt.2

Posted in 40k, Battle report, Conversions, Inq28, Pointless ramblings with tags , , , , , , , , , , , on April 19, 2013 by krautscientist

It’s been almost a week since the last game set aboard the Arrke, and a huge cache of delicious information about the event has since turned up on the net. So like I promised, let’s take another look at this strange and demented world, and let me finally show you my dear Legion in action:

I’ll be honest with you: After having sent the model to England, I was of course dying to know how it would all play out: Would Legion fit the overall aesthetics of the game? Would he blend in well with Neil’s fantastic board? Would John Blanche and all those other talented guys like the model?

And then I checked my e-mail account on Saturday, to discover that none other than John Blanche himself had sent me a snapshot of Legion in action:

Legion at home (1)

Look at you, Hacker! …no, wait, wrong game!

I really couldn’t have been any happier! And I am only a little ashamed to admit that I spent quite a while during that afternoon repeatedly pressing F5, in order to see whether there were any news from the Arrke. And, indeed, John was good enough to send me multiple pictures during the game. Thanks so much, JB!

By all accounts, it must have been a fantastic event! And now that lots and lots of pictures from the event have started turning up, everybody can see the glory of it all: The amount of crazy modelling and painting talent on display was stupenduous. And what’s more, PDH somehow managed to weave it all into one game and one narrative, even though it must have been a pretty busy afternoon aboard the Arrke.

Anyway, let’s take a look at some more photos of our favourite insane AdMech monstrosity, shall we? All of the following pictures were very kindly provided by Neil101, by the way.

Legion at home (2)

Legion emerging from the Arrke’s dark nooks and crannies. Check out that fantastic, flaking paint on the wall in the background!

Legion at home (8)

Some time later, Legion is gazing across the derelict and rusty halls of the Myth Shippe from a lofty vantage point.

Legion at home (5)

And finally, having arrived at the banks of the vile Sump, Legion casts a contemplative glance across the frothing waters — awfully introspective for a biomechanic monstrosity, isn’t he?

Legion at home (6)

I really love how the Cult of the True Journey’s sniper seems to be drawing a bead on Legion in this picture

And finally, what has to be my favourite picture of Legion to date, taken by Fulgrim:

Legion at home (7)
As you can see, Legion does indeed look like he’s emerging from the very underbelly of the Arrke itself. I am very pleased that I managed to achieve that!

So what about all the other amazing models? Though I would like dearly to post them, I won’t do that. Not in order to keep all the glory for myself, mind you: I think you should really head over to the other guys’ respective blogs to check out what they have to say about their marvelous creations! And don’t fret, I’ll provide a handy list of links for your perusal. You ABSOLUTELY need to check out this stuff! Seriously!

To begin, Fulgrim has started a brilliant writeup of the event, introducing all the different gangs and walking us through the narrative (with lots of pretty pictures):

Arrke retour

Part I
Part II
Part III

I imagine the series will be running for the rest of the week. And I, for one, can’t wait to read more of this stuff!


Then there’s JRN’s Sump Huntress Hanin. A class act, as usual!


The Spiky Rat Pack don’t disappoint either, with Kari posting his brilliant Stryderre, complete with sinister poetry, and Mikko’s Living Coffin following hot on his heels.


And finally, be sure to check out PDH’s Yggdrassillium threads at Dakka and the Ammobunker. Again, lots of pretty pictures and well deserved awe.

And while you’re there, don’t forget leaving a nice word or two for PDH himself: It only becomes clear now what a spectacular job he has managed to pull off with this: Models from several countries, lots and lots of characters, and he even had to GM the whole thing. The mind boggles!


So, once again, a million thank yous to everyone involved! It’s been a pleasure, and I have certainly never had so much fun with an event without even being present 😉

To wind up this post, just because I can, let me share a picture of Neil’s spectacular Arrke board:

Legion at home (4)
The only question is: How are we ever going to surpass this? 😉

In any case, thanks for looking and stay tuned for more!

Meanwhile, aboard the Arrke…

Posted in 40k, Conversions, Fluff, Inq28, paintjob, Pointless ramblings with tags , , , , , , , , , , , , , , , on April 13, 2013 by krautscientist

I’ve stated before that interacting with other hobbyists in general and blogging in particular can offer many exciting hobby opportunities. Today, I would like to show you one particular project that only happened because of the exchange between various bloggers and hobbyists. It’s also one of the most exciting hobby opportunities I have ever had, but all in good time. Now, what is this about?

If you frequent the same, dark corners of the 40k blogosphere as me, you may have heard of the Arrke and the Yggdrasillium Pilgrimage (unnervingly, never to be spelled quite the same way twice 😉 ) — and if you haven’t, let me give you the gist of it: Some time ago, a group of players including, among others, PDH, Neil101, Fulgrim and none other than John Blanche himself, started playing a series of games set on the “Arrke”, a huge, derelict fusion of countless vessels drifting through space. This huge space hulk is home to many demented and strange people and creatures, yet it is also so ancient and so enormous that most of its denizens have forgotten that they are actually living on a spacefaring vessel in the first place: What remains of their original respective cultures and backgrounds has become as warped as their bodies and minds, and the ship itself has become a world unto itself, encompassing both a strange and unforgiving ecosystem as well as a sinister and unique society. The initial idea for this vessel came from John Blanche, and all of the events play out on the breathtaking “Yggdrasilium” table built by Neil101. I’d love to link you to Neil’s blog to give you a chance to learn more about this fantastic adventurescape, but alas, he has decided to delete it. You still can (and definitely should) check out his Dakka thread on the subject, though, along with Fulgrim’s blog and PDH’s thread, describing the gang of chaos misfits he built for the games aboard the Arrke.

Anyway, I learned of these games and the strange world they were set in through the various threads and blogs linked above, and I was fascinated by the whole project: These guys were basically using tweaked Necromunda rules for their games, yet they had come up with something entirely unique on both the narrative and modelling/painting side of things. So I gobbled up all that I could learn about the Arrke and its denizens and kept marveling at the sinister brilliance of it all.

Now, imagine my surprise when PDH contacted my with a very special proposal: He suggested that a couple of hobbyists (PDH himself, Tears of Envy, Migsula, Jakob Rune Nielsen, First Points of Aries, Kari and Mikko from Spiky Rat Pack and me) should each build and paint a character to be used in the next game set aboard the Arrke. We could come up with whatever character we wanted, provided it fit into the setting. And all of the models would be given to John Blanche as a gift after the game.

I think it’s quite obvious by now why an offer like that would have me very ecxited indeed.

Anyway, I was really honoured that PDH would include me in this, and I was quick to accept. The next days were spent pondering what kind of model I wanted to contribute. And I quickly realised that I wanted to do some kind of Adeptus Mechanicus character, or, at least, creature. And, given the background, the character would have to be really creepy and sinister. That was quite a challenge, because members of the Machine Cult can be scary enough on their best days, but I was gunning for something even more disturbing…

So I asked myself: Why would a priest of the Ommissiah board the Arrke in the first place? And what could go wrong if he did? Drawing inspiration from all kinds of sources, ranging from everything ever done by David Lynch to videogames like System Shock 2 and Bioshock and to the decidedly lowbrow, yet horribly visceral horror film Virus, I came up with the concept of a band of Adeptus Mechanicus explorators, boarding the Arrke in search of lost technology and being transformed into something …else.

And thus, Legion was born.

Here’s my initial concept for the character:


The creature known to the denizens of the Arrke as “Legion” is what remains of an enterprising group of Explorator Magi, sent out by the Tech Priests of Mars. The Magi were sure that the ancient vessel would house an unfathomable cache of lost technology and miracles from the Dark Age of Technology. They were right in this, yet the price for such knowledge would turn out to be far greater than they had envisioned.

A team of explorators, accompanied by their Skitarii retinue, came aboard the Arrke and began a quest to uncover the ancient ship’s technological secrets. Initially, the Magi were pleased, for there were many secrets uncovered, and much was learned. They were already considering themselves heroes of their order and imagining their triumphant return to Mars with their many discoveries in tow. Alas, it was not to be.

For the Arrke does not take kindly to strangers, and so the explorators found themselves beset on all sides by the vessel’s strange and demented denizens as well as by environmental hazards and the powers of the Warp. With their Skitarii bodyguard all but wiped out, and some of the Magi themselves succumbing to the hostile environment, the Tech Priests did the only logical thing: They pooled their resources, in order to protect the valuable technological knowledge they had acquired: Whenever one of them was critically wounded, his working remains would be integrated into another Magos’ brain and body, thus protecting the knowledge and strenghtening the survivors. The remaining Magi thus became walking treasure troves of knowledge. But something went wrong.

Maybe it was the taint of the Warp, maybe it was the desperate nature of the Tech Priests’ struggle, but their fusion turned out to be flawed and incomplete. Corruption slowly seeped into their neural engrams, and what would normally have been a standard procedure for the disciples of the Mechanicum slowly turned into a nightmare.

The resulting creature is a horrifying amalgamation of the explorators’ bodies and minds, malformed and insane, its mind fractured into countless shards, its body misshapen and terrifying, yet utterly deadly. Legion now eternally prowls the deepest reaches of the Arrke in its half-remembered quest to find a way back to the red star. But even though a wealth of technological information and scientific marvels still lies protected within the creature’s twisted shell and mind, one shudders to imagine what would happen if the erstwhile explorators would somehow manage to escape their eternal prison and be let loose upon the galaxy…


With this basic idea outlined, I thought about what I wanted Legion to look like. Like I said, tech priests are scary enough in any case, so I tried to come up with an even more strange and corrupted look exploring the fusion of organic and machine parts, with a generous helping of body horror ladeled on top. Here’s a – very early and horribly rough – sketch of Legion:

As you might be able to tell, I wanted to use the plastic Cairn Wraith as the base for this conversion, even at this early stage. Several people have used the model to great effect to convert disturbing AdMech characters, so I thought this was a good base. I would then add all kinds of technical bitz as well as two very creepy “tendrils”, secondary creatures serving as additional parts of Legion. All of the creature’s different components would have sinuous, serpentine bodies, the better to move and wiggle through the Arrke’s dark nooks and crannies.

Obviously, the first step was to get the plastic Cairn Wraith, so of course that was where everything started:

Legion WIP (1)
I just used the Cairn Wraith’s cloak, discarding the scythe, inner body, face and base. I used a 40k servo skull as a replacement head, and the remains of a lasher tendril from the Forgefiend kit served as the base of Legion’s serpentine body. In the picture above, you can see the first basic build, attached to a Terminator base with a lump of putty.

I then added more and more technical bitz and doodads to the main body, making it look more and more like something that had originally begun its existence as a tech priest. Here’s the finished main body:

Legion WIP (2)
Legion WIP (3)
Legion WIP (4)
Legion WIP (5)
The most obvious addition was that of a GK Psy-gun on the model’s back, both to give it some potential oomph on the table and to create a strange, malproportioned look. I also added a ghoul hand to give the model a clawlike, organic left hand, and a vestigial arm from the Dark Eldar Talos/Cronos kit for a wicked looking scalpel-like right hand. To represent the “neural network” created by several Magi being fused together within Legion’s body, I added an additional servo skull beneath the first one, as well as two more “regular” skulls. I imagine the actual body beneath the cloak to be a horrible cluster of skulls plugged into each other with cables, serving as what is, for all intents and purposes, the 40k version of a Local Area Network.

The next step was to build Legion’s secondary tendrils. Once again, I used leftover lasher tendril pieces for a serpentine lower body. The rest of the tendrils was built from different Zombie and undead parts, more vestigial Talos arms, a couple of cables and some Greenstuff.

Here’s a very early mockup of the first tendril:

Legion WIP (7)
While the look was there, I wanted the tendrils to be far more disturbing and horrible. So I tried my best to make the tendrils look even more malformed and disgusting. Here’s the same tendril, some time later:

Legion WIP (13)
Legion WIP (12)
Legion WIP (11)
I wanted Legion to look like its transformation and evolution had not been a well-planned process but had rather happened spontaneously and chaotically. So this tendril looks like the body of a Magos has been crudely grafted onto the serpentine body, with only one arm remaining. Greenstuff was used to create a crude seam between the organic and machine parts.

I wanted the other tendril to look more combative, so I added an additional arm, with two of the creature’s arms tipped in cruel claws and blades:

Legion WIP (8)
Legion WIP (9)
Legion WIP (10)
Crude bionic eyes were added to a flagellant head to make the face look inhuman and threatening. I also added a cable from a servo skull as some kind of horrible, proboscis-like tongue.

When it came to actually painting the model, I wanted to achieve a striking contrast between distressed flesh and cold, oily metal. I began with the tendrils, picking out the major areas in different colours:

Legion WIP (19)
Legion WIP (18)
Legion WIP (17)
Legion WIP (16)
Legion WIP (15)
A combination of different washes (mostly Ogryn Flesh, Leviathan Purple and Baal Red) was used to make the skin look bruised and sickly. The metal parts were heavily washed with GW Nuln Oil to give them a dark, oily look.

Legion’s main body was painted in a similar way, although I decided to paint his cloak a striking red, in order to make him more recognisable as a former member of the Mechanicum. I had originally planned to make the red look bleached out and dirty, but seeing the cloak after painting it with GW Mephiston Red, I realised that this kind of spot colour was just what I wanted:

Legion WIP (23)
Some washes were used in the recesses of the cloak, though, to at least make it look suitably dirty and grimy. As you can see, I also added a striking blue to the different bionic eyes to create a point of focus.

And in the picture below, you can see the additional skulls in Legion’s stomach region quite well:

Legion WIP (24)
I’ll be honest with you: It took ages until I was finally satisfied with the different parts of the model. But a challenge like this doesn’t happen every day, so I absolutely wanted to give it my best shot.

When all of Legion’s components were finally finished, I still had to build and paint a base and decide how the different parts of the model should be attached to it. In my initial drawing, I had planned for all tendrils to emerge from under the red cloak. But not only did that seem pretty hard to get right, but I also realised that it would potentially be far more creepy to have several tendrils emerge from the same hole in the ground, making it look like the three aspects of Legion were maybe just tendrils of a much larger creature…

One interesting option would have been to have the different parts of Legion on different bases. That would also have allowed for some pretty interesting rules options. In the end though, due to the time allotted for the project,  I chose to rather go for one really cool base instead of three okayish ones. But if there had been more time (and if I hadn’t been so damn lazy), I might have put the different tendrils on multiple bases.

When it came to the one base I did want to build, I wanted it to blend into Neil’s fantastic Yggdrasillium board as well as possible, making it look like Legion was emerging from the very surroundings, not so much a character but rather an environmental hazard. I wanted to create some kind of opening or pipe for Legion to emerge from, so I built a basic construction from a Predator turret hatch and plasticard pieces I cut from an old phone card. Then I heavily coated the construction in wood glue to close all the gaps and create a bulgy, warped surface. And I added modelling sand and small pieces of cork on top to create dirt and gravel. Then the whole thing was undercoated black. Here’s a test fit of Legion’s body parts on the undercoated base:

Legion WIP (25)
When painting the base, I let myself be inspired by PDH’s fantastic scenic bases, trying to make it as rusty and grimy as I possibly could. I painted the whole construction a dark green, with the dirt and gravel picked out in brown. The whole base was then liberally washed in GW Agrax Earthshade. Then I used thinned down GW Vermin Brown as a wash, creating a rust effect. And finally, The edges were picked out in GW Boltgun metal to show scratches and nicks in the colour, with the metal appearing beneath. Here’s the finished base:

Legion WIP (27)
I also added some Tamiya Clear Red to one side of the grate, making it look like Legion had dragged some unfortunate victim to its doom…

Legion WIP (28)
Oh, and I used a hazard stripe decal from the CSMs decal sheet, suitably aging and weathering it along the way:

Legion WIP (26)
And so it finally came to attaching all the parts of Legion to the base. Finding a configuration that worked took some doing, but in the end, I succeeded. So without further ado, I give you Legion:

Legion (16)
Legion (21)
Legion (22)

Legion (25)
Legion (27)
Legion (20)

Legion (19)

Legion (18)

Legion (24)
Legion (28)

Probably the biggest part of the adventure was actually sending Legion to England. But the postal service didn’t let me down for once, so everything went well. Now, looking back on the model after having spent so long working on it and obsessing over every detail, I am not really sure how to feel about it. I am happy with the model, without a doubt, but will it hold up when stood alongside models from enormously talented artists such as PDH, JRN and the Spiky Rats? Don’t get me wrong, I am really happy with how Legion turned out, but all the small imperfections are also driving me up the wall at the same time 😉
Maybe it’s just the fact that I will actually have to let some very talented people take a firsthand look at this piece — so no hiding behind fuzzy photos this time! And, of course, I hope John Blanche himself will like the model. Oh well, there’s no crying over spilt milk, I guess…

In any case, what really surprises me is how close the finished model is to my inital sketch. I am also amazed by how much I found myself thinking about Legion as a character…or at least, as a creature: I have a very vivid (and actually quite unpleasant) image of Legion in my mind: a creepy and sinister figure, perpetually surrounded by disturbing whispers and bursts of corrupted code language as the remains of the integrated Magi are communicating and argueing, with some of them almost perfectly sane while others are completely mad, full of rage, or just spouting untintellegible gibberish (I don’t know if any of you are into videogames, but if you are, picture the different cores of GlaDOS in Portal, or the different voices of the dark goddess Xel’ lothat in Eternal Darkness, turned up to eleven, and you’re not too far off the mark).

One of the personalities could be ceaselessly reciting the Mechanicus main tenets. Another might still be sane enough to broadcast intelligible Imperial/Mechanicus distress signals (System Shock 2, anyone?). Still another might be constantly reciting all kinds of disturbing Madness Mantras  (“We are many. We are one. We are many. We are one…” or  “Make whole that which was shattered. Make whole that which was shattered. Make whole…”). Also, PDH came up with this disturbing image of some of the denizens of the Arrke hacking into some random cable or mechanical bit during their exploration of the ship, then hearing bellowed binary screams and see the cable retracting, only to be faced with one of Legion’s “tendril creatures”.

Then there’s also that idea I briefly outlined above: Maybe those three tendrils aren’t really the whole creature, but only points of interface with the outside world, not unlike the lure of an Anglerfish. Maybe they connect back to the lair of the actual creature: a subterranean cavern filled with cogitators and technical equipment, much like a dragon’s hoard. The real Legion resides within this cavern: a vast, entropic and incomprehensible creature…

So, in any case, I think the concept of Legion is really just as disturbing and creepy as I wanted it to be. Whether the actual model lives up to it is not for me to decide, yet of one thing I am sure: Legion makes for a fitting new denizen for the mysterious Arrke…

So, to wind this up, let me give you one more picture of Legion, along with a broken little nursery rhyme that I came up with — written in true Yggdrassilliumme style 😉

Oh, and should you wish to use Legion (or something like Legion) in your games of Necromunda, number cruncher and all around great guy PDH has you covered with some rules he cooked up:

Legion (26)

In the bowels of the shippe
Dwells a being most unkynde
Knowledge wyll from metal strippe
Passage to the red starr fynde.

Legion, Legion, he is many.
Legion, Legion, they are one.


4 3 3 4 4 2 4 D3 10

Weapons – Laser Blaster, Mechanical Claws

Short Long Short Long Strength Damage Save Mod Ammo
0-8 8-24 +1 3 1 3+ Sustained Fire Dice

Binary Scream (Fear),  Immune to Psychology, Never Pinned 

Fractured Psyche: At the beginning of each turn, roll on the following table to determine Legion’s actions

1-2: Flesh is weak. Purge the organic! – 50/50 chance of shooting or charging.
3-4: Obtain knowledge – Will move towards the nearest mechanical object/terrain and then spend the turn examining it.
5-6: To the red starr! – Will move as quickly as possible in a random direction. If Legion comes into contact with a model, it will count as charging but will break off from combat at the end of the turn, continuing to get away.


So yeah, I realise that was quite a post! I understand the game in question has already taken place earlier today, so there’ll be some quite a bit more information soon, I guess. Look forward to learning more about Legion in action, as well as about the fantastic entries from all the other hobbyists involved.

Until then, I’d be happy to hear any feedback you might have on Legion, so drop me a line or two in the comments section!

And, as always, thanks for looking and stay tuned for more!

Barricades – quick and easy

Posted in 40k, DIY, Inq28, Terrain with tags , , , , , , , , on October 26, 2012 by krautscientist

In between all the painting and kitbashing, let’s take time for a quick and easy recipe for building your own scatter terrain for games of 40k, Necromunda, Inquisitor 28 (or any other skirmisher, for that matter). This is something for slow days, when you want to get something done on the hobby front, but don’t feel like breaking out all the colours and really going to town on a model. Let’s take a look at barricades.

For me, everything started when I saw this picture on DRommel’s Savlar Chem-Dog plog (very much worth visiting, by the way!) over at Throne of Skulls. There I saw this:

Image appears courtesy of DRommel

This barricade looked quite excellent and fairly easy to duplicate at the same time to me. So, full of inspiration, I sat down to reverse-engineer DRommel’s recipe and build my own barricades in very short time with nothing but leftover stuff. Here’s how:

I. What we need:

Here are all the ingredients. The good news is that you will probably have most of this lying around anyway 😉

Some pieces of foamcore. For this you can basically use all the leftovers from other projects. You’ll need a couple of longer cuts, though, to make the bases for the brarricades.

Some corrugated cardboard. This comes in all shapes and measurements. Be sure to use cardboard that’s easy enough to cut. This will make for very convincing corrugated metal and help to break up all the otherwise smooth foamcore surfaces.

A couple of bitz. Anything goes here. Choose whatever you find at the bottom of your bitz box. Vaguely technical looking parts are best. I used some parts from an old model truck and some stuff from an old military terrain kit. Oh, and pieces of leftover sprue make for great sharpened stakes! And we all have tons of that stuff lying around, don’t we?

If you want to follow this recipe, you’ll also need some basing materials. Sand, cork, whatever you like.

Right, let’s get started, shall we?

II. What to do:

I started by drawing the outlines for the bases on some bigger pieces of foamcore, using a 40k bike base as a template. You can make all of the bases the same lenght, although it may be a good idea to make some longer and some shorter ones for added flexibility. I cut out the bases using a craft knife.

Then I beveled the edges of the bases with my knife. I did this so they would look more natural on the tabletop. Don’t worry if your bases – like mine – do look rather messy at this point: We’ll be able to fix that shortly!

I cut smaller pieces from the leftover foamcore and corrugated cardboard. These pieces form the main body of the barricade, so make sure to have a nice selection of different lenghts. The less rectangular the shape, the better.

I then glued the smaller pieces onto the bases using wood glue. I tried to make this basic construction look pretty haphazard, like random pieces had been collected and thrown together.

Then I added the corrugated cardboard to add some additional variety…

..and repeated the same step with the leftover bitz, sharpened pieces of sprue etc. At this point, the basic construction was finished.

Then I added my basing materials to the bases, using wood glue to glue them down. In this particular case, I used a mix of GW modelling sand and small pieces of cork. I also used the glue to seal all open areas of foam, so the foam wouldn’t disintegrate during the next step.

Then everything was painted using cheap spray paint from the craft store. I chose brown as a basecoat because I wanted the barricades to have a rusty, dilapidated look.

As you can see, the unified paint did a great job of tying together all the disparate parts. I then stippled GW Vermin Brown onto the barricades, creating patches of rust. Then I drybrushed the edges of the barricades with GW Boltgun (also stippling on some more Boltgun Metal). Then I painted thinned down Vermin Brown into the recesses — especially on the corrugated cardboard! The sand and cork on the bases were drybrushed with GW Bleached Bone. And lastly, I used GW Nuln Oil to paint on patches of oil, grime etc.

Here are the finished barricades:

This was the easiest recipe I could think of. These barricades come at basically no cost, and you’ll be able to churn out a ton of them in no time at all! Of course you can add some more variety by adding different colours, propaganda posters and all kinds of bitz. Ultimately, this may be the easiest terrain project I have ever done (and probably the one with the most bang for the – nonexistent – buck!).

Let’s wind up this post wit some shots of the barricades and some models. These photos also show you how flexible the barricades are:

Some twists behind a single barricade

A gang of twists defending their ramshackle fortifications

Scatter terrain like this will come in handy during games of Inquisitor or Necromunda. And, as I have tried to show you in this post, it’s ridiculously easy to built, at basically no extra cost!

Thanks to DRommel for the inspiration, and as always, thanks to you for looking! Stay tuned for more!

Modular industrial terrain – quick & easy

Posted in 40k, DIY, Inq28, Inquisitor, Terrain with tags , , , , , , , , on September 14, 2012 by krautscientist

I’ve been looking at different options of building some modular terrain for use in games of 40k and Inquisitor for quite some time now. After building a silly amount of cityfight terrain (that eats up an equally silly amount of storage space), I was a little hesitant to undertake the next terrain building spree: I felt that any new terrain had best be very versatile and modular for maximum usefulness. It would also have to be easily storable, so no more cathedrals for the time being…

Then, while shopping for boring stuff at the DIY-superstore, I came across these:

Now I couldn’t even tell you what these things are normally used for – especially not in English. They are used by electricians when working on electrical outlets or something — pardon my spotty knowledge when it comes to electrical installations.

But I instantly realised that these could be really useful for a terrain project: The smaller part seems immediately useful, and you may call me crazy, but the longer piece gave me an almost art deco vibe. Does that make sense?

Anyway, those were super cheap, so I picked them up and got to work:

What I wanted to try with these was to create some simple, highly versatile and modular industrial terrain that could be used for 40k but would be even more useful in games of Necromunda or Inquisitor 28. So I put each of the pieces on a base cut from foamcore and added a couple of bits:

To the small piece, I added a couple of small brass tubes I had lying around as well as some corrugated cardboard, cork chaff and one or two pieces from an old model truck. And behold, the thing was instantly transformed into something looking very …industrial.

I did something similar to the longer piece, adding some bits to give an idea of scale to the whole thing and to make it more interesting visually. Here’s the result:

All of this was really quick and easy work, and I only needed some leftover materials and a couple of bits. I then spraypainted both pieces with brown paint, since I would probably end up going for a rather dusty and dilapidated look amyway.

As usual, the uniform paint helped to tie everything toegther. I think it’s immediately obvious how this could work as a piece of terrain. Here’s a scale shot with an 28mm model:

The other piece got the same treatment. Lo and behold:

And again, with a model:

Granted, one of these alone is fairly unimpressive. But imagine several of those pieces that can be freely rearranged to create all kinds of different setups: You could simulate corridors or a kind of labyrinth. And the fun doesn’t end there: Just build a number of modular walkways to connect the different pieces and add some verticality. Or add some taller buildings for even more variety. These pieces could even be combined with my regular cityfight terrain! And the fact that they are fairly small and robust also makes them rather easy to store — what a relief!

Of course, these pieces will yet have to be properly painted, probably with huge amounts of weathering and rust. I could also add all kinds of security warnings and/or propaganda posters for more authenticity and that particular underhive look.

It probaly won’t surprise you when I tell you that I went back to the store the next day and got a whole bag of those pieces. About 8 Euros gave me enough stuff to fill up quite a lot of space on a normally sized Necromunda/INQ28 table. I’ll keep you updated on the progress!

Sometimes it’s lucky finds like these that makes building your own terrain that much fun! But then, maybe it’s just Karma’s way of paying us back for all the hours we spend sitting hunched over little plastic men. Who knows? In any case, whenever you’re at an DIY-superstore, keep your eyes open for useful stuff like this. It may make your visit to the store just that much more enjoyable 😉

As always, thanks for looking and stay tuned for more!