Archive for June, 2019

State of the Hunt, Week 26/2019: First Contrast Paint impressions

Posted in paintjob, state of the hunt with tags , , , , , , , , , , , on June 24, 2019 by krautscientist

Something of an interlude for today, since I got the unplanned opportunity last week to get some hands-on experience with the new Contrast Paints and would like to share a couple of observations, as well as some photos of my two test models.

Be advised, however, that this post won’t be an in-depth review — if you are that way inclined, let me point you towards this excellent article over at Tale of Painters for an actual, thorough all-corners review. This is basically just me fooling around with a new toy πŸ˜‰

I was, of course, interested Already seeing some intriguing stuff online and getting some encouraging pointers from fellow hobbyist-recently-turned-TeeVee-superstar Jeff Vader. So when the opportunity to test the paints arose at the local Warhammer store (now again crewed by a very decent store manager, I must add), I got straight to work.

 

Anyway, all the Space Marines were already taken, so I ended up with a female Stormcast Sequitor (one of my favourite easy to build models, though, so all was well) and a Poxwalker. Both of the models were already glued together and undercoated when I started working on them. Here’s what I came up with during my time in the store:

The Sequitor took me about 45 – 60 minutes of fairly neat painting (and of getting to grips with the new paints in the first place). Quite a bit of the time was also spent trying to wedge my brush into all the nooks and crannies behind the shield, as the model had already been glued together beforehand.

The Poxwalker, by contrast, was a crazy and fun 15-minute-romp of just letting rip with some of the pinks, purples and yellows.

Before we jump into the fray, let me just say up front that the freeflow, (water-)painterly way of painting these models was quite a wonderful change of pace! As was the freedom of simply painting something for the heck of it, with absolutely no danger of messing up whatsoever. So if nothing else, you should maybe give those paints a go at your local store, if only for the process to act as a wonderful little palate cleanser.

Anyway, let’s take a closer look at the two models and my experiences when painting them:

The Sequitor came undercoated with Grey Seer, the slightly greyer, colder undercoat from the recent release. I decided to go with a the main approach of black armour, red robes, as seen in N1SB’s Contrast Paint experiments here, because I really liked the look of the combination (plus it’s also a pretty fair approximation of a classic Sisters of Battle painting scheme, which was an added bonus).


Only a single coat of paint was applied on all parts of the model (except for the base, where I got a little more adventurous — more on that in a second). This should tell you how the new Contrast Paints really allow you to cover a lot of ground in a very short amount of time. In hindsight, I think I should have been a little more generous with the black, as the shading effect didn’t turn out quite as prominent as I would have liked. Even so, the Black Templar Black (for the armour) and Flesh Tearer Red (for the robes) were definitely the standout paints here, although the Fyreslayer Flesh skin tone came in at a close second (it’s really uncanny how the Contrast flesh tones actually allow you to paint a finished face in one painting step).

As for my initial observations:

  • I didn’t encounter any cases of splotchiness with the new paints, although I have to say the Sequitor was basically the perfect model to use these on, given the amount of surface texture, folds in the fabric etc. Everything dried fairly quickly and to a nice, matte finish.
  • not using metallic paints on the areas that are supposed to be metal was a very weird feeling, and I felt the need to break out the silver and gold on the Sequitor, in particular when it came to painting the weapon and shield.
  • Due to the fact that, as you have probably already heard elsewhere, Contrast Paints basically work like a heavy wash or a wood stain, you don’t simply get to paint over mistakes you have made, but may have to correct them by painting over any stray marks with Grey Seer or Wraithbone from the pot. Even though I only went back to correct one or two mistakes, I found this to be the least entertaining part of the whole exercise, especially since going back to the somewhat chalky undercoats after working with the free flowing Contrast Paints was such a stark, erm, contrast.
  • As I was warned by the store manager – and as I have discovered myself – models painted with Contrast Paints really, really need to be varnished, as it’s quite easy for the paint to get rubbed off. This happened to me once or twice during the painting process, although only on very small, sharp areas (such as the sharpest folds in the Sequitor’s robes).

So after spending about an hour neatly painting the Stormcast Sequitor, I simply wanted to have some quick fun and experiment a bit, and the Poxwalker model seemed like the perfect piece for that. Like I said, the painting process was just a wild 15 minute ride. The Poxwalker was undercoated with “Wraithbone”, the warmer of the two new undercoats, and it makes for a wonderfully vibrant overall look on the finished model. The “Darkoath Flesh” skin tone basically did about 70% of the work, and afterwards it was mainly a matter of painting on some pinks and purples while the skin tone was still wet:


If it’s Nurglite grossness you are going after, the Contrast Paints are just perfect, making for a very organic look. The augmetic arm was basecoated with Gryph Hound Orange, and then I slathered on one of the darker browns.

I think it would be really easy to knock out a rather massive hore of Poxwalkers in an afternoon with a recipe like this, which seems like a very interesting proposition.

 

But wait, I didn’t stop there, but rather took the models along to my painting session with my good friend Annie. I wanted to try and combine the base work done with the contrast paints with some of my usual techniques. So here are the models, once again, when I packed up at the Warhammer store:


And here’s how they look now:


For the Sequitor, I resisted to urge to break out the metal paints after all, and decided to keep her entirely “NMM”, for lack of a better word. I merely added some highlights here and there, especially where the red hadn’t “auto-shaded” quite as much as I had hoped:




Just to illustrate how easy it is to cover lots of ground with the new paints, however: The act of adding some highlights and finishing the paintjob took just as long, if not longer, than the entire stage of painting her with Contrast Paints (and getting her basically game-ready) beforehand!

One thing I only got to experiment with a bit was to use various browns and greens for a more natural, mossy look for the base. I only really tried a bit of this, but I think the use of Contrast Paints for painting really interesting looking bases definitely warrants some further experimentation!



The finished base was given a light drybrush of Screaming Skull and (of course) a tidied up black base rim πŸ˜‰

In hindsight, I am not 100% sold on the look of the Iyanden Yellow: When it works, it really works, but it ended up looking slightly anaemic in several spots. But Nazdreg Yellow, seen here on a model painted by Annie, seems to be an interesting, slightly more golden-brownish alternative:

As for the Poxwalker, I ended up being a bit more adventurous, in an attempt to bring him closer to the rest of my collection. So I added just a dash of metallic paint, some thinned-down Blood for the Blood God, and repainted some small areas where the Contrast Paints looked a bit too water-colour-y to me, such as the boils, the loincloth and the leather belt andΒ  pouches:




This guy could actually join the rest of my Nurglite models without a hitch — if anything, he only looks a bit more vibrant and infectious than my other models. Here’s a comparison picture with my “classic” Poxwalker scheme:



So yeah, this was a lot of fun! I really enjoyed the freeform, exploratory spirit of the whole session!

One thing that cannot be stressed enough – and this is relevant for my future treatment of Contrast Paints as a possible tool – is that the usefulness of the new paints really hinges on the colour of the undercoat: These really work best (or at all) when used over a very light undercoat. So if, like me, you favour black, grey or brown, you’ll find it harder to include them into your standard recipes. At the same time, it cannot be overstated how novel and original playing around with them feels, so they may just warrant a slight reshuffling of recipes and approaches. While I don’t think I’ll be abandoning “classic” paints (or dark undercoats, for that matter), the Contrast Paints are a ton of fun to play around with, and certainly a very promising new tool for painters. There are also armies that I think will be a blast to paint with these (I am looking at you, Tyranids, Eldar and Poxwalker hordes).

Two final observations before I wrap this up:

One, when seen at gaming distance, models that have been painted with nothing but Contrast Paints look completely painted — and pretty well painted, at that. If you look at them up close, especially when it’s an entire squad, Blood Bowl team or what have you, the paintjob still looks good, but maybe a bit basic. So an extra bit of highlighting here and there is where the models really go from good to great — you should keep this in mind!

Two, and this seems a slighly weird observation: If I didn’t know any better, I would say the new paints where designed to photograph well. Case in point, the picture towards the start of this post, after I had finished applying the Contrast Paints (but nothing else) actually make the models look just a wee bit cooler than they actually looked in real life at that point. Which, again, goes to show that you should probably still plan for an extra round of highlights and final tweaks.

 

Anyway, that’s all I can offer for now. I can safely say that this experience has been a blast, and that it’ll be very interesting to test the new paints further. And maybe, just maybe, you’ll find it helpful to get some firsthand observations from somebody who definitely isn’t a Golden Demon painter πŸ˜‰ In any case, I would, of course, love to hear your thoughts — or learn what you think of the new paints!

As always, thanks for looking and stay tuned for more!

For the love of Grot!

Posted in Blood Bowl, Conversions, Orcs & Goblins, paintjob, WIP with tags , , , , , , , , , , , , , , , , , , , , , , , on June 18, 2019 by krautscientist

My previous post showcasing my finished Ork Blood Bowl team must have been my least successful post this year, both in terms of views and comments, unfortunately enough. So, in a move that probably borders on being suicidal, I am following it up this week with yet more Blood Bowl content. Oh well, what can you do…

Anyway, painting that little snotling with the hammer recently – this little fellow here -…


…must have lit a bit of a fire under me, because I really felt the need to add some more, slightly humorous, grots to my collection. And sometimes you just have to go with what feels right in this hobby of ours, right?

Fortuntately enough, I didn’t have to dig deep into my cupboard of shame, because there was this little guy here, set aside as a part of my Blood Bowl project years ago:

I loved the idea of having a massively overburdened little greenskin lugging around the team’s extra equipment/trophies/snacks, and the model perfectly fit the bill! It’s basically a stock model, one of the “bonus gnoblars” that came with most of the Ogre Kingdoms kits. It was already quite characterful enough and didn’t really require any conversion. Even so, I grafted an ornamental wing to the head sticking out from the backpack, making it look like the remains of an unlucky player from an opposing team…

When it came to painting the model, it was mostly a question of blocking in some base colours, then adding a heavy wash of Army Painter Dark Tone and watch it do most of the work for me:

Not bad, eh? And a few more tweaks and touchups later, I had a mostly finished model:

At this point, it was mostly a matter of adding some subtle “special effects”, so I added some Tamiya Clear Red to the severed (?!) human head, and yet more Tamiya Clear Red, albeit thinned down, to the big chunk of meat on the model’s left shoulder, making it look suitably juicy and …erm “tasty” πŸ˜‰

All that was left was to quickly finish the model’s base. And afterwards, the Orkheim Ultraz’ “Kit-Git” was finished:




In terms of gameplay, this little guy could be a model for an assistant trainer (haha, yeah right! πŸ˜‰ ). More than anything, however, it’s a characterful little piece with just the right amount of humour, and hence an ideal addition to the Ultraz! πŸ™‚ Also, seeing how I’ve had this guy in my bitzbox for ages, I would say he also qualifies as a neglected model for Azazel’s June challenge.

But wait, there’s more! For instance, I still want to address this mystery model I shared with you a while ago:

Now what is this supposed to be, I hear you asking, some kind of sneaky special weapon?

One thing I immediately noticed when playing the Blood Bowl II video game were the little goblin cameramen appearing in every other scene (and during the actual games):

I thought these were such a wonderful little touch, and – avid kitbasher that I am – I couldn’t stop wondering how difficult it would be to come up with a little “camgrot” of my own.

Before I actually started converting, I tried to get a couple of proper screenshots of the camgrots from the game (which turned out to be rather tricky, seeing how they are only ever in the frame for a couple of seconds, or so small that you cannot get a good enough look at them), but I ended up capturing a few pictures of the sneaky gitz…

Blood Bowl 2_20190504160150

including a closer look at the actual camera setup:

Blood Bowl 2_20190504161300

My own model was then painstakingly grafted together from all kinds of odds and ends, mostly bitz from the Ogre Kingdoms catalgoue, really, that came from a rathe big job lot of ogre bitz I bought a couple of years ago. Those gnoblars are just incredibly useful conversion fodder!

Anyway, here’s the conversion I came up with:




There was no actual necessity to make the camera look mechanically sound, but I did want to add just a dash of plausibility, so I added a little crank on the side there, to hint at some kind of inner workings — in all honesty, though, the cameras from Terry Pratchett’s Discworld series (with little gremlins inside actually painting the pictures *really* fast) was foremost on my mind when building this model πŸ˜‰

The candle was added as a last little touch, either to suggest the “red light” on modern TV cameras, or to simply make the whole thing look even more like a weird magitek contraption.

The camgrot itself is not even the end of the project, however, because I had another idea idea: A couple of years ago, I picked up this goblin hut (that used to be part of the “Battle for Skull Pass” WFB boxed set) as part of a bigger bitz drop:

And, thinking of the camgrot, I asked myself whether this could be used as a cool “camera tower” for him, the better to capture the best possible footage. So I made him a little platform from a couple of odds and ends:


I definitely want to keep the platform optional, though, so I can still swap in that huge half-moon and use the hut in, say, HeroQuest or similar games. But it’s a nice way of making the most of that pretty characterful little piece of terrain:

For now, I wanted to start by painting the actual camgrot, though:

The undercoat did a wonderful job of pulling all of the different parts together into a coherent whole:

One effect I want to point out is the camera lens: I covered it with several coats of Tamiya Clear Water effect, which I think makes for a somewhat deeper and “glassier” look han mere gloss varnish would — but maybe that’s just what I would like to imagine…


And here’s the finished model (without a finished base, seeing how the little guy is going to end up on that camera platform of his):








And because there’s always time for a little fun, I even added a little Cabal Vision logo to the back of the little guy’s shirt:

All in all, these two models were a really cool way to explore the Blood Bowl universe beyond the borders of the actual pitch! Here’s a picture showing both of the finished models:

And while I was having a roll anyway, I also worked on a couple of “fanz” for the Orkheim Ultraz: These will be used as cheerleaders for the team:

The two guys on the left were built ages ago, and they are basically just the repurposed standard bearer and musician from an old mob of Orc boyz. They seemed like a great match, though — I merely turned the standard by 90 degrees, turning it into a flag. The guy (or rather, guys) on the right I am pretty proud of, however, because that was quite a finnicky conversion:


I loved the idea of carrying a spectator carrying another model piggyback, and while this is obviously an Orc carrying a Goblin, I did very much want to invoke the impression of a dad taking their kid along to a game — just look how happy that little guy seems! Dad, on the other hand, already has a bottle of fungus beer prepped and ready πŸ˜‰

So yeah, that’s it for today: Just a couple of weird greenskin models. I surely hope this week’s update won’t perform quite as abysmally as the previous post… So it goes without saying that I would love to hear your thoughts on these models! Please feel free to drop me a line! πŸ™‚

As always, thanks for looking and stay tuned for more!

Orkheim Ultraz: Pitch-perfect

Posted in Blood Bowl, Conversions, Orcs & Goblins, paintjob with tags , , , , , , , , , , , , , , , , , , , on June 6, 2019 by krautscientist

It’s time for another showcase post this week, as I have managed to finish another long running project of mine: As some of you may remember, I recently completed the last two Black Orc blockers for my Orc Blood Bowl team, the Orkheim Ultraz.

With the last two player models completed, all that was left to do was to give the entire team one last round of fine tuning. And that’s exactly what I did earlier this week, during one of my customary joint painting sessions at my friend Annie’s place:

I spent most of the session cleaning up the paintwork on some of the models, adding a few details here and there – especially painting the eyes on all of the models – and, maybe most importantly of all, painting a player number on each model. This turned out to be a slightly finnicky job, seeing how most of the models hadn’t been assembled with this step in mind, but in the end, I was able to wedge the numbers in there somewhere, even if I had to get creative in some cases πŸ˜‰

So it is with great joy that I can finally show you the finished team in all of its “pitch-perfect” glory. Meet the finished Orkheim Ultraz, everyone:

The Orkheim Ultraz
“Ultra ‘ard! Ultra-violent! Go Ultraz!”

 

I am really happy with the way the finished team looks. It’s also pretty cool how most of this team was basically assembled from leftover models, bits and pieces from my cupboard of shame, and cheap second-hand pick ups. I am not usually an extremely thrifty hobbyist, but this project was very much a case of producing a lot of bang for the least possible amount of buck πŸ˜‰

So, let’s take a closer look at the various models, shall we? I think we’ll just take it from the top:

 

Star Playa Gitgrim Sharptoof

The official line is that this guy was intended as my version of the “official” star player Varag Ghoulchewer. To be perfectly honest with you, however, I mostly just wanted to build a Blood Bowl model using the highly dynamic feral Orc boss back when I started my team, so that’s what I did. I am still pretty happy with this guy, even though I would probably do some minor things differently if I were to build him today (I think I would be a bit more corageous with the arms).

Anyway, with his eyes painted in and a few tweaks here and there, he is still a very nice focal point for the team, from a visual perspective.


 

For the rest of the team, my plan was to build the models in such a way that each model’s position and gameplay role would be fairly obvious just by looking at them.

Throwers

Gugmar and Rikkit are the Orkheim Ultraz’ Throwers, proud to perform the team’s first move during kick-off — although they are usually happy enough to have seen the last of the ball for that turn…

When it came to actually making these look like throwers, I decided to use pretty light armour and suitably athletic poses. The sports glasses were a spur-of-the-moment idea when building the first thrower, and I was lucky enough to find another head with glasses for the second model.


I also didn’t want to just mimic Rikkit’s pose for the second thrower, so I came up with a model that was preparing to throw a squig — because there are days when you just have to haul an ill-tempered mass of teeth into a gaggle of players, simple as that.

I am still rather happy with the way the squig turned out, by the way:

I just love painting those little guys…

 

Black Orc Blockers

Certainly the ‘ardest hitters in the team, Morglum Bruis’Arm, Grimgork Bucket’Ead, Borzag Ironskull and Azhag Ironjaw (from left to right) are as massive as they are resistant to fun.

The first two Black Orcs I assembled were mainly built right out of the box, with the removal of the weapons the only major change to the stock models. I got a little more adventurous with the other two, both because I wanted to make sure they looked suitably different from their buddies, but I was also influenced by the rather impressive new plastic models that had been released by then.

Anyway, these are definitely one of my favourite parts of the team: They look like a massive wall of muscle, scuffed armour and ill temper, which is exactly the look I wanted for them. The scratches on the armour also make for a rather effective look, if I do say so myself.

Blitzers

Gabnaz, Gorgrim, Gulgrit & Urrzag (from left to right) are the Orkheim Ultraz’ Blitzers and always the first ones into the fray. What they lack in tactical acumen, they make up for in sheer enthusiasm!

The Blitzers were built fairly early into the project — in fact, Gorgrim up there was actually the very first test model for the entire team. This is why they mostly use standard Orc boy parts. At the same time, I used three visual cues to try and differentiate them from the Linemen: The aggressive, dynamic poses on at least two of them. The armoured gauntlets on all models, save for Urrzag. And the American football-esque shoulder armour (simply repurposed vanilla Space Marine pauldrons) on all of them. In hindsight, they may seem just a bit too conservative, especially when compared to the “official” new plastic models, but I am pretty happy with them, nevertheless.

 

Linemen


At the lower end of the team hierarchy, Bolg, Urrg, Hergh and Garg are the team’s Linemen, referred to not so much by actual names, but rather by the amusing noises they make when going down during the game (Young Bolg there seems like he could be Blitzer material, though…).

Blood Bowl provides a great opportunity to inject some humour into the models, and the Linemen were my attempt at doing just that: I loved the idea that Orc Linemen should look like they were fairly incompetent when it came to handling the ball, so I made most of the models look like they were doing their darnedest to catch the blasted thing πŸ˜‰

Even better was the fact that most of this was mostly achieved by exchanging some hands and carefully posing the models on their bases — it turned out the monopose archers and boyz from the sixth edition WFB starter set were just perfect material for this particular project.

Bolg was built a good while later and maybe just looks a bit too competent for a lineman? I still like the fairly iconic, Blood Bowl-like pose he has, though. And whenever I look at those guys, I just have to smile, so I think I can call this mission accomplished πŸ˜‰

Goblins


Don’t tell it to the boyz, but these sly little devils probably have more cunning than the rest of the team combined. Zatnig and Nogbli (on the left) are from the old neighbourhood and fit right in with the rest of the team. Snikrit and Skaskul come from one of the shifty underground tribes, and have yet to earn their own player numbers, as some of the boyz just won’t trust them…

…I knew right from the start that I wanted some goblins as part of my team, yet when I started out, I only had the old Night Goblin plastics to work with — which wasn’t really a huge problem, because I still like the looks of them a lot, and their poses worked pretty well for Blood Bowl. Even so, I was happy when I later managed to get my hands on some parts from the vanilla Goblin kit from the same era, as the models already look like they are wearing old-timey sports gear.

Apart from that, I tried a mix of models that look truly, almost comically, determined (Zatning and Skaskul) and two models that channel the rather mischievous nature of Goblins (Nogbli and Snikrit). I really like these guys, and it’s not even that noticeable that the four of them only share two facial sculpts between them πŸ˜‰

Big Guy

There aren’t many things, on or off the pitch, that Spleenrot has not yet confused with a ball. He is, after all, a troll…

This guy was a bit of a lucky discovery: While searching for suitable big guy models online, I found the old plastic troll from the 7th edition WFB starter set and thought he would be brilliant for the job — only the model was long OOP by that point. So it was a delightful surprise to discover him in a bag with second-hand models at my old FLGS — and for a song, no less.

The model may be a little small by modern standards, but I still think he’s the perfect big guy for the Ultraz. Converting and painting him was also a blast!

 

So much for the actual players — but wait, there’s more!

 

Da Medikal Krew

Doc Nipptakk & Medikal Assistant Whakkit

A gnarled veteran of the infirmary, Doc Nipptakk is an expert when it comes to getting players back on their feet. Whether his success is actually based on his famed injections of “Vitaminz” or players are simply afraid of the monstrous syringes he uses to administer them, and would rather stay healthy in the first place, the results speak for themselves. Whakkit is Nipptakk’s trusty assistant, and a practitioner of the fabled art of “‘Nasty-Easy-o-logy” — whenever he isn’t relaxing during a round of “Whack-a-Squig”, that is…

 

The Goblin medic is a wonderfully characterful Kromlech model and was given to me by my friend Annie. Painting this guy was a lot of fun, even if the many nooks and crannies of the sculpt lead to some swearing on my part πŸ˜‰

Whakkit, the little grot with the massive hammer, is a very recent completion, even if the model has been in my collection for years: It came from a mostly complete metal Doomdiver Catapult that I picked up as part of a larger job lot, and the model was so characterful that I simply had to rescue it from its somewhat drab older paintjob.

Before:

And here’s the freshly painted model again:



 

Da Ballz

These are actually my only concession to “modern” Blood Bowl models, although this was an easy exception to make: The balls were another gift, for one, plus there’s also the fact that Maxime Pastourel’s wonderful squig ball has to be one of my favourite models from the last couple of years! So including it in my collection was a bit of a no-brainer πŸ˜‰

 

Re-rolls, tokens and turn counter

The new Blood Bowl teams come with themed re-roll tokens and turn markers, so it was obvious to me that I had to come up with my own versions as well. Building these using all kinds of orcish bric-a-brac was a fun project, indeed!

 

Squig-themed dice/tokens

These, along with the next model, were another gift from Annie. I really love suigs, so those delightful two critters above were a much appreciated additon to my collection, even though they cannot really be used as dice. Oh, Annie basically painted about 70% of them, too, to give credit where credit is due!

Da Fan


Sourbelch is a huge fan of the Ultraz, even though many – if not all – of the game’s finer points escape him. But as long as he can wave his flag, get drunk on mushroom beer and watch some skulls getting caved in, he considers the game a great one.

This massive guy was a birthday present Annie converted and painted for me a couple of years ago. The troll isn’t a GW model, yet it perfectly fits the vintage GW look. The beer barrel and straw setup was the result of an idle conversation about maybe converting a fan model wearing a beer hat. And now Sourbelch is here, proudly waving his flag and waiting to be joined by some additional fanz — hopefully you won’t have to wait for too long, buddy! πŸ˜‰

 

So that’s it — my entire Blood Bowl collection, at least for now. This project has been running for quite a while, but now I have a finished team. Incidentally, since I have recently started to re-familiarise myself with the rules by way of the Blood Bowl II video game, here are the Orkheim Ultraz in their digital form:

And here they are, once again, on the tabletop:

Of course, as Doctor Manhattan tells us, nothing ever ends. And while I am happy to call the actual team finished at this point, I will just as happily keep adding models to this collection: I still have plans (and WIP models) for some more hangers-on (a “kit-git”, as it were, plus some more fanz), a display base for the team or some smaller or bigger pieces of terrain. Plus there’s also that mystery teaser model I shared with you in my previous post…

And who knows, maybe I will even actually get to play the game again? We shall see… πŸ˜‰

 

For now, I am very happy with the finished team, however. And I would of course love to hear any feedback you may have! So please leave a comment!

Before I tune out for today, thanks must go to my friend Annie for keeping me motivated during this project and for providing neat little additions to my collection every now and then — one of these days, I’ll know the rules well enough be able to steamroll over that gorgeous Dwarf team of yours, by way of thanks (Ha-Ha, fat chance…) πŸ˜‰

Oh, and lest I forget: The fact that these guys had been waiting for their finishing touches for years at this point probably qualifies the finished team for Azazel’s “Neglected Models June” challenge as well πŸ˜‰

As always, thanks for looking and stay tuned for more!