INQ28: Worker #9

Yet another INQ28-related project this week — but one that could easily do double duty for games of Necromunda as well: It’s killer robot time! 🙂

Back when the Kastelan Robots were first released, I bought them pretty much right away, because I was fascinated with the conversion potential inherent in the kit. The first Kastelan was immediately entered into the service of the ruinous powers and became a counts-as Contemptor for my World Eaters:

As for the second Kastelan, my plans were more vague. The original idea was to turn him into a part of my small Iron Warriors killteam, channelling some of the old Jes Goodwin sketches for the Colossus, the same pattern of robot originally used in Perturabo’s Iron Circle bodyguard (at least in the older fluff, before Forgeworld tweaked the different robot designs and designations a bit):

I felt that it would be reasonably easy to approximate the design from the sketch with a couple of bitz, so I quickly got to work on an early prototype, splicing in a new head and experimenting with a couple of different setups:

Unfortunately, things ground to a halt partway through the building process, and the model ended up half-finished. This is what the poor Kastelan looked like for the better part of two years.

And that could have been the end of the poor robot, until I started working on my Road Crew project and came to the realisation that some kind of massive killer robot would be a really cool addition to that particular gang of malcontents from the underhive!

So I took another long look at the build I had so far and tried to figure out which direction I wanted to take the model into. For one, I took many cues from Jeff Vader’s Actaeon Heavy Assault Servitor:

Model built and painted by Jeff Vader

It should go without saying that borrowing ideas from a hobbyist as supremely talented as Johan is never a bad idea 😉 But where his servitor looked deliberately put together and well kept (that’s the Inquisition’s deep pockets for you), I knew I wanted something more ragtag and improvised, as befits a machine from the underhive. I also wanted to keep the robot’s original function slightly ambiguous, so it wouldn’t be perfectly obvious when it had originally been constructed and what had been its original function. So it shouldn’t surprise you that the ABC/Hammerstein robot from both the Judge Dredd comics and film became another important inspiration for my conversion:

But even so, hammering out the exact look I wanted turned out to be complicated. Which is when WarbossKurgan’s beat-up Kastelans turned up and provided that last bit of inspiration I needed to finally finish the build some time last year:

As you can see, there’s a clear resemblance with Jeff Vader’s aforementioned servitor. I really wanted to add a strong sense of cobbled-together repairwork and later additions to the robot’s original form, though, so I added all kinds of rough armour plates. Asymmetry also became an important part of the conversion, with one of the robot’s arms spindly and skeletal, while the gun arm ended up looking rather massive (to the point that it could even have been taken from a different machine). I also added part of an old barrel as an improvised shoulder pad, in order to achieve that particular underhive je ne sais quoi 😉 Oh, and I happened to find the perfect head — from an old OOP World Eaters Dreadnought given to me by Augustus b’Raass last year. Not only did it fit perfectly, but it also had a suitably brutal, uncaring look for a massive robot (there’s also a bit of Maximilian there, wouldn’t you agree? 😉 ) Speaking of other robots from fiction that inspired this model, let’s not forget Fallout 3’s Liberty Prime and Road to Jove’s Ceathair, who were also on my mind while making the last tweaks on the model.

Anyway, the finished conversion sat on my desk for quite a while, but with my recent committment to finally making a dent in my huge backlog of unpainted INQ28 models, I took it along to one of my regular painting sessions with my friend Annie.

When it came to painting the model, I knew I wanted to go with the same strong yellow I had been using for the rest of the Road Crew so far. My original plan was to undercoat the model silver, then crudely dab on Yriel Yellow, to show how the members of the gang had repainted the robot to fit their livery. After giving the matter some thought, that solution didn’t seem quite practical enough, however, so I borrowed a can of Averland Sunset from Annie. In the end, this made the painting process much easier, so I was able get most of the base colours sorted out in one evening of painting:

Like I said before, I really wanted to add some abiguity to the robot’s appearance: Is he some kind of heavy duty servitor? Or an ancient warmachine? Or something different altogether? The yellow colour hints at a rather more industrial use, but then I also carefully chose some decals that could be seen as military symbols, capaign badges and stuff like that. There’s also the stenciled #9 on the left side of the robot’s torso that would end up hinting at its eventual name.

With all of the main colours and the first pass of washes in place, the next important part was to make the model look suitably dirty, grimy and run down, so I added several passes of sponge weathering, dirt and grime. This was a fun step, but it was also important to know when to stop. Here’s what the model looked like after the weathering steps:

For the crude, additional armour plates, I actually followed my original plan and undercoated them silver, then crudely repainted them yellow, to make it look as though the Road Crew’s members had tried to match the robot’s original paintwork. I also added a tiny drop of Tamiya Clear Red to the robot’s breastplate — I wonder if anyone can guess the reason for that?!

Anyway, time to show you the finished model:

=][=

Worker #9

I also designed a base for the model, of course. I tried to match the muddy, rusty underhive look I had chosen for the rest of the Road Crew.

This is such a small detail, but I am actually pretty happy with the faded symbol on the rusty tank I made by combining a couple of old Space Marine decals:

So here’s the entire Road Crew so far, complete with its newest member:

If I have one small regret about the model, it’s that I realised too late that Averland Sunset was a bit different in tone from the Yriel Yellow I had used on the rest of the Road Crew models. Ultimately, however, it’s something I can live with — using yellow spray paint made the experience of painting the big guy much more enjoyable, and the difference in colour could easily be explained away as the robot’s original colour simply being slightly different from the yellow used by the Road Crew.

Anyway, I am pretty happy with having finished another long neglected model! And probably the best surprise is that, what with GW recently having dropped a hint about something called an “Ambot”,…

…there might actually be a chance of a suitable ruleset to use Worker #9 on a gaming table one day 😉

Oh, by the way, just in case you were wondering why I decided to name the robot “Worker #9”, it was actually a shout out to a half-remembered character from Final Fantasy Tactics, another ancient robot with an ambiguous original function:

I only found out the robot’s actual name was Worker 8 when I tried to dig up a picture for this post. Oh well…

It’s still a weirdly appropriate choice of name, though, seeing how the Road Crew itself was named after a throwaway line from the – incredibly entertaining – game Psychonauts.

So yeah, it seems like, after a couple of years, I was finally able to finish both of those Kastelans:

Plus it’s also cool how much mileage I seem to be getting out of that old Forgeworld Dreadnought head 😉

Even though Worker #9 and Raud the Hunter are pretty different in concept and function, the head feels like a perfect match for both of them, wouldn’t you agree?

So that’s it for today’s update. It goes without saying that I would love to hear any feedback you might have! I realise that people seem to be growing more and more used lately to just clicking the Like button and moving on. And while I appreciate your Likes as well, they really aren’t all that motivating, to be honest. So if you enjoyed this post, please consider leaving a comment! 🙂

As always, thanks for looking and stay tuned for more!

ETL V: Ex-ter-min-ate!

Hey everyone, after last week’s rather unpleasant events, let us return to this blog’s main subject, as I show you the next finished model for Khorne’s Eternal Hunt.

Having spent most of last Thursday and Friday watching the news of Brexit hollow-eyed and with a constant sinking feeling in the pit of my stomach, I decided I might as well try to transform my sadness into something more productive and started working on my converted Kastelan:

Now this model was originally built shortly after the release of the Kastelan Robots, in an attempt to transform into one of them into a particularly Khornate battle engine — and I believe I have definitely succeeded in that regard. And after sitting on a shelf for quite some time, the model was now ready for some paint, in time for the ETL event over at The Bolter & Chainsword.

The model is basically as tall and wide as a Contemptor, as you can see in this picture:

So I included it in my ETL vow as a Counts-As-Contemptor — and indeed, that is also the role the model will likely be filling if it should ever see the tabletop.

But before that, I had to get the thing painted. I took off all of the chaotic armour plates for this, in order to give me access to the model’s body, and interestingly enough, this made the model look almost like a standard Kastelan for most of the painting process:

But fortunately, as the armour plates came back on one by one,…

…the model started looking increasingly chaotic again 😉

From a technical perspective, I decided to work over a coat of Leadbelcher spray paint, and as it turned out, not only did this make for a really good base for the red I added on later, but it also made sure that all the internal workings of the machine could simply be left metallic, which makes for a pretty convincing look. It would have been really difficult to get back into all those little nooks and crannies with a brush, so the silver undercoat turned out to be a very good call!

This strategy, combined with a motivation fueled by a particularly mixture of sadness and madness saw me complete the model in record time. Take a look at the finished Khornate Kastelan conversion:

Thanks to a bitz drop from fellow hobbyist Helega, I was able to add a cool wrist-mounted gun to the Kastelan’s right forearm, courtesy of one of Pertuarbo’s guns: I will admit that the thought of using it on the model felt frivolous for maybe half a minute, but it did solve two problems at once (adding some bulk to that hand and wrist and finding a way to feature an integrated weapon in spite of the hammer), so I decided to go for it.

As you can see, I also added some decals to the model, in order to underline its nature as a machine even more. In fact, I couldn’t help myself and had to add a really ancient decal from the early 90s’ plastic Khorne Berzerkers:

Let me tell you, that decal sheet still holds some of the best Khornate decal designs, even today!

And here’s a closeup of the model’s entirely humourless face:

All in all, I am really rather happy with the finished model. And not only does this mean one less unpainted model, but it also marks the completion of my first ETL vow:

Together with my Skulltaker conversion and Lord Dumah, the 4th assault company’s Apothecary, that’s a cool additional 500 points for Khorne’s Eternal Hunt!

But wait, there’s one last thing: I am still looking for a snappy name for this new combat automaton! And although I have already received quite a few cool suggestions on various forums, I would really love to hear your ideas as well!
I’ll be needing both the pattern designation for the machine as well as the name of this particular model, so I’d love to hear your suggestions! Please refrain from going Age of Sigmar levels of cheesy on me, though 😉

And of course it goes without saying that I would also love to hear any feedback you may have! As always, thanks for looking and stay tuned for more!