Archive for the road crew

INQ28: Worker #9

Posted in 40k, Conversions, Inq28, Inquisitor, paintjob with tags , , , , , , , , , , , , , , , , , , on April 23, 2018 by krautscientist

Yet another INQ28-related project this week — but one that could easily do double duty for games of Necromunda as well: It’s killer robot time! 🙂

Back when the Kastelan Robots were first released, I bought them pretty much right away, because I was fascinated with the conversion potential inherent in the kit. The first Kastelan was immediately entered into the service of the ruinous powers and became a counts-as Contemptor for my World Eaters:

As for the second Kastelan, my plans were more vague. The original idea was to turn him into a part of my small Iron Warriors killteam, channelling some of the old Jes Goodwin sketches for the Colossus, the same pattern of robot originally used in Perturabo’s Iron Circle bodyguard (at least in the older fluff, before Forgeworld tweaked the different robot designs and designations a bit):

I felt that it would be reasonably easy to approximate the design from the sketch with a couple of bitz, so I quickly got to work on an early prototype, splicing in a new head and experimenting with a couple of different setups:


Unfortunately, things ground to a halt partway through the building process, and the model ended up half-finished. This is what the poor Kastelan looked like for the better part of two years.

And that could have been the end of the poor robot, until I started working on my Road Crew project and came to the realisation that some kind of massive killer robot would be a really cool addition to that particular gang of malcontents from the underhive!

So I took another long look at the build I had so far and tried to figure out which direction I wanted to take the model into. For one, I took many cues from Jeff Vader’s Actaeon Heavy Assault Servitor:

Model built and painted by Jeff Vader

It should go without saying that borrowing ideas from a hobbyist as supremely talented as Johan is never a bad idea 😉 But where his servitor looked deliberately put together and well kept (that’s the Inquisition’s deep pockets for you), I knew I wanted something more ragtag and improvised, as befits a machine from the underhive. I also wanted to keep the robot’s original function slightly ambiguous, so it wouldn’t be perfectly obvious when it had originally been constructed and what had been its original function. So it shouldn’t surprise you that the ABC/Hammerstein robot from both the Judge Dredd comics and film became another important inspiration for my conversion:

But even so, hammering out the exact look I wanted turned out to be complicated. Which is when WarbossKurgan’s beat-up Kastelans turned up and provided that last bit of inspiration I needed to finally finish the build some time last year:



As you can see, there’s a clear resemblance with Jeff Vader’s aforementioned servitor. I really wanted to add a strong sense of cobbled-together repairwork and later additions to the robot’s original form, though, so I added all kinds of rough armour plates. Asymmetry also became an important part of the conversion, with one of the robot’s arms spindly and skeletal, while the gun arm ended up looking rather massive (to the point that it could even have been taken from a different machine). I also added part of an old barrel as an improvised shoulder pad, in order to achieve that particular underhive je ne sais quoi 😉 Oh, and I happened to find the perfect head — from an old OOP World Eaters Dreadnought given to me by Augustus b’Raass last year. Not only did it fit perfectly, but it also had a suitably brutal, uncaring look for a massive robot (there’s also a bit of Maximilian there, wouldn’t you agree? 😉 ) Speaking of other robots from fiction that inspired this model, let’s not forget Fallout 3’s Liberty Prime and Road to Jove’s Ceathair, who were also on my mind while making the last tweaks on the model.

Anyway, the finished conversion sat on my desk for quite a while, but with my recent committment to finally making a dent in my huge backlog of unpainted INQ28 models, I took it along to one of my regular painting sessions with my friend Annie.

When it came to painting the model, I knew I wanted to go with the same strong yellow I had been using for the rest of the Road Crew so far. My original plan was to undercoat the model silver, then crudely dab on Yriel Yellow, to show how the members of the gang had repainted the robot to fit their livery. After giving the matter some thought, that solution didn’t seem quite practical enough, however, so I borrowed a can of Averland Sunset from Annie. In the end, this made the painting process much easier, so I was able get most of the base colours sorted out in one evening of painting:




Like I said before, I really wanted to add some abiguity to the robot’s appearance: Is he some kind of heavy duty servitor? Or an ancient warmachine? Or something different altogether? The yellow colour hints at a rather more industrial use, but then I also carefully chose some decals that could be seen as military symbols, capaign badges and stuff like that. There’s also the stenciled #9 on the left side of the robot’s torso that would end up hinting at its eventual name.

With all of the main colours and the first pass of washes in place, the next important part was to make the model look suitably dirty, grimy and run down, so I added several passes of sponge weathering, dirt and grime. This was a fun step, but it was also important to know when to stop. Here’s what the model looked like after the weathering steps:




For the crude, additional armour plates, I actually followed my original plan and undercoated them silver, then crudely repainted them yellow, to make it look as though the Road Crew’s members had tried to match the robot’s original paintwork. I also added a tiny drop of Tamiya Clear Red to the robot’s breastplate — I wonder if anyone can guess the reason for that?!

Anyway, time to show you the finished model:

=][=

Worker #9


I also designed a base for the model, of course. I tried to match the muddy, rusty underhive look I had chosen for the rest of the Road Crew.

This is such a small detail, but I am actually pretty happy with the faded symbol on the rusty tank I made by combining a couple of old Space Marine decals:

So here’s the entire Road Crew so far, complete with its newest member:

If I have one small regret about the model, it’s that I realised too late that Averland Sunset was a bit different in tone from the Yriel Yellow I had used on the rest of the Road Crew models. Ultimately, however, it’s something I can live with — using yellow spray paint made the experience of painting the big guy much more enjoyable, and the difference in colour could easily be explained away as the robot’s original colour simply being slightly different from the yellow used by the Road Crew.

Anyway, I am pretty happy with having finished another long neglected model! And probably the best surprise is that, what with GW recently having dropped a hint about something called an “Ambot”,…

…there might actually be a chance of a suitable ruleset to use Worker #9 on a gaming table one day 😉

Oh, by the way, just in case you were wondering why I decided to name the robot “Worker #9”, it was actually a shout out to a half-remembered character from Final Fantasy Tactics, another ancient robot with an ambiguous original function:

I only found out the robot’s actual name was Worker 8 when I tried to dig up a picture for this post. Oh well…

It’s still a weirdly appropriate choice of name, though, seeing how the Road Crew itself was named after a throwaway line from the – incredibly entertaining – game Psychonauts.

So yeah, it seems like, after a couple of years, I was finally able to finish both of those Kastelans:

Plus it’s also cool how much mileage I seem to be getting out of that old Forgeworld Dreadnought head 😉

Even though Worker #9 and Raud the Hunter are pretty different in concept and function, the head feels like a perfect match for both of them, wouldn’t you agree?

So that’s it for today’s update. It goes without saying that I would love to hear any feedback you might have! I realise that people seem to be growing more and more used lately to just clicking the Like button and moving on. And while I appreciate your Likes as well, they really aren’t all that motivating, to be honest. So if you enjoyed this post, please consider leaving a comment! 🙂

As always, thanks for looking and stay tuned for more!

Advertisements

The State of the Hunt, Week 15/2018: Coming up for air

Posted in 30k, 40k, Conversions, Fluff, Inq28, Pointless ramblings, state of the hunt, WIP, World Eaters with tags , , , , , , , , , , , , , , , on April 9, 2018 by krautscientist

From a hobby perspective, it has been quite a few weeks for me — with two finished INQ28 retinues and a couple of models on top of that. However, as I’ve said earlier, things might get a bit more hectic in the immediate future, so I cannot be sure whether or not I’ll be able to keep up this rather frantic pace. So what better time to take a step back, take a deep breath, and take a look at the things I have achieved so far? This also has the added benefit of providing me with the perfect chance to also share some current news with you. So here goes:

I. Head count

I’ve really had a blast this last couple of weeks, working through one neglected model after another and finally finishing some long running projects! One of my hobby resolutions for 2018 was to try and put some serious work into the INQ28 part of my collection, especially when it comes to finally adding paint to all those conversions that have accumulated in my cupboard of shame, and I do think I have rather managed to make good on that promise.

So here’s a round-up of the models I have painted so far this year:

That’s fifteen models less in the unpainted pile. Not a particularly impressive number in and of itself, certainly, and even less so when compared with the impressive output of, say, people like Azazel. But it still feels like quite an achievemen, nevertheless. Two more inquisitorial retinues – Inquisitor Arslan’s and Inquisitor Gotthardt’s – have been finished. I’ve painted a second 30k World Eaters Contemptor that I am still really happy with. My very first Primaris Marine has been painted. And I have finally managed to paint a RT era Imperial Guard trooper that had made its way all across the globe to reach me. Plus I have already been able to eclipse my 2017 painting output (twelve models), and we still have quite a bit of 2018 ahead of us, haven’t we? 😉

So yeah, I am pretty pleased with myself, to be honest. And still motivated to keep going, which is probably even more important. Oh, and for those of you with sharp eyes: Don’t worry, we’ll be talking about the big yellow gentleman in the back row in more detail before long… 😉

II. New supply lines

Long time readers may remember how dejected I was when my favourite FLGS had to close its doors back in 2016 (still a little sore *sniff*).For quite a while, the only way to replenish my hobby supplies – online purchases notwithstanding – was to carefully plan work-related trips to larger cities around the option to visit local GW or independent stores.

Great news, then, that I now find myself with access to new supply lines:

For one, I discovered a new local independent store (called “Chaosgames”) a while ago that not only has great service and provides easy access to Army Painter washes (a godsend!), but also happens to include occasional happy finds like this guy here:


Expect him to join my 30k World Eaters before long… 😉

What’s more, in an entirely unexpected move, a new GW store recently opened its doors in the neighboring city. I wasn’t even aware of that until my good friend Annie told me — what an awesome surprise!

My first scouting mission to the new store already took place a fortnight ago and included some friendly banter with the local store manager. I also discovered his absolutely fantastic Imperial Guard army in one of the display cases and took some photos right away:


The whole army has a “mining world” theme, with lots and lots of cool kitbashes and conversions that make every individual in the force look like the member of a grimdark mining corporation. A fantastic concept, and beautifully executed!

In another pleasant surprise, my own models, in turn, made it straight to the store’s Facebook page:

Now I’ll still be visiting local stores whenever I am on the road, of course — for instance, I make it a point to try and visit the fantastic “Fantasy-In” whenever I am in Hanover. But having access to some hobby-related stores in the immediate vincinity is such a relief — brilliant! 🙂

III. Meanwhile, across the tabletop:

While I keep referring to the frequent painting sessions with my friend Annie (that have become a key point in my painting process, it must be said!), I realise I haven’t really shared many of Annie’s projects with you — which is quite a shame, as she routinely manages to come up with some truly stunning stuff. Case in point, the “Flying Dwarfsmen”, her brand new dwarven team for Blood Bowl, planned, built and painted in an impressively short amount of time (and, as it happens, just in time for the recent “Dungeonbowl”):

Where GW’s stock dwarven team seems a bit too cartoony for its own good, Annie’s team actually uses the brilliant Kharadron Overlords models as alternative Blood Bowl players: The entire team has been carefully built around the Kharadron’s distinct steampunk look and feel, from the players to the incredible, scratchbuilt/kitbashed Deathroller (or the turn counters, or the bases, or…). Anyway, you can expect a much more detailed feature dealing with these guys as soon as I can get a closer look (and get the chance to take some quality photos of them)!

IV. To Arms!


I am pretty sure I am not the first person to tell you this, but the ever inspirational Dave Taylor is currently running a Kickstarter campaign for a book project called “Armies & Legions & Hordes”, focused on painting the kind of high class army projects Dave has become well known for. In addition to talking techniques, the book will also be featuring expansive looks at some of Dave’s own, seminal army projects, and with his AdMech army, his Blood Pact and his Genswick Rifles all up for a feature, the book’s already basically a no-brainer for me.

The Kickstarter has already attained its mark many times over, but there are still a couple of days on the clock, so you can (and probably should) check out the Kickstarter and chip in here.

 

So yeah, so much for this week’s mixed views — and for the brief amount of respite: While I am writing this, I am already hard at work on two more Ordo Scriptorum characters, and there’s also Azazel’s current community challenge – “Assembly April” – with building, converting and kitbashing as its subject — I am pretty sure I won’t be able to resist that one…

So while things may have to slow down for a bit, I think you can expect another update very soon. Until then, please let me hear any feedback you might have! And, as always, thanks for looking and stay tuned for more! 🙂

The 2017 Eternal Hunt Awards, pt. 1: A look back at my hobby year

Posted in 30k, 40k, Chaos, Conversions, Inq28, Inquisitor, Pointless ramblings, Traitor Guard, World Eaters with tags , , , , , , , , , , , , , , , , , , , , on December 24, 2017 by krautscientist

Awards

Once again, welcome everyone to the 2017 Eternal Hunts Awards, my blog’s annual feature to analyse the past year’s great – and not so great – hobby moments, pick my favourite (and least favourite) models from GW’s slew of releases and single out some of the most spectacular hobby work I’ve seen online. So let’s snap to it, shall we? 😉

For today’s installment, let’s start once again with a recap of my hobby year and my personal projects. While the numbers really aren’t all that spectacular this year, I still hope I have a few cool things to reminisce about — so let’s take a look:

 

I. My hobby projects

I think it’s no hyperbole to say that 2017 was yet another firestorm of a year, especially with regard to politics and RL events. It has also been a pretty busy and draining year for me personally — and my hobby output clearly reflects this: I started strong, back in January, but the stream of finished new models then diminished into a trickle over the year. So at year’s end, here I stand with but twelve painted models to my name (with another one currently on the painting desk):

Doesn’t really sound all that impressive now, does it? The bright side is that I am actually really happy with every single model that I have managed to paint this year, and that has to count for something, right? 😉 I would also argue that some of the models were really rather intricate challenges and, in one case, a definite step outside my comfort zone. So let’s take a closer look at some of the more remarkable completions.

 

1. Khorne’s Eternal Hunt


This probably won’t surprise you, but my longest running army project, the World Eaters’ 4th assault company, once again made for the lion’s share of my hobby output — albeit in a slightly different way from before. This year, I decided to focus on exploring the Horus Heresy era incarnation of Lorimar and his merry band of butchers, and tried to actually get some of the models I had build last year painted, while also adding a new conversion here and there. And this small collection of models is finally starting to look pretty appealing, if you ask me:

One project in particular stands out with regard to my 30k World Eaters: As some of you will probably still remember, two of my favourite achievements from last year were two versions of Angron I managed to build and paint: One representing the XII Primarch during his days as a gladiator, the other an interpretation of his latter years (and millennia) as a Daemon Primarch.

Even with those two versions of the Primarch finished, however, there was still the official Forgeworld model that Adam Wier (of Between the Bolter And Me ), sent to me, incredibly enough:

Forgeworld Angron WIP (1)

Now I do of course realise that painting Forgeworld Primarch models probably isn’t all that special any more — but it definitely was for me, seeing as I had never worked with an official Primarch model before. Plus this was pretty much my favourite Primarch as well as an incredible gift from Adam — so I really wanted to do Angron justice. And I do believe I’ve managed to pull it off:


What’s more, I created yet another version of Angron, based around an iconic illustration by Wayne England and built from the freebie Slaughterpriest that came with the first copy of the relaunched White Dwarf:


Trying to create a model to fit the classic piece of artwork was a really cool challenge and provided yet another chance to explore the Primarch’s troubled – and bloody – background. You can read up on what went into the model’s creation here, in case you are interested.

This leaves me with three different incarnations of Angron during his mortal life, and I do think there’s a nice sense of character progression throughout this mini-collection:


In addition to the Primarch, I also applied myself to the creation of a model representing his equerry, Eighth Captain Khârn. The official Forgeworld version of the character didn’t quite click with me, for a number of reasons, so I endeavoured to make my own version:


Beyond Primarchs and equerries, however, I didn’t forget the rank and file: One model I am still particularly happy with is Ancient Vaako, my very first Contemptor — and actually the first model I painted in 2017:


What pleases me most about Vaako is that the model is a conversion of the somewhat awkward plastic Contemptor from the Betrayal at Calth boxed set — a conversion that I would still consider a pretty big success. So much so, in fact, that my second Contemptor uses the exact same base model 😉

Come to think of it, I actually did paint one model for the 40k version of Khorne’s Eternal Hunt: My very red version of Be’lakor:


The model was another excellent gift, this time courtesy of my good friend Annie. I really consider Be’lakor a model for the ages, so I am really happy to have him in my collection — painting him was a blast, too! Thanks again to Annie, for another brilliant contribution to my collection!

2. The world of INQ28

I have to admit that I once again gave short shrift to the INQ28 angle of the hobby this year — although not for lack of trying. I did manage to work on one of my more freeform projects, however, painting two more models for my downhive band of malcontents, the Road Crew — they are growing into a rather eclectic little group, if I do say so myself:

These guys really are such a fun diversion, so expect to see more of them in 2018 — especially since they seem to tie perfectly into many Necromunda-related shenanigans 😉

 

 

 II. My favourite hobby moments

Of course it wasn’t all about painting models, and 2017, in particular, was marked by some particularly awesome moments:

Probably the absolute high point, bar none, was my visit to Amsterdam in the summer, where I got to spent a fantastic weekend with fellow hobbyist – and great guy – Augustus b’Raass:

We talked shop, tasted a broad selection of tasty local beers, put some of our respective models against each other for a pretty cool photoshoot and spent some time polishing each other’s bald heads to a mirror sheen — actually, just one of the above items was made up by me 😉



Oh, and let’s not forget mentioning that I got so see Auggie’s brilliant version of ADB’s First Claw from up close:

First Claw by Augustus b’Raass (1)

Now going to the Netherlands isn’t exactly a monumental trip for a German, but it was still a big deal for me, mostly because I previously only really “knew” Augustus from our exchanges via The Bolter & Chainsword, plus I am also a bit of a scaredy cat, really. I really had a blast during the weekend, though, and Augustus was such a gracious host, as well as an excellent conversationalist — I actually couldn’t be any happier to have taken the plunge! Many thanks once again to Augustus for this excellent trip – definitely one of the best moments of 2017 for me – and I sincerely hope we’ll be hearing from each again sooner rather than later, buddy! 🙂

You can read up on the trip – and take a look at many more nifty photos – over here.

My second-favourite hobby moment of 2017 actually ties right back to my visit to Amsterdam: While visiting the GW store there, I met Rowdy/BubblesMcBub, who not only made my day by basically me treating like a rock star, but was also incredibly generous enough to let me have almost the entire Death Guard half of the Dark Imperium boxed set, which really blew me away! Now it actually took me until Christmas to actually start and repay Bubbles for his kindness, but a first supply drop is hopefully making its way to the Netherlands as I am writing this (also see my previous post on the matter). Anyway, thanks again for your generosity, mate!

There were even more cool moments, though: I loved it when I discovered that Dariiy had created an illustration based on my conversion of Daemon Primarch Angron for a friend of hers:

Angron illustration by Dariiy

I couldn’t even tell you what makes me happier: Looking at that illustration or knowing that somebody actually has that up on their wall somewhere, and that my model played a part in that 😉

I would also be remiss not to mention my continued correspondence – and exchange of hobby ideas, with DexterKong, something that has become instrumental in building the world that informs practically all of my INQ28 models. The same also goes for all the other hobbyists I am in semi-regular contact with – PDH, Neil101, Inquisitor Mikhailovich,… — the only problem is that I regularly take forever to answer to each and every e-mail…

Oh, and one final high point for this year arrived just in time for Christmas, with Eternal Hunt finally achieving one million views! Yay!

III. Blogging

In fact, this neatly leads into talking about the state of this blog – and the state of my blogging – for a bit: In addition to finally ammassing the magical million views, Eternal Hunt also turned five this year, which was pretty awesome:


Looking back made me realise that this blog not only serves as a motivating factor to actually get things done, but it has also grown into a platform for getting in contact with other hobbyists from around the world and form a social network, if you will, that not only provides me with fantastic input and feedback, but has also led to my collection being enriched by fantastic pieces of work from fellow hobbyists, which is really a rather humbling experience, when you think about it:

And, according to a fun discovery while browsing my WordPress statistics, I also seem to have some readers in pretty high places…


Seriously, though: I would really love to know whether those hits were accidental or there’s really a 40k fan in the Vatican…

At the same time, and in spite of all the positive news, I am also painfully aware that 2017 has been my least active blogging year so far, with only 25 posts versus the previous year’s 44. The reasons for that are mostly personal, and RL-based, but the fact remains that the blog has been far less busy this year and, probably as a consequence, has been losing views and readers. Now I know that one really shouldn’t look at the numbers so much, but the numbers for this year actually going down for the first time in this blog’s life is still ever so slightly depressing — in fact, it feels as though it gets harder and harder to get people to actually engage with content, even in the case of more sizeable, rather well thought-out posts, which is probably also a consequence of so many hobbyists rather gravitating towards social media like Facebook or Instagram for their chance to look at pretty pictures.

Personally speaking, I find this prospect hardly encouraging, as those platforms don’t really seem to encourage actual conversations, more often than not. So if I can make one small wish for Christmas, it’s that people not only continue to frequent this blog and comment on its content – although that would be really awesome – but also to not forget the blogosphere and the classic forums. They may not be the modern, new-fangled way of doing things, but I have to admit that I find myself feeling critical of big social networks more and more, for reasons well beyond this shared hobby of ours.

IV. Plans

Whatever happens next year, I am pretty confident that cutting up and painting little plastic men – and writing about it – will be a part of it. So with the knowledge that I am easy to distract and horribly lazy, what’s in store for 2018?

The Horus Heresy era World Eaters will be one of the most important projects in 2018, without a doubt: There are already lots of pretty nifty conversions I want to see painted! If I had to pick out one thing from this project that I really want to paint next year,…it actually wouldn’t be a World Eater, but a Word Bearer:


Both DexterKong and InquisitorMikhailovich dared me to build a model for Argel Tal, leader of the Gal’Vorbak, and after some initial misgivings, I actually built two models — one for his “mortal” version, and one for when he puts on his game face. Painting both while trying to create a sense of continuity between them should be challenging but fun — the models will also make for a pretty cool companion piece for my Khârn conversion. So expect to see these guys finished some time next year!

Thanks to BubblesMcBub, I also have the beginnings of a small 40k Death Guard army project in my possession, and I am pretty happy with the test models I have painted so far:


So there’s going to be some Death Guard in my future as well. Incidentally, I only just finished a Death Guard conversion that I am rather happy with:

Remember Maxime Pastourel’s excellent Lord of Contagion model from the Dark Imperium boxed set? I truly love that model! I treated myself to two of those, via bitz swap: One to leave completely unaltered, the other one I wanted to convert. My initial idea was that making the model into a representation of Typhus would be a nifty idea.

But then the massive Death Guard release dropped and gave us not only a new model for Typhus, but two different sets of DG terminators — which pretty much seemed to defeat the exercise of converting the Lord of Contagion. Moreover, the conversion just didn’t come together, with the model seemingly fighting me every step of the day. So back into the box it went.

But I came across those bitz earlier this week, and gave it another go. And I think I may finally be on to something. Take a look:



Beyond standard 40k, I also really want to focus on the INQ28 and specialist angle next year. And alas, one thing I never really got around to in 2017 was to get some paint on Redactor Orlanth and his operatives:

Inquisitor Orlanth and Parchment Scrotener WIP
Which is really a shame, because that retinue contains some of my best INQ28 conversions, if you ask me…oh well, I’ll just have to postpone this project to 2018 😉

Alongside more work on the Road Crew, of course: I already told you that those guys would be getting some more attention next year, and the next applicants for the merry little group are already lined up:


Of course there’s also the fact that the Road Crew perfectly fits into the new Necromunda, and I am also rather looking forward to taking those new gang sprues for a spin, so yeah…

For the immediate future, however, I would mainly love to make some time for painting over the holidays, so wish me luck with that! 🙂

 

If all goes according to plan, the next installment of the 2017 Eternal Hunt Awards should arrive before the new year, with the third and final episode following some time in (hopefully early) January: After all, we still have to take a look at both GW’s 2017 releases and the best work from fellow hobbyists around the world, right?

But for now, let me wish you all a very Merry Christmas and say thank you from the bottom of my heart to everyone who sent me bitz, models, e-mails, ideas, read this blog or commented! You guys are what keeps the Eternal Hunt going! Please keep it up! 😉

As for readers and commenters, it goes without saying that I would love to hear any comments or feedback you might have about my 2017 output, so feel free to sneak in a quick line before mass or after opening your Christmas presents 😉

And finally, as always, thanks for looking and stay tuned for more!

The State of the Hunt, Week 35/2017: Do the robot!

Posted in 30k, 40k, Chaos, Conversions, Inq28, Inquisitor, state of the hunt, WIP, World Eaters with tags , , , , , , , , , , , , , , , on August 31, 2017 by krautscientist

I know I should really be painting some stuff for a change, but relatively little hobby time I have at the moment somehow invariably ends up going towards indulging flights of fancy — hey, at the very least, you get to look at some new kitbashes, alright? 😉

Ever since I built my first Dreadnought, back in 2010 or thereabouts, I have always loved the slightly bigger scale and particular clunkiness afforded by this particular unit type, so I find myself going back to building Dreadnoughts and killer robots on a fairly regular scale — go figure! Today, I have no less than three walking deathmobile projects to share with you, so strap yourselves in:

I. The Blight That Walks…

First up is yet another addition to my alarmingly growing (or should that be mushrooming…?!) Death Guard project. In all fairness, though: It was always clear that a Dreadnought would have to enter the equation at some point, wasn’t it? 😉

The thriftiest option seemed to be to go for the Dark Vengeance Helbrute as a base model — well, that and I really like that particular model: Painting my original DV Helbrute for my World Eaters was great fun, in spite of its mutated look not gelling all that well with the overall look and feel of my army. But that same fleshy hideousness of course perfectly matches the general Death Guard vibe, if you ask me 😉

So here’s what I have so far:




I erm…borrowed a couple of ideas from the recent work of fellow hobbyists, like GuitaRasmus and Marius Perdo, among others, yet I also tried to put my own spin on things. It’s still a fairly economical conversion, however, because I think the Dark Vengeance Helbrute doesn’t really need too much work to read as a Nurglite model.

Now the belly obviously needs some cleanup and smoothing over, but the general look is there. Incidentally, the above pictures are in greyscale because I actually used a mix of GS and Milliput that ended up making for a vile, pistachio-ice cream colour Oh, I also my tried and true tin-foil trick again, putting a piece of the stuff between the plastic and GS while sculpting, so both parts are easy enough to separate when everything has dried, while still remaining form fitting. So the belly remains a separate piece, which should be super handy for assembly reasons:


Still a bit of detail work left to do as well, although I suspect I’ll be playing it fairly safe with this guy. Going all out on the pantjob should be fun, though 😉

II. Underhive Heavy Metal

Back when the first plastic AdMech kits were released, the Kastelan Robots were one of my first purchases. One of them was turned into a counts-as Contemptor for my 40k World Eaters:


The other one was was saved for future use, although my idea of what to do with the model actually went through several revisions: The original plan was to turn him into a Colossus-pattern robot for my small Iron Warriors project, but that plan never really quite got off the ground, and it finally went under for good when Forgeworld ended up producing actual models to represent the Iron Circle.

Later I realised it would be cool to turn the model into some kind of patched up, ancient servitor/former war machine as another colourful addition to my Pit Slave/Underhive project, The Road Crew:

But while I really liked that idea, it never really materialised either, apart from some early kitbashing. But then two things happened. One, I got my hands on one of the old Forgeworld World Eaters Dreadnoughts, courtesy of my buddy Augustus b’Raass, and the head of the machine just turned out to be perfect for this project. Two, I saw what fellow hobbyist WarbossKurgan did with his rather beat-up Kastelans, and that provided the inspiration I needed to wade back into the fray. So here’s what I have now:



As you can see, I have gone for a really ragtag appearance so far, with many tacked on armour plates and strange bits and bobs that suggest all kinds of field repairs — only fitting for the underhive, really. The rounded, 50s retro-futuristic SciFi look is still there, but it’s covered by layers and layers of later additions or replacements: In fact, I really love the idea of making the machine’s origins even more ambiguous: Is it a refurbished heavy duty servitor? An AdMech construct or an ancient warmachine? Or could it be even older…?

There were also several pieces of inspiration for the model: There’s quite a bit of Mad Max and Fallout going on there, but probably the biggest influence was the ABC Warrior Robot, possibly the best thing about the old Judge Dredd film:


And while we are on the subject of influences, using part of a barrel as one of the model’s shoulder pads is actually a bit of a shout out to The Road to Jove, Aaron Dembski-Bowden’s and David Sondered’s graphic novel project:

This also ties into something else I was actually pushing for: A general look of asymmetry: the pauldrons are one example of this, but there are also the arms: The gun arm is massive and beefy, the other one is strangely skeletal, probably due to having been replaced or repaired at some point.

Anyway, after getting nowhere with this model for ages, I am actually pretty happy with the progress I have made. The next step will be to add more details, like cabling and a bit more battle damage. And then, painting the model should be rather enjoyable. I think I’ll be going for a mix of darkened, oily metal and the Road Crew’s trademark, heavily weathered yellow armour I also want to pick a collection of decals that may or may not hint at the machine’s past — in any case, it should make the model even more interesting! And it’ll make for a cool addition to the project:

III. Immortal Hunter

And finally, yet another model: This one was actually built earlier than the other two, but I don’t think I’ve shared it with you yet.

One of my favourite 30k models I have done so far is my plastic World Eaters Contemptor, Vaako the Immortal:


Now when I visited Augustus b’Raass in Amsterdam, he was awesome enough to magnetise Vaako’s weapon options for me. But that left me with two useable weapon arms, and when I recently managed to get a pretty good deal on the plastic Contemptor body, I thought about putting those weapons to good use — and then I just love cutting up that terrible, clunky monopose kit. I’m just weird like that. 😉

I also wanted to find out whether the aforementioned head from the OOP Forgeworld World Eaters Dread  would work on a Contemptor. So I made another 30k Contemptor for my World Eaters. Again, this guy is still missing some detail, but I am already pretty happy with the general setup.




The left arm is a smaller version of the Ursus Claw harpoons the World Eaters would mount onto their void ships and the Titans of the Legio Audax:


It was originally built quite a while ago (drawing some inspiration from a similar conversion by fellow hobbyist sheep) as an additional CC option for my 40k Dreadnoughts/Helbrutes, but it arguably works even better on the taller Contemptor. Together with the multimelta, it suggests that this Contemptor’s specialty is actually hunting for heavier prey, such as enemy warmachines or Dreadnoughts…

Here’s the recipe for the Ursus Claw arm, in case anyone’s interested: The basic arm is the CC arm from the Blood Angels Librarian Dreadnought, I mostly merely replaced the actual weapon
Now the harpoon itself was made from an old axle bit from an ancient model truck kit — although it would be really easy to find a suitable replacement for that bit
the spike is an element that appears on many of GW’s terrain kits and was cut off from a small wall section
the light grey part right underneath the tip was a piece of a Chaos vehicle bulldozer bit shaved down to make a connection bit between the tip and the haft of the weapon
the barrel for the chain consists of two Chaos Marauder Horsemen shields, a roll of chain from an Ogre Kingdoms kit and a piece of chain, once again from an Ogre Kingdoms kit, I believe — sorry for not being more precise, but I got those bitz from an Ogre Kingdoms joblot I bought via ebay.

So yeah, that makes three massive killer-robot-cyborg dudes. What can I say — building those things is just so much fun 😉

Of course I would love to hear any feedback you might have! And, as always, thanks for looking and stay tuned for more!

The State of the Hunt, Week 22/2017: Too hot for painting…

Posted in 30k, 40k, Chaos, Conversions, Inq28, Inquisitor, state of the hunt, WIP, World Eaters with tags , , , , , , , , , , , , , , , , , , , , , on June 1, 2017 by krautscientist

Hey everyone, as the title should already have told you, the last few days have been crazy hot over here, on the blasted plains of northwestern Jhermani, so getting anything painted was completely out of the question. Actually, so was just about anything else, really. But I did at least make some time for a spot of kitbashing, and have some results to share with you:

 

I. In the Shadow of Great Wings, pt. 1.5

You’ll probably still remember my recent conversion of Argel Tal’s daemonic form, a model I am still fairly pleased with, if I do say so myself:


But even while I was putting the finishing touches of Argel Tal’s daemonic version, it was already clear to me that I would eventually have to build another version of the character in his “normal” transhuman form, for whenever the daemonic essence of Raum hasn’t come out to play. It just wouldn’t have seemed like a complete project otherwise 😉

But my original plan was to actually put the alternate Argel Tal version off until some point in the indeterminate future (that’s where hobby projects go to die, in case you were wondering). Alas, it was not to be: I just had an innocent look at the descriptions of Argel Tal in The First Heretic and Betrayer, just for research purposes, you know — and before I knew it, I was halfway through the building process…

So here’s what I have so far:



Once again, a couple of conversion notes:

  • the armour was basically a no-brainer, as Argel Tal is described as wearing a suit of Mk. IV plate, so I mainly used plastic Mk. IV parts, with the notable exception of the breastplate (which is the same Raptor torso I also used for daemonic Argel Tal) and the arms (Mk. III arms, actually, chosen for looking a bit more ornate — only befitting an Astartes captain).
  • the Guardian Spear makes a return here, for obvious reasons. Once again, I chose to change the weapon’s haft, making it look more like a spear — actually, I basically had to go back and recreate the version daemonic Argel Tal is wielding, just for the sake of continuity 😉
  • the cape seemed like a nice way of giving the model some extra bulk and presence and make it read as an officer. It originally came from a half-complete Ivanus Enkomi model fellow hobbyist Augustus b’Raass sent me a while ago.
  • And finally, the head. Now I realise that this could be a divisive choice for some people, but I decided to go with the bare head from the Space Wolves character conversion sprue. Call me crazy, but I’ve somehow always imagined Argel Tal as having long-ish hair. And that particular head really came closest to the mental image of the character I’ve had in the back of my head ever since reading Betrayer. But if you find yourself hating this particular head, don’t fret: Like Kharn, Argel Tal will have an optional helmeted head as well:


Incidentally, there are actually very few conversions of non-daemonic Argel Tal conversions to be found, so I didn’t have much to work from. The one pretty cool depiction I found, however, was this piece of artwork courtesy of Noldonfinve:

artwork by Noldofinve

The piece even received ADB’s official blessing, so I thought it would be cool to take some visual cues from it when building my own version, and I think that worked out pretty well, wouldn’t you agree?

In closing, here’s how the more human Arge l Tal looks next to his buddy in crime:

 


And here’s a comparison showing both versions of the character:

Now all that remains is to actually get these two painted — this whole project has already spun off into enough of a distraction as it is… 😉

 

2. On The Road Again…

In other news, remember the Road Crew?

I realised when taking a look at a couple of my recent posts that it has been a rather long time since I’ve done anything INQ28 related, but that fantastic Sector Mechanicus terrain released recently, alongside Shadow War Armageddon has given me a taste to delve back into the depths of the underhives, and what better way to do that than to keep adding to my fun little band of misfits pictured above?

Now to remind you, the basic idea behind these guys is that they are a colourful collection of former gladiators, former pit slaves, mutants and other undesirables establishing their own little domain in the depths of the world of St. Sabasto’s Reach, a pretty sinister planet, even for 40k standards:

 

St. Sabasto’s Reach

An extremely rich hive world grown fat and depraved through slave trade and the exploitation of its mutant lower class.

The world originally earned its name when the Imperial Saint Sabasto rested here after his great victory on the fields of Belzifer, before engaging in the last stage of his holy crusade for the defense of Velsen against the forces of the Arch-enemy. While Sabasto’s crusade army was still magnificent at this point, it had also suffered heavy losses (a fact, it is argued by some contemporary Velsian historians, that contributed to Sabasto’s eventual defeat within the Veil of Impurity).

When the Saint contemplated the price in blood paid for the reclamation of Velsen, he decreed that the entire world of St. Sabasto’s Reach would be given to the orphans of the slain and that the Imperium would see to it that the children of martyrs would never need to go hungry. This spurred the planetary populace into religious fervor, and countless orphanages and scholae were opened in the saint’s name, earning the world bynames like “The Planet of Orphans” or “The Orphans’ Cradle”.

However, with a slow decline in piety and a general economic recession, many of the world’s orphanages have had to close over the centuries, while others have turned to a far darker trade, giving the world’s epithet a new, sinister meaning. It is true that Imperial organisations like the Schola Progenium, the Ecclesiarchy and even the Inquisition still maintain a presence on St. Sabasto’s Reach and recruit from the ranks of the homeless orphans, choosing the most talented or devout to serve in their respective organisations. And in the deeper levels of the world’s hives, missions and orphanages still offer a real, if meagre, chance for survival to this day. Yet that is only one face of St. Sabasto’s Reach. For at the same time, the world has also become the biggest fleshmarket in the entire Velsen Sector, providing human resources in a very literal sense, from mutant workers to household servants. Moreover, it is rumoured that there exists a slave for every kind of service in the almshouses and slave pits of St. Sabasto’s Reach, and the masters of the world have long prided themselves on being able to cater to every taste and desire, no matter how “eccentric” it may be.

Another mainstay of the world’s culture, the countless circuses and fighting arenas, are also fueled by a constant influx of “material” from the slave pits. At one point, the world’s renowned Circus Imperialis served as a front for a cult of chaos worshippers and was purged by the hand of Inquisitor Antrecht. But even after this upheaval, the remaining slavelords and ringmasters of St. Sabasto’s Reach quickly regained their step, slightly realigning themselves in the resulting power struggle and carving out a new pecking order among themselves. Because the Inquisition’s issue was never with the slave trade itself, but with the presence of heretics, and so the House of Blossoms, the Angelflesh Lodge and countless other establishments like them continue to ply their dark trade to this day…

 

One thing I have wanted to do with this project is to combine a number of established Necromunda archetypes (the Pit slaves and Scavvies in particular) and add a twist of my own. There’s also a fair bit of Mad Max-vibe going on with the project, but I could not quite work out how to emphasise that particular angle when these guys are actually based in the dark, dirty and cramped underhive.

I’ve watched quite a few Let’s Play videos of Metro 2033 and Metro Last Light, by way of YouTuber ChristopherOdd, lately. Both games are set in a postapocalyptic near future where a (nuclear) Third World War has likely wiped out most of the human population on earth. Underneath the ruins of Moscow, the survivors of the apocalypse have turned the Metro tunnels into their new habitat, creating a makeshift civilisation in the cramped confines of what used to be the metropolis’ transportation system. Now I have a bit of a thing for postapocalyptic scenarios anyway, but after immersing myself in the scenario, it hit me: The whole concept of subway tunnels becoming living spaces and an entire ecosystem, if you will, seemed like the missing puzzle piece that would allow me to push the Mad Max angle on my Road Crew project a bit more: What if the lower reaches of the Hiveworld are crisscrossed by a network of transportation tunnels originally created – and mostly still used – to move the vast amounts of goods necessary to keep the world’s overly bloated population alive? St. Sabasto’s Reach has a huge population, even for a Hiveworld, because its most important goods are people, but all of these have to be fed, even if they are only in transit. So I imagine a network of massive, highway-like tunnels far beneath the ground, with smaller maintenance tunnels, substations and similar spaces in between the cracks spiderwebbing off from the main branches of the network. And maybe the Road Crew has taken to raiding some of the transports travelling along those massive subterranean highways: That would allow me to incorporate elements that are typically Mad Max, even vehicles. So with my creativity thus reinvigorated, I assembled some new recruits for the gang:

Now I am actually cheating a bit here, because both the guy with the chainsaw on the left and the guy with the gun on the right were originally built before I had even started thinking about the Road Crew. And yet, without a few minor tweaks, they became pretty cool new parts of the project — I actually love it when a project finally provides a new home to some stray conversions from years ago 😉

The guy in the middle is new, however, and I am pretty proud of him. Meet Cirque:

I don’t think I will ever tire of the particular look that a combination of Ork parts (with their somewhat grotesque, overmuscled appearance and clunky technology) and human sized components will give you — almost the perfect recipe for mutants, if you ask me.

And there’s the Road Crew’s ride, of course, a slightly touched up Gorkamorka Trukk that has become far too small for modern Orks, yet should work really well for my merry band of postapocalyptic ne’er do wells:

Now if only the heat would let up for a couple of days, I could maybe get some of the above painted — keep your fingers crossed for me 😉

Anyway, so much for today’s update. It goes without saying that I would love to hear any thoughts you might have!

And, as always, thanks for looking and stay tuned for more!

The State of the Hunt, Week 7/2017

Posted in 40k, Blood Bowl, Chaos, Conversions, Fluff, Inq28, Inquisitor, state of the hunt, WIP with tags , , , , , , , , , , , , , , , , , , on February 14, 2017 by krautscientist

As it turns out, last week’s decision to force myself to actually sit down and paint something was really for the best: Not only did it result in a model I am really, really happy with — I’ve also managed to keep the creative spark alive until now. So even though I am currently suffering from a rather nasty case of the flu, I have still finished some more hobby related stuff. So let’s take about some of the recent developments today:

 

I. A Chaotic Tome

One of the more frustrating parts of the 2016 Christmas season was my attempt to get hold of a) the Traitor Legions Codex Supplement, b) Canoness Veridyan and c) the Index Chaotica book. The Canoness, in particular, sold out about three or four times, and once the model was finally back in stock, the Index Chaotica was gone for good — or at least that’s what it looked like then.

index-chaotica-1
Enter fellow hobbyist Augustus b’Raass (whose fantastic work you might want to check out here, by the way): Auggs was nice enough to swing by the Amsterdam GW store, pick up a spare copy of the book and send it my way — that was really awesome and yet another proof that this hobby of ours is full of wonderfully generous and thoughtful people!

As for the book itself, while I am writing this, it seems to be back in stock, so is it worth it? I’d say so, yes. The cynic in me wants to poke fun at the fact that it’s basically a – ever so slightly haphazard – collection of pre-published content, but then the stuff from Realm of Chaos, for instance, is only really available in the original books, and you’ll be paying through the nose if you want to obtain one of those. Plus the vintage chaos content is simply that good: sinister, evil, spiky and occasionally darkly humorous. And some of the classic artwork is still spectacular.

For instance, I was elated to find within the book a wonderfully vibrant reproduction of Geoff Taylor’s iconic World Eaters illustration. In spite of being decidedly old skool, it has also managed to age incredibly well, if you ask me:

index-chaotica-2
There’s also this WFB-chaos centric piece from the same artist that actually almost seems like a companion piece of the World Eaters picture:

index-chaotica-3
I still remember when this image appeared on the box of the Chaotic paints set (Tentacle Pink FTW!), and I was spellbound and tried to figure out what I was actually seeing — the lumbering war machine in the back was especially fascinating, as it subtly hinted at a WFB/40k connection. From a modern standpoint, I’d say it’s actually a depiction of a Lord of War, a Khornate daemon engine from Epic 40k that eventually grew into the modern Lord of Skulls. It also serves as living proof of how much more awesome GW artwork was when it didn’t limit itself to picturing available models — but that’s a subject for another time.

Speaking of Khorne, the Khornate content alone is basically worth the price of admission and should provide me with lots and lots of new ideas. And while the internet will provide you with lots and lots of fuzzy scans of vintage GW artwork, there are still some surprises to be had here, among them an elusive Jes Goodwin sketch for a dedicated heavy support World Eater:

index-chaotica-4
Actually, Jes Goodwin’s design sketches are yet another reason to pick up the book: I cannot help marveling at the quality of his concepts for the four cult legions and the original 2nd edition CSM special characters –incredible stuff!
Oh, and let me just state for the record that the book obviously wouldn’t have been complete without the wonderful berzerker on the right courtesy of Mark Gibbons! 🙂

So anyway, I’ve spent some very enjoyable weeks going back and forth through the book and immersing myself in the rich background for the chaos powers. I am ever so thankful to Augustus b’Raass for getting me a copy, and I suppose I’ll have to come up with something special in order to make it up to him — cheers, buddy! 🙂

 

II. A Merry Band of Misfits

I didn’t merely spend my time browsing through iconic chaos content from the yesteryear, though: Some of you might remember this little project here from last year: The Road Crew:

the-road-crew-2016
Now this little warband project was basically started as a fun diversion (and as a way to channel some of the influences from the Mad Max universe), but before I realised it, it had already started to take on a life of its own, coagulating into a little retinue.

The basic idea here was to start with some of the pit slave tropes introduced by Necromunda, but move beyond those character archetypes to include mutants, gunmen or even former Imperial adepts and shape them into a gang of malcontents that have disappeared between the cracks of the 41st millennium.

Now if you take a look at the image above, you’ll realise that there are already quite a few beefy warrior types — but this outfit still needed some brains. That’s why I built this guy last year:

Doc WIP (5)
Where the more gladiatorial types are muscular and crudely augmented, I wanted a gaunt and more delicate look for the brainy guy, and a combination of AdMech parts led to an outcome that was pretty close to my vision. The interesting task was to make a model that is so different from a structural standpoint look like it still belonged with the group. I tried to achieve that via a suitably strong paintjob, and here’s the result of that little endeavour:

solon-antonov-1
solon-antonov-2
solon-antonov-3
solon-antonov-6
solon-antonov-4
This is Solon Antonov, nicknamed “The Doktor”, formerly a low to mid-tier member of the Adeptus Mechanicus who stationed on St. Sabasto’s Reach to select suitable slaves to undergo augmetic modification and be transported off-world, to spend the rest of their sad lives toiling away in one of the mines or forges of the Velsian Adeptus Mechanicus. But, surprising enough for a man mostly made from metal by this point, Antonov discovered he still had a heart after all, and absconded with a group of slaves. Ever since, he has been the brains behind the “Road Crew”, tasked both with planning their activities and with the “maintenance” of its various members.

As you can see, I used the exact same colours on Antonov and the gladiators, with the scratched and damaged yellow armour serving as the element that really pulls the models together. I was actually happy enough with the outcome that I started to work on the next model right away. This little guy here:

Twist Witch Doctor (1)
I thought a mutant witch doctor type would nicely expand the character of the warband beyond a mere gang of pitslaves, even if this guy may initally seem a bit far out. Anyway, he’s still a little rough around the edges and needs some finishing touches, but here are some photos of the nearly finished model:

twist-witch-doctor-1
twist-witch-doctor-2
twist-witch-doctor-3
twist-witch-doctor-4
All in all, this project is a lot of fun, because it allows for some very organic kitbashing and painting. It’s also a nice vehicle for telling a somewhat more intimate story: These guys aren’t part of the fight for the Emperor’s soul, they just want to get by. That being said, it’s kinda interesting to explore the contrast between their humanity and their somewhat distressed, grotesque outer appearances.

So here’s the entire gang so far. Meet the Road Crew:

the-road-crew-early-2017-2
From left to right: Crusher Vexx, Tiny (the Road Crew’s battle captain), Doktor Antonov, Grimspyke, Chopper and the PIP twist witch doctor (if anyone has a cool idea for a name, I’d love to hear it).

So what’s in store for the Road Crew? I think there’ll be one or two additional members, and a suitable ramshackle ride for them — I already have a plan on that account. Keep your eyes peeled! 😉

 

III. A Squig-shaped Surprise

And last but definitely not least, imagine my surprise when I visited my friend Annie last week for one of our semi-regular painting sessions, only to present me with two wonderfully characterful squig-shaped dice for my Blood Bowl team, the Orkheim Ultraz:

squig-shaped-counters
These lovely little models can be picked up at Comixininos, and they should make for excellent turn/reroll counters for my team! And I really love how Annie painted them to perfectly match the colours of the Orkheim Ultraz:

orkheim-ultraz-early-2017
Thanks so much for the amazing gift, Annie! 🙂

By the way, we’ll be taking a closer look at one of Annie’s Blood Bowl teams in the near future, if only to show you her fairly different approach as well as her balls-to-the-wall crazy and creative ideas for the team. You should definitely look forward to that!
So yeah, as you can see, I am finally back into the swing of things! And I would love to hear any feedback you might have — just drop me a comment or two! And, as always, thanks for looking and stay tuned for more!

Inquisitor 28: The Road Crew slowly takes shape…

Posted in 40k, Conversions, Inq28, Inquisitor, paintjob, WIP with tags , , , , , , , , , , , , , , on April 6, 2016 by krautscientist

Today I would like to share some new models from one of my recent projects with you. You probably still remember the kitbashed pit slaves I created fairly recently, along with the first ideas for a small gang of escaped former slaves and mutants from the world of St- Sabasto’s Reach (and if not, you can always go back and read up on it all here 😉 ). Anyway, here are the two gladiators I had when we last heard of this particular project:

Pitslaves (2)
I have begun to refer to this growing warband as “The Road Crew” in the back of my head for some reason. Maybe it’s because they do take a bit of an inspirations from settings like the one in Mad Max: Fury Road (as well as tangentially related settings from videogames like Fallout, Borderlands, or what have you). Maybe it’s the yellow reminding me of heavy duty construction engines? Or maybe I just like the sound of the name?

Now the next model in line for painting was this mutant brute based on the Bloodstoker from the Age of Sigmar starter box:

Mutant Overlord WIP (4)
I think you’ll agree with me that there’s a pretty obvious Mad Max vibe going on here, especially with regards to the facemask and trophy pole, right? Anyway, I painted the model, applying the recipe that had already proved fairly successful on the pit slaves.

Here’s the finished model, Tiny the Brute:

Mutant Overlord (2)
Mutant Overlord (3)
Mutant Overlord (4)

Mutant Overlord (6)
Now if you look at Tiny next to my recently completed pit slaves, you’ll see that there’s a common look and feel to the models, in spite of the new model being fairly different in nature:

Pitslaves (3)
I think the paintjob does play a fairly big part in drawing these models together into a cohesive whole, but there’s also a certain feeling of coherence beyond that. And that is really something I want to explore with this warband: a collection of models of different shapes, sizes and archetypes that still read as a fairly cohesive gang. I think I’ll be drawing lots of inspirations from classic Necromunda gangs, such as Goliaths, Pit slaves and Scavvies, but I would also like to blur the lines between those factions a bit: The hard divisions between the various gangs make lots of sense for a game like Necromunda, where you simply need several different factions. But there’s also enough overlap between the various gangs that a warband taking inspirations from several different sources should work out really well — and in any case, INQ28 is all about the grey areas and thus has little need for clearly defined borders, right? 😉

So since I really wanted to take the idea of exploring different shapes and sizes for the various gang members further, I chose something even more extreme – in a way – for my next model:

Chopper WIP (1)
Chopper WIP (4)
A diminutive mutant wielding a huge evsicerator. The model was originally one of those “bonus gnoblars” you get with several of the Ogre Kingdoms kits. I love those guys, both because they are very characterful and because it’s fairly easy to convert them into something that seems right at home in the 40k universe: In this case, all it took was a hooded head from the AdMech Skitarii Rangers, a Khorne berzerker chainsword and some odd bitz and bobs.

Painting this guy was a fairly quick affair, yet the challenge was to make the recipe I already had in place work on a model that is very different from the hulking brutes I had painted so far. In the end, it came down to featuring enough of the yellow to serve as a visual tie-in. And I had cunningly added another armour plate to the model’s right shoulder beforehand to give myself an extra yellow area 😉 Anyway, without further ado, heeere’s Chopper:

Chopper (2)
Chopper (1)
Chopper (3)
This has mainly been a quick and fun model, and I don’t really see him as a character with huge ramifications for any greater narrative, but I think he provides a nice extra bit of flavour to the warband and manages to move them beyond mere pit slave archetypes.

Funnily enough, Chopper has also managed to attract a bit of a fan club at various forums: DexterKong even mentioned his intent to put the small guy on a T-Shirt to wear at the gym. So if anyone wants to follow his lead, I whipped up a small T-Shirt design for your perusal:

Hereschopper02
A hires version of the image is, of course, available 😉

So here’s a look at the models I have so far:

Pitslaves (5)
I am pretty happy with these guys, especially since they have come together so quickly and organically. I also think they look rather striking as a group — it must be the combination of deadly weapons and that bright yellow 😉

One thing I have decided not to include on these models are hazard stripes, though, even though they might seem like a natural addition. This is something I decided right out of the gate, ecause I really wanted to suggest a slightly industrial look without overdoing it, and hazard stripes would just be that little bit too much. I also didn’t want these guy to look like Iron Warriors auxiliars 😉

So what else is in store for the Road Crew? Well, I have already started building the next member, a former Tech-Priest, codenamed “Doc” for now, serving as medicae/mechanic/possible leader?! to the escaped slaves:

Doc WIP (4)

Doc WIP (5)

Doc WIP (3)
This was a slightly fiddly conversion, because I had to make the Ruststalker legs conform to the general shape outlined by the Skitarii Trenchcoat. It all worked our rather well in the end, however, and I rather like Doc’s tall, gaunt appearance.  The mostly organic face was also a very important (and conscious) choice, as it represents a certain amount of humanity, something we don’t see often in a member of the Adeptus Mechanicus. Somehow I really like the idea of a former Tech-Priest who rediscovered a part of his humanity in the slave pits of St. Sabasto’s Reach and went rogue as a consequence.

DexterKong also suggested this guy may be the Road Crew’s “bookie” as well as their mechanic, organising fights and assignments for the group to enable them to assemble the credits and tech to keep functioning as a fairly independent outfit. Anyway, it feels like this guy is definitely a keeper!

Maybe this twist witch doctor I built a while ago would also be an interesting addition to the gang:

Witch Doctor WIP
Now he may seem like a pretty odd fit at first glance, but keep in mind that I would really like to branch out into some more out there character types: I actually want to get a bit more visual variety into this warband, so that they don’t read as merely pit slaves or mutants, but as a coalition of escaped slaves, shady characters and lost men. I think a shamanistic twist witch doctor might just be the colourful touch I need for that. He could even be a follower of a particularly devolved and archaic variation of the Imperial Creed, with the Emperor as some kind of totem?! We’ll see…

One thing that I definitely want to add to the gang at some point is this:

PickUp WIP (1)

An old Gorkamorka trukk that I’ve had in my bitzbox for quite a while. The original plan was to use it for my Traitor Guard, but it seems far more appropriate in an INQ28/Necromunda setting. Plus it would be a cool asset to have for INQ28 games in general, once painted. So I tweaked the driver a bit, making him look suitably postapocalyptic:

PickUp WIP (2)
PickUp WIP (3)
The vehicle itself needs some more bitz and bobs – a bit of additional gear here and there, but nothing too drastic. I think much of the appeal will come from a suitably grimy and weathered paintjob.

I think these models would make for some rather neat additions and create just the kind of visual variety, different shapes, sizes and archeytpes I want for the Road Crew:

New members WIP

More than anything, though, these guys really are a fun diversion, and it’s pretty cool to just go with the flow and see where inspiration takes me. Of course it goes without saying that I would love to hear any ideas and feedback you might have, so just leave me a comment or a suggestion!

And, as always, thanks for looking and stay tuned for more!

Pitslaves (4)