Archive for games workshop

Change we can believe in — a closer look at the Thousand Sons release

Posted in 40k, Chaos, Conversions, Pointless ramblings with tags , , , , , , , , , , , , , , , on December 7, 2016 by krautscientist

Oh my, it has really happened… The rumours seemed far too crazy at first, but now here we are with the first actual Daemon-Primarch and what could be the beginning of a complete (and much needed) design update for the entire CSM faction, especially when it comes to models for the cult legions (I am crossing my fingers so hard it hurts, as you can probably imagine).

That remains to be seen, though. For now let us focus on the new Thousand Sons, as that means we have enough on our plate as it is.

I may have mentioned before that I usually find Tzeentch the hardest chaos god to like, mostly due to the whole wanton mutation angle: The daemonic servants of Tzeentch are often too abstract for my taste, and the often heavily mutated mortal servants also tend to leave me cold — what can I say, I am a Khorne “heavy armour and no nonsense” kind of guy through and through 😉

That being said, I have always liked the concept of the Thousand Sons very much, precisely because they put such a nice spin on the usual Tzeentchian approach: Ahriman’s Rubric was an attempt to stop the very mutating powers that usually plague servants of the Architect of Fate, and it ended up creating an army of unfeeling, disembodied combat automata — the exact opposite of what you would expect of a Tzeentchian host (and then again, the subversion is delicious, of course, this being Tzeentch we are talking about). Anyway, there’s something clever and interesting about the legion, and the Thousand Sons are also, arguably, one of the most tragic traitor legions, so there’s much to like there in concept. And now we finally see them as a fully fleshed out model release — I never thought I’d see the day!

I also think it’s a rather clever approach to release 30k and 40k Thousand Sons back to back like that, and once again, there’s delicious irony in the fact that both are released at the same time while 10 millennia have passed in the background between both incarnations of the legion. A clever bit of planning there — if it was planned in the first place, of course. But, again, it’s Tzeentch we are talking about here, so yeah…


Before this all gets a little bit too meta, however, let’s just focus on the models, take a look at all the different parts of the release and consider some of the possible conversion opportunities.

Before we begin, allow me to point out that, once again, there is something I would like to think of as an unofficial companion piece to this review over at Wudugast’s blog, and I recommend you check it out as well.

So here we go:


Magnus the Red, Daemon-Primarch of the Thousand Sons

thousand-sons-release-3So yeah, it seems like Daemon-Primarchs are now officially a thing in 40k. Good thing I already made one earlier this year 😉

But anyway, it’s obvious that this is a pretty exciting development, especially given the fact that our only look at the Daemon-Primarchs in model for so far were the respective Epic 40k versions — and the less said about them, the better…

If we look at the model at hand, I have to say that Magnus looks pretty much exactly the way I always envisioned him — well, except for the chicken feet, maybe 😉
But even an element as unexpected as the avian feet works pretty well for giving the model a Tzeentchian look without sacrificing any of Magnus’s impressive physicality.

It pleases me immensely that there is quite a lot of Wayne England’s interpretation of Daemon-Primarch Magnus in the model, because you just cannot go wrong with taking cues from Wayne England, if you ask me:

illustration by Wayne England

illustration by Wayne England

What’s more, all the changes made to Wayne England’s design certainly make sense: I already mentioned the avian feet above, and the inclusion of feathers on strategic points of the model (and the choice of replacing the classic daemon wings in the art with feathered wings) all enforce Magnus’ connection with classic Tzeentch imagery. These elements also make him look like a scintillating hellish bird of prey — rather fitting for Tzeentch’s favoured daemonic servant. One could argue that the finished model is almost too fabulous — but come on, which other Primarch would warrant a look as exalted as this, if not the lord of sorcerers? Well, Fulgrim perhaps, but we’ll be getting there, I suppose… 😉

The model is also pretty enormous, easily towering over even greater daemons (which probably doesn’t bode well for my Angron conversion. Bugger!):

As is always the case, however, it’s the small things that make or break even a huge model like this, and GW has certainly put in the required work:

I really love the inclusion of three different heads, for one: The actual cyclopean face – for all its dorkiness – echoes the classic Epic model and the vintage depiction of Magus in the fluff. What’s more, the three different faces also mirror a particular scene in Aaron Dembski-Bowden’s Betrayer where Magus’ face seems to be jumping between different versions while you look at him — and I really, really love that little bit of lore represented in model form!

Personally, I prefer the masked face, both for its mysterious and regal qualities and because it’s not quite as gnarled as the other two.

I also like the fact that we get the choice of arming him with either a glaive or a Kopesh. If you ask me, the sword seems like the more elegant solution, mostly because that huge ball of energy forming above the glaive’s blade doesn’t quite come together visually:


I wonder if this “multiple choice” version of characters will happen more often in the future, as the classic approach is to have one version for a special character and no options whatsoever. Such are the liberties of plastic models, I suppose…

There’s also an incredible amount of detail on Magnus’s armour, and all of those embellishments don’t merely serve as decoration: It seems like there’s a real depth of symbolism here, with layers and layers of callbacks to the lore – or, indeed, to real world culture – for us to figure out. Wudugast has done a fantastic job of pointing out many of these elements in his aforementioned post, and it would be remiss of me to steal his work here, so make sure to give it a look.
I wonder why his right hand is so freakishly big, though. Is there some explanation for this in the lore? Or is that just his literal Red Right Hand? (Badum-Tish! 🙂 )

Speaking of red, though, I have to say that the ‘Eavy Metal paintjob of the new model – while technically impeccable, of course – makes Magnus look a tad too pink for my taste. Fellow hobbyist Tzen is currently doing a paintjob in a darker red, and with feathers that almost look crystalline — I am really looking forward to the results! Check out his progress here.

All in all, I think Magnus is a really worthy first Daemon-Primarch, and I am really looking forward to seeing his brothers rendered in equally monstrous forms! At the same time, I cannot stop wondering whether was it really clever to release the Daemon-Primarch version before the regular FW Primarch version. I think there’s a very real danger of the “mortal” version ending up feeling slightly underwhelming now — oh well, I guess FW’s sculptors will just have to give it their best shot 😉



After Eldrad Ulthran and Khârn the Betrayer, Ahriman is the third classic 2nd edition Jes Goodwin model to be given a redesign, and it should be obvious that these models are the ones to be nervous about, given the originals’ iconic quality.

The first thing to note, then, is that the model definitely reads as Ahriman, and in a bit of a surprise, the new version might actually be closer to Jes Goodwin’s original sketch than the classic version:


Nearly all the iconic elements of Ahriman’s previous incarnation are accounted for: the horned helmet, the sorcerer’s staff topped with the same gazelle horns, the robes and high collar — even the pose is very close to the original! This is obviously the same guy, only in a slightly more modern version.

thousand-sons-release-11There are a couple of devations (or rather, evolutions) of the classic design, however: For one, the new model has much more depth and dynamism, whereas classic Ahriman is very much a product of his time: I remember a WD article where Jes Goodwin said that Ahriman was one of the first 40k models to get actual additional pieces for added depth instead of being single-piece. Now the new model continues this approach and adds lots of depth to the character, making him look dynamic and like he has some agency while basically standing still:


At the same time, the model neatly keeps the original’s arrogant pose — the addition of a disc of Tzeentch arguably even enforces Ahriman’s haughtly look: He’s just too important and powerful to merely walk.

Now I’ve never been a huge fan of the whole disc idea, which is why I appreciate the fact that a) the disc is an optional part of the model and it’s just as feasible to just have Ahriman on a base like the original version and b) the designer went for a less creepy crawly approach, making the disc look more like an arcane machine, which is a great fit for Ahriman’s character! And there’s even a scarab symbol on top of the disc — a very nice touch!

In fact, it’s subtle touches like these that really sell the model as an evolution instead of a mere retread of the older model: For instance, the buffalo skulls dangling from the stole around Ahriman’s neck on the original model, have been exchanged for more delicate occult doodads, which seems like a much better fit for the character.

However, I do have some very minor quibbles with the model, even if all of these are plainly based on personal preference: That sorcerous flame in Ahriman’s left hand is a bit of an acquired taste for me — but can arguably look amazing when painted well. While I love the rest of the official paintjob, though, the flame just doesn’t work all that well in green and blue. Or maybe I just miss the hand holding the bolt pistol? For some strange reason. It’s a surprisingly iconic part of the original model for me.

On a related note, I find myself going back and forth over whether I like the original helmet better (I think I do — it has something to do with the precise proportions and angles of the faceplate).

But when all is said and done, Ahriman stands as possibly the best re-envisioning of a classic Jes Goodwin model to date. Much better than Eldrad and even with a bit of an edge over the new Khârn. And what’s simply beautiful is that – due to the new model being so similar to the classic version – the excellent mix of similarity and contrast between the 30k and 40k versions I described in my last review remains firmly in place:



Thousand Sons Exalted Sorcerers

I love building characters, so this is really the perfect kit for me, allowing for three highly individualised sorcerers with lots and lots of options. One thing that strikes me about the kit is how many mutated bits are featured, as this seems like a slight readjustment in the fluff to me — didn’t the Rubric of Ahriman stop the flesh change outright in those with enough sorcerous power? Then again, maybe the millennia in service to the god of change were just too much. Anyway, expect lots of mutations of the avian variety.

In all fairness, however, those bitz are fairly excellent, especially the plethora of staffs and heads we get out of this kit!


There are also many charming little touches on those parts: The sorcerous hand using an ectoplasmic flame to reload a bolt pistol might be a bit much, but I do love the avian skulls on this guy’s stole seemingly snapping at the enemy:

Also, can we just spend a moment in quiet contemplation at the beautiful way the cloth has been attached to the same sorcerer’s backpack:

In fact, the backpacks are probably one of the best parts of the kit, making the best possible use of Egyptian and Tzeentchian elements to create a unique silhouette for each of the sorcerers — this is an excellent touch that we need to see more of, especially because, for the most part, CSM backpacks only used to be a bit of an afterthought so far.

I also rather love the avian feet on this guy:

Upon closer inspection…what exactly is keeping him aloft, though? Is it sorcerous power or…erm, something altogether more nefarious?

Nice as the three models featured on the product page are, however, I almost prefer the alternate builds that were showcased earlier, on GW’s new community site:

Even when the sorcerers are more mutated than their ghostly brethren, they are arguably more disturbing when fitted with concealing helmets, leaving their exact nature ambiguous (I also really love the raptor-like look of the top left guy with that sweet Mk. VI variant helmet).

Maybe the biggest strength of this kit lies in how it gives you the freedom to build your sorcerers exactly how you like them best: As overly mutated, massively corrupted creatures of chaos. As masked and mostly unchanged, yet also subtly touched, master planners. Or as something in between.

Whatever you do, the models you end up with will look powerful and arcane, and there’ll be a really nice contrast between their warped, dynamic forms and their more regimented Rubricae brethren. This is easily one of the most tempting parts of the release for me, in spite of the odd moment of silliness 😉


Thousand Sons Rubric Marines

thousand-sons-release-19In a way, this was the one kit they just had to get right, even moreso than Magnus and Ahriman: The Rubricae are what defines the look of the Thousand Sons more than anything else, so they had to make this count. And if you ask me, boy did hit it out of the park with the new Rubric Marines!

I remember the first Thousand Son I ever saw, one of Jes Goodwin’s iconic set of models for the cult legions, appearing in the colour section from the 2nd edition rulebook:

jes-goodwin-cult-legionariesIt’s utterly astounding how – even decades later – those four guys still stand among the best models ever designed for the cult legions. And the Rubric Marine was just lovely, hinting at an arcane and mysterious legion through visual cues: You got an excellent idea of what the legion was about simply by looking at this model, without ever needing to read a single line of background.

During the 2000s, we saw a dedicated Thousand Sons conversion set, based on some of the design cues from that first proof-of-concept model. And while the conversion set was nice enough for its time, it never really lived up to the quality of Jes Goodwin’s original Thousand Son. Then several Space Wolves models tantalisingly featured the iconic helmet as a trophy – trampled underfoot, no less – and ever since I have been hoping for a true successor to that first Rubric Marines.

And the new guys really fit the bill:

Seriously, I just love them! The strongest part of the cult legions’ design was always in strong silhouettes and clear visual cues. And the new Rubric Marines absolutely deliver on that, clearly reading as Chaos Space Marines, followers of Tzeentch and Thousand Sons at the same time. The helmet designs are just beautiful, and the flowing lines of the armour trim really takes the classic CSM design to the next level. The added tassets are an excellent little touch. I also love how the new Rubric Marines have their own dedicated backpack designs!

As a  bonus for fans of the Horus Heresy, there’s a marked resemblance between the Rubricaes armour and Mk. IV power armour, which begs the question: Will we go back to certain armour types being associated with certain cult legions? I would really love to see bulky Mk. II Plague Marines and massive Mk. V World Eaters whose armour is covered in studs and bolts!

In addition to the beautifully redesigned bolter-wielding Rubricae, we also get some new weapon options, which certainly makes sense:thousand-sons-release-23
Well, those flamers certainly look Tzeentchian to me! 😉

Plus we also get the most arcane looking rotary cannon ever witnessed by Man:

If I have one minor gripe about the kit, it’s merely the fact that the new sorcerer cannot quite match the excellent old one, a model only available as part the classic upgrade set:

What can I say: I just love that guy 😉

But all things considered, this is a stellar new kit for the Rubric Marines, and arguably a cornerstone of this release. Excellent work!


Thousand Sons Scarab Occult Terminators

Oh wow, dedicated traitor legion Terminators — yet another pleasant surprise! Even better, though, is that the Scarab Occult Terminators look completely unlike vanilla CSM Terminators and yet perfectly read as Thousand Sons. Make no mistake, I am really fond of the classic CSM Terminator look, spikes and tusks and all. But for the Thousand Sons, something more elegant and less barbaric seems far more appropriate.

By the same token, all the strengths of the new Rubric Marines are present on the Terminators as well, — in fact, there’s a palpable sense of visual coherency between the two kits, with many of the design elements (the Keltaran helmet crests, the flowing lines of the armour trim, the avian skulls and weapon designs) appearing across both kits, allowing you to field very different troop types that still look like they belong to the same traitor legion.


thousand-sons-release-29And in another parallel to the Rubric Marines, the Scarab Occults’ Terminator armour also clearly resembles an established Heresy era armour mark, namely the Tartaros pattern. Again, this seems like a very interesting (and possibly promising) design decision that I hope will be used again on possible future traitor legion releases — it also really enforces the notion that the armour dates back to the actual Heresy era, which certainly makes sense, given the fact that the victims of Ahriman’s Rubric have been bodyless automata for millennia, with no need (or even ability) for changing their armour.

Let me also mention that the squad champion/sorcerer just exudes a sense of elegance and terrible dignity

thousand-sons-release-27Also, chain kopesh swords FTW! 😉

Between the Rubric Marines and Scarab Occult Terminators, it’s possible now to build a Thousand Sons army that is visually distinctive, with a strong identity for the legion. And that’s really a brilliant development for CSM players, even moreso considering the quality of the new sculpts!




The inclusion of these guys is certainly a bit of a surprise — although I guess all the signs were there to see back when plastic Tzaangors first appeared as part of the Silver Tower boxed set. Even so, it’s certainly nice to have dedicated Tzeentchian beastmen available now, mostly because the classic goatman look doesn’t really fit the Changer of the Ways all that well…

While its’s fairly obvious that the multipart Tzaangors share many common design traits with the Tzaangor models from Silver Tower, I would argue that the multipart models are not quite as good as the Silver Tower guys: The latter just seem to have the more iconic poses — which is easier to achieve with a monopose model, of course, but what can I say: Just look at those fantastic poses:

Silver Tower Release (10)
On the other hand, there’s a real benefit to the multipart nature of the new kit that goes beyond the usual flexibility offered by plastic kits: It looks like kits that cross over between 40k and Age of Sigmar are now officially a thing again (even beyond the Chaos Daemon line of models, that is), as a closer inspection of the sprues reveals an extra sprue that can only be considered a dedicated 40k weapons sprue, when the other sprue seemingly has the more medieval looking weapons intended for AoS.

All things considered, these guys are maybe the weakest parts of the release for me. But I think we can let it slide, both because we didn’t even expect 40k Tzaangors in the first place, and because the proper Thousand Sons models make for a pretty robust competition. When all is said and done, it’s still a nice kit that provides Tzeentch players with some interesting new option!


Conversion options

Oh man, the chaos community is going to have a field day with these new kits! And I, for one, can hardly wait for talented folks like Aasfresser, for instance, to put the new bitz through their paces! For now, let me just jot down some quick ideas for possible conversion projects involving the new models:

First up, the obvious idea: I think that many parts of this release would work brilliantly for 30k Thousand Sons as well!
To wit:

  • the Scarab Occult Terminators could be used as, well, 30k Scarab Occult Terminators with next to no need for further conversion. In fact, the kit almost seems like the first dedicated unit for a specific legion to appear in plastic and not as a FW upgrade set. I would like to see more of this, please! 😉
  • by the same token, it’s also possible to use parts from the Scarab Occult for 30k Thousand Sons Praetors and officers.
  • there’s also nothing stopping you from you from sprinkling some of those new Thousand Sons bitz on top of your 30k Thousand Sons, seeing how the legion grew more and more towards the arcane by its latter days as a loyalist legion, and how things like the iconic Keltaran crests had obviously taken root within the legion far before the present day of 40k (at least judging by their mention in “The Talon of Horus”, which is set not too long after the Heresy). The brilliant thing is that you bascially get to decide “how far gone” you want your Thousand Sons to be: Have they only started their descent? In that case, just add a staff or helmet from the new kits here and there. Do they already embrace the sorcerous powers more actively? Then you can use more and more 40k Thousand Sons bitz to create Marines that look more and more like sorcerers –and have begun to display physical changes.
  • expanding on that last part, mutation bitz from the Exalted Sorcerers could be used to depict 30k Thousand Sons in the throes of the flesh change.

I also think that all of those gorgeous helmets, mutation bitz and arcane doodads also allow for quite a bit of crossover between 40k and WFB/Age of Sigmar: So why not use some of those helmets and bitz to create a warriors of chaos warband that really looks Tzeentchian?

Back to 40k – and, arguably, INQ28: The Tzaangor weapons could be used to turn Khairic Cultists from Silver Tower into Tzeentchian cultists for the 40k setting. Or you could use the same weapons to give chaos cultists from Dark Vengeance that extra bit of Tzeentchian oomph.

And finally, why not use those Tzaangor bodies and heads to create your own, strangely avian xenos species for INQ28 — or your Tau army? Speaking of Tau, maybe those Tzaangor parts would also be promising if spliced together with Kroot bitz?!


All in all, this is a truly stellar release for CSM players, arguably made even better by the fact that it wasn’t really expected in the first place. Even if we don’t get any more modernised CSM models, it’s already a great addition to the armouries of chaos. Certainly more than I expected in every conceivable way!

I also love the fact that a chaos god other than Khorne or Nurgle is finally getting some love. I’ll never tire of Khornate and Nurglite kits, of course, but let’s just face it: It was really somebody else’s turn this time around 😉

At the same time, it won’t surprise you to learn that I really wish for more plastic cult troops (we *need* new Khorne Berzerkers! And Plague Marines!) and updated vanilla CSM. Let’s just dream for a moment: How awesome would it be if we could only get this amount of quality for the rest of the traitor legions — maybe only one kit each? We can always hope! And if nothing else, if the sheer quality of the new Thousand Sons is anything to go by, we may be in for quite a ride indeed!


So what’s your take on the new models? Are you as pleased as me or did you expect more? And are there any conversion ideas you would like to share? I’d be happy to hear from you in the comments!

As always, thanks for looking and stay tuned for more!


The State of the Hunt — Week 45

Posted in 40k, Chaos, Conversions, paintjob, Pointless ramblings, state of the hunt, WIP, World Eaters with tags , , , , , , , , , , , , , , , , , , , , on November 8, 2016 by krautscientist

So, like I said, I was at a conference last week, visiting the PLAY 16 festival at Hamburg and spending a couple of days in the city. I think I have mentioned previously that, in addition to being addicted to cutting up little plastic men, I am also a huge videogame nerd, and the subject also happens to factor into my professional background of working in the field of media literacy. So allow me to begin this week’s post with some comparatively off-topic rambling:

PLAY is a festival dedicated to the artistic, creative and educational purposes and potentials of videogames, and this year’s subject was “Let’s get physical!”, so the various events, workshops and presentations dealt with the representation of bodies in games, ranging from the design of characters, archetypes and player avatars to the interactions between the game world and the player’s actual body, be it in the form of motion contol or even virtual and augmented reality. The festival was fascinating and fun, and certainly not short on highlights: For instance, I had the opportunity to try out Triangular Pixels’ VR game “Unseen Diplomacy”, which was a truly stunning experience — I hadn’t expected VR to be so, well, immersive at this comparatively early point!

Another highlight was the fact that the Museum für Kunst und Gewerbe Hamburg (MKG) is currently running a huge exhibition on the history of videogames, with many, many playable classics from 30+ years of gaming culture (I was appalled at how badly I was doing when playing OutRun on an actual vintage arcade cabinet). In addition to the actual games, the exhibition also features lots of concept artwork from modern classics like Shadow of the Colossus or Ico:


I was particularly delighted when I discovered a whole wall of brilliant concept art from DoubleFine’s Psychonauts, a personal favourite of mine:

So if you live anywhere near Hamburg or should find yourself visiting the city in the near future (or until the end of April 2017), and if you’re even the slightest bit interested in videogame culture, you should definitely check out the Game Masters exhibition! It’s very educational, but also great fun! Plus the museum also has many more exhibitions for you to discover, of course. I was sadly unable to check out the exhibits on Art Nouveau due to time constraints, for instance, so I might have to plan another visit soon…

Let me wind up this part of the post by showing you the room that housed the last workshop I participated in before travelling back home. This room is also located at the MKG and was once the cafeteria of German news magazine Der Spiegel:


It also provided the perfect photo opportunity for getting material that should make for suitably psychedelic desktop backgrounds:


Anyway, before we veer completely off course, rest assured that I did of course do something hobby related as well while I was in Hamburg: It goes without saying that I took the opportunity to drop by one of the local GW stores. Now what really impressed me was the level of painting on display at the store, courtesy of the staff and some regulars, so I snapped inspirational pictures left and right:


DISCLAIMER: This should be fairly obvious, really, but none of the following stuff is mine, and I don’t claim any kind of credit for it! If you should recognise one of your models and would like to be mentioned, just give me a holler and I’d be glad to edit your name into the post!

Anyway, my first port of call was this very awesome Khornate Daemon army painted by one of the store’s regulars:


Possibly my favourite conversion was the Bloodslaughterer-based Soulgrinder:

And while it wasn’t part of the same army, I also really love this slightly converted Maulerfiend:

My favourite parts are the Bloodletters leading it to battle by a chain and that delicious brass recipe!

The biggest surprise was to discover something that I first considered to be a cool recreation of an iconic – and rather well-known – piece from the internet, but which almost certainly turned out to be the genuine article upon closer inspection:

And because you can never have enough Inquisitor-scaled Astartes, there was also this beautiful 54mm Librarian (cheers to Inquisitor Mikhailovich for correcting that oversight!), based on the same vintage Captain Artemis:

So yeah, brilliant stuff all around!

Of course I couldn’t leave the store without making a sizeable purchase. So yeah, this happened:

The good folks at the store were nice enough to reserve their last copy of The Burning of Prospero for me, so there goes my next hobby year, I suppose 😉

Seriously, though, I am pretty sure I’ll be talking about the contents of the box in more detail sooner rather than later. For now, suffice it to say that I am actually awestruck by the quality of the casts: GW’s plastic models have been rather spectacular for quite a while now, but it really seems as though each boxed set sets a new benchmark for crispness of detail. Very nice! You can also find my thoughts on the models contained in the boxed set here, should you have missed them.


Speaking of which, I actually kitbashed one particular model as a kind of preparation for the release of The Burning of Prospero, incidentally:

As you may already have noticed, I really enjoy building 30k versions of my 40k World Eaters characters. Now back when it didn’t look like I would ever create any 30k models of my own, fellow German hobbyist AgnostosTheos created a 30k (pre-interment) version of one of my characters, Khoron the Undying:

Pre Heresy (8)

In the 41st millennium, Khoron has been a Dreadnought for several millennia, yet he has also been an invaluable adviser to Lord Captain Lorimar since before the Heresy, as he was already a veteran of the 4th company even before Lorimar won his captaincy in the fighting pits.

Khoron actually already has quite a bit of backstory – at least somewhere in the back of my head – so I do have a pretty specific idea of what I want his model to look like. With that said. there’s a lot I still love about AgnostosTheos’ version (especially the lined face he chose, making Khoron look like a grizzled veteran), but it’s obvious the model doesn’t fit my World Eaters colour scheme, so instead of painting over AT’s paintjob, I thought this would be a good occasion to build an updated 30k version of Khoron. Now I see him as a hard-as-nails veteran of the legion, so I chose an archaic suit of armour for him — plus I had already heard rumours of the new boxed set at that time, so it seemed like a cool idea to give Mk. III a try:

The model was created by combining World Eaters’ and Iron Hands’ parts (I loved the chainmail loincloth on the IH legs, so I just had to use them). The weapons have also swapped hands when compared with AT’s version, in order for the model to mimic Khoron’s eventual Dreadnought ironform. The model has only been tacked together for now, and I think Khoron will be needing some additional gear here and there, but by and large, I am already pretty happy with the new version. So here’s Khoron next to the previous version of the character:


So yeah, that’s it for this week. It goes without saying that I would love to hear any thoughts you might have! And, as always, thanks for looking and stay tuned for more!

Get out of my head, dammit! A closer look at The Burning of Prospero

Posted in 40k, Conversions, Custodes, Pointless ramblings with tags , , , , , , , , , , , , , , on October 26, 2016 by krautscientist

First of all, forgive me for being phenomenally lazy over the last two weeks, dear readers — or rather, I wasn’t really being lazy but rather focusing my attention elsewhere (on the job, as it stands — YAY!). But it’s now time to return to the world of blogging, and what better occasion than to address the very obvious elephant in the room: GW’s second Horus Heresy boxed kit, The Burning of Prospero:

burning-of-prospero-release-1Prospero has been dangled in front of Horus Heresy aficionados’ noses for quite a while now, and now GW performs a fearsome one-two-punch, turning the occasion into its own boxed set with dedicated rules — and lots and lots of delicious new little plastic men. Interestingly enough, the box seems to be continuing some of Betrayal at Calth’s most successful parts (i.e. giving us Horus Heresy Astartes in multi-part plastic) while also shaking up the formula in other respects (making the HQ models far less generic and adding shiny stuff like the Custodian Guard and the Sisters of Silence). So anyway, it has been a while since the last review, so let’s relish this occasion and use it as an excuse to take a closer look at the models as well as the possible conversion opportunities!

Before we begin, however, allow me to point you towards Wudugast’s article regarding The Burning of Prospero as a possible companion piece to this post. I’ve only skimmed his post so far, mostly for fear of ending up stealing some of his ideas and observations, but it seems like he raises some excellent points, and I know I am already looking forward to reading the whole thing, once my own post has gone up 😉

So let us start with the two HQ models that come in the box: Once again, we get one commander for each side. Now while Betrayal at Calth chose the route of actually naming the characters and giving them background while keeping the models themselves generic to the point of blandness, The Burning of Prospero goes the exact opposite way and opens up with one of the 30k and 40k universes’ big names:


Ahzek Ahriman, Chief-Librarian of the Thousand Sons

Now that was quite a surprise, wasn’t it? Ahriman’s definitely the first major 30k character to be given a plastic incarnation, and I think Maxime Pastourel (aka Morbäck) has done a wonderful job with the model: The armour and detailing are very close representations of several pieces of Horus Heresy artwork, giving you the idea that, yes, this is definitely Ahriman! The blank faceplate is a bit of an acquired taste, but in all fairness, it has been part of the art for quite a while now, so it’s definitely an accurate representation. The engravings and symbols on Ahriman’s armour speaks of the Thousand Sons’ dabblings in sorcery while not overcluttering the model. And I really love how the flowing robes lend motion and dynamism to what is otherwise a rather static pose.

Of course with an important character like this, it’s also important to compare the 30k and 40k versions — and at first glance, there is very little resemblance between Maxime’s 30k Ahriman and Jes Goodwin’s classic 40k Ahriman:

40k_ahrimanHowever, upon closer examination, it’s interesting to see how several elements of the 30k model do seem like a shout out to Jes Goodwin’s model: Maxime himself explains in the current issue of WD how the curved crest behin Ahriman’s head was included to mirror the horns curving from the 40k version’s helmet — and a similar thing can be said about his Heka staff, as the curve of its blade seems to subtly echo the curvature of the horns atop 40k Ahriman’s staff.  The stole around Ahriman’s neck also mirrors a similar item on 40k Ahriman, and it’s fun how the wind seems to be blowing in the opposite direction on both models, respectively 😉

Beyond those visual connections, it’s also fun to compare what is different about the models, however, as there seems to be quite a bit of visual storytelling there: 30k Ahriman is all clean lines and lofty ideals, while 40k Ahriman seems like the quintessential, crooked and corrupt Chaos Sorcerer (much as he himself would probably deny any such notions). Looking at both models beautifully illustrates how far the character has fallen! It’ll be interesting to see whether a possible new 40k version of Ahriman manages to keep the same sense of narrative…

So yeah, I think this guy is pretty great! Anything else? I think that fallen Space Wolf on the base is a rather beautiful touch. And that might just be the best casting hand we have seen so far from GW — job’s a good ‘un!



Geigor Fell-Hand of the Space Wolves

Ahriman’s direct opponent for the game is Geigor Fell-Hand of the Space Wolves, and while he’s a beautiful model in his own right, I don’t think he can quite keep up with his Thousand Sons counterpart. First of all, it would have seemed more plausible from a story perspective to include Othere Wyrdmake, seeing how he’s both an already established character AND Ahriman’s nemesis of sorts. But I imagine that would have messed with the game’s premise (sorcery vs. good, honest close combat), so we get a CC monster instead 😉

Now there are many things I like about the model: The artificer armour is definitely a thing of beauty! The shoulder pads are particularly noteworthy, in my opinion: The left one looks deliciously customised while the right one actually shows a Rogue Trader-era style legion badge — brilliant!

In spite of the model’s strong parts, I do have two gripes about Geigor: One, I think the model is too “Space Viking” by a long shot, especially since the Horus Heresy novels (Prospero Burns, in particular) have been doing such a good job so far of selling the wolves as something more interesting than mere generic viking types. And now here comes Geigor, in full Space-Viking regalia — poor guy must not have gotten the memo…

In fairness, I think this problem could be solved in part by making a few minor tweaks and ommissions: That back banner needs to go, if you ask me, and the claw seems a bit over-designed to me.

In fact, that’s my second gripe: I get how the designers wanted this guy to read as a close combat monster, but the combination of a massive lightning claw and a combat knife just seems off to me, somehow, especially in combination with the slightly wonky poses of the arms. I think a pair of claws or a massive sword and knife would have been excellent options, respectively, but the setup we are getting here just seems like a bit of a compromise. I remember that this guy was rumoured to be Bjorn the Fell-Handed, back when the first rumours of the boxed set surfaced, and his equipment would have made lots of sense in that light. But it seems like GW chickened out and turned him into yet another super-important character that we have never heard about — and in that case, a different combination of weapons would have worked better, if you ask me.

Don’t get me wrong, though: Geigor’s still a beautiful model that should work well both in 30k and 40k armies. He’s just not as good as Ahriman 😉


Tartaros Terminators

burning-of-prospero-release-7Getting a full squad of plastic multi-part Cataphractii out of the deal was one of the most pleasant surprises about Betrayal at Calth — and now the new boxed set follows suit and gives us a squad of the other iconic heresy-era pattern of Terminator armour. And it seems like GW’s sculptors have once again done a good job of recreating the design in plastic, at least where the amount of detail is concerned.

Now I have to admit I am not a big fan of the Tartaros pattern, but that’s just me. Even so, I cannot help wondering whether these are actually a bit clunkier and more angular than their resin cousins. In any case, I do think the models end up looking a bit silly if the shoulder pads are placed too low, however. Just check out this guy:

Beyond those observations, it looks like the kit comes with just as much customisation as the Cataphractii — and we even get some choom out of the deal! 😉 I also like the extra detail on the sergeant’s armour, which is something I would have loved to see on the Cataphractii as well!

All in all, this is another rock solid plastic rendition of heresy armour, and I imagine many people will be really happy with these guys! My lack of appreciation for the general design of the armour means I am not perfectly sold — but I do think the plastic Tartaros Terminators provide some excellent conversion fodder. But we’ll be getting to that in a minute…


Tactical Marines in Mk. III “Iron” armour


Where the regular Astartes are concerned, the inclusion of plastic Mk. III armour is actually the most exciting part of the boxed set for me! Iron armour is possibly my favourite heresy era armour mark — even moreso than Mk. IV. There’s just something about the very archaic look of the armour and the added mass that’s immensely appealing to me for some reason — maybe it’s the fact that the heavyset Mk. III armour captures the massive, archaic feeling of the classic Wayne England Horus Heresy artwork like nothing else?

Anyway, these guys look great as a squad, and it’s cool that they are getting the whole tactical squad treatment (with all the options that entails) once more. Granted, though: If you are not into Space Marines, then this is just the umpteenth tactical squad — but then I guess you wouldn’t exactly be this boxed set’s chief target demographic, either 😉

While the basic options and additional weapons are just like what we got with the Betrayal at Calth Mk. IV Marines, there are some additional tweaks that I appreciate: The models come with yet another bolter design (the Phobos pattern) that’s arguably a great fit for the archaic armour and makes for greater visual variety. And we get some chain swords for the Marines to wear at their hips, whoch is nice — and arguably a bit cooler than the somewhat bland combat knives. Maybe next time, we can get some actual chain sword arms, though? Thank you very much! 😉


The armour design itself seems to have been tweaked ever so slightly during its transition to plastic: The back of the backpack seems to have streamlined a bit, for once. There have been some tweaks to the helmet design. The shape seems ever so slightly different, especially towards the back of the helmet. And the main difference is that the eyes – formerly just eye holes, really – have been turned into actual helmet lenses that can be painted. This definitely makes sense, but the look it creates needs some getting used to.

burning-of-prospero-release-12On the other hands, GW sweetens the deal by giving us several subtly different helmet designs, which is definitely appreciated.

Much as I love the design of the armour, however, my earlier criticism from the Betrayal at Calth release applies once more: Why not include some CC weapon arms (which would have made even more sense given the “physical power vs. sorcery” vibe of the whole game) and leave those to FW upgrade kits? I would have loved to finally see some close combat arms on a wider scale, especially with a kit that is otherwise so big on options and customisability.

Apart from this one piece of criticism, however, the Mk. III Marines are one of my favourite parts of the boxed set, and I can hardly wait to get my hands on them!


Custodian Guard & Sisters of Silence

Right, if you had told me one year ago that we would be seeing plastic Custodes and Sisters of Silence in an upcoming Horus Heresy boxed set, I would probably have laughed long and hard and called you a wishlister of the highest order. And yet, here they are. Of course their inclusion makes sense from a background perspective — seriously, though: I would rather have expected them to be releaed as resin models.

Of course the recently released Deathwatch Watch Captain served as a fair warning, what with wielding a Guardian Spear and all — I was actually going to suggest using him as the base for a Custodes conversion. Clever, GW, very clever 😉

The Custodes in particular have long been a bit of a holy grail for many hobbyists (myself included), and the attempt to recreate them in model for has spawned many awesome armies — with Dave Taylor’s seminal Custodes army being first among them, of course. All the more reason, then, to take a close look at the models:


Custodian Guard

“Oh, right, now I understand: That’s what GW kept doing all those golden Age of Sigmar dudes for: They were merely test runs for the inception of plastic Custodes…” 😉

And, funnily enough, just when we thought we couldn’t stand any more huge golden dudes, GW gives us plastic Custodians — I wonder whether or not the irony behind it all was intended 😉

In spite of never appearing in model form so far, the Custodes have a fairly well-documented history, with quite a few depictions in the Horus Heresy art. Many of the most iconic illustrations featuring the Emperor’s bodyguard were part of the Horus Heresy trading card game and subsequently appeared in the collected Horus Heresy artbooks. Such as this piece:

I think it’s really astonishing how much of the visual splendour of the Custodian armour appearing in the image above has been faithfully reproduced on the actual models, from the iconic helmet design to the small details of the armour:

burning-of-prospero-release-15I also really like how the armour seems decidedly unlike standard Astartes power armour, thanks to its very different lines, integrated backpack/reactor etc.

What’s more, you may not like those massively clunky bolt-pistol swords, internet, but if nothing else, there’s a precedent for them in the classic HH artwork, and they are just as clunky there:

The shout outs to the artwork don’t stop there, however: In his aforementioned post, Wudugast points out how much the bare head included with the kit resembles the various depictions of Constantin Valdor, Captain-General of the Legio Custodes:


All of this makes it seem like GW’s designers have really gone above and beyond in the attempt to do these guys justice and make them resemble the classic artwork as much as possible.

Even so, I will say that – beyond the sheer surprise of these guys being featured as part of a boxed set, and in plastic, no less – I did have to warm to the Custodes models for a number of reasons:

First up, they seemed so big and clunky to me: Sure, so many of the elements from the classic artwork have been expertly reproduced in model form, including the contoured armour that separates them from regular Astartes, but they still felt so massive to me at first glance, when some of the old artwork rather suggested something more lithe and elegant:

Of course John Blanche’s style is always rather open to interpretation, and the actual models usually end up looking fairly different, but there are also different pieces of art that have the Custodians look powerful, but in a rather elegant way. Just check out the guys on the far right in the picture below:

The actual models seem incredibly massive, however. Especially so in certain configurations:

burning-of-prospero-release-16At the same time, I have come to like the bigger scale when compared to regular Astartes: Sure, it seems a bit strange at first, but the Custodians really should be between an Astartes and a Primarch in size — just imagine how stupid they would look surrounding the Emperor otherwise 😉

Still, the added mass takes some getting used to. But even as I write this, I can feel myself liking the models more and more. So I don’t think it’s much of an issue.

The other gripe I have doesn’t seem quite as substantial, admittedly, but it just keeps bothering me: Why are the Custodes models lacking any kind of robes or capes? This feels like a pretty baffling design choice on GW’s part, because if you look at the various pieces of artwork above, the crimson robes and capes seem as emblematic of the Custodes as their Guardian spears and their iconic helmets. Yet they are completely missing on the models, not even showing up on the Shield-Captain.

Now I do realise that this probably has something to do with technical issues and/or the way the models are assembled — but come on, these models are so spectacularly detailed, and you have gone out of your way to feature elements from the artwork. So how hard could it have been to add some (optional) capes on the sprue?

To add insult to injury, the Custodian appearing on the pictures of FW’s new antigrav tank even sports an added cape:

Looks like I’ll have to source some plastic capes, then — any suggestions? 😉

Of course having Custodes available in plastic also carries a bit of a bittersweet taste for me: After all, I happily kitbashed together a small Custodes army a couple of years ago, and I think I had a pretty good recipe as well:

Custodes (2b)
Custodian Squad (2)

Custodes army Teaser Shot
And these guys have now obviously been rendered rather irrelevant by the new models — bugger! 😉 I really only have myself to blame, though, as my last models for the army were painted back in 2013 — I should have been faster!

All in all, these guys have grown on me quite a bit — and to actually see them as what looks like a multi-part plastic kit still seems kind of unreal to me. What’s more, the amount of detail on the various parts of the kit is really rather outstanding, and I imagine playing around with the bitz should be quite a bit of fun. Sure, the swords are too big (even if they are accurate), but at least we get a full set of Guardian Spears, so that’s not much of a problem. It really is a shame about those missing capes, though…


Sisters of Silence

Where the Custodes depart from the artwork in some rather surprising ways, the Sisters of Silence seem like a perfect representation of the various pieces of artwork from the Horus Heresy artbooks: The design of the armour, the iconic weapon and facemasks, and the weapons wielded by the various squads in the artwork: all accounted for.

In addition to this, it’s always a treat to see some additional female models, and the Sisters of Silence are an especially welcome breath of fresh air in between all those bulky killing machines in the boxed set!

Another thing I really like about the models is that they feature all of the weapon loadouts we have seen in the art so far, allowing for swords as well as bolters, which is a very nice option to have (and also adds even more possible conversion parts).

Oh, and that Sister Superior ist just a stunning model — it’s going to take all of my (almost nonexistent) willpower to resist the temptation to convert her into an Inquisitrix…

Incidentally, a squad of kitbashed Sisters of Silence were part of my Custodes project as well, although I’d argue they are still close enough to the new models to actually still work once painted:

SoS (15)

Do I see any negative points about the Sisters? I think some of the hair looks ever so slightly unnatural — but that’s not a huge problem and should be easy enough to sort out. In closing, let me just state the obvious, though: If GW can do these, they can do plastic Sisters of Battle. Just sayin’…


conversion options:

So much for the models, but what about possible conversions? I think the boxed set provides us with lots and lots of promising bitz and opportunities. Let me just outline some initial ideas for you:


I think the model could easily be turned into your own, customised Thousand Sons Librarian or even Praetor, for that matter: Just a head and/or an arm swap, and you are there. By the same token, he would work really well as a Chaos Space Marine Sorcerer in 40k: His armour is just ornate enough to work, and adding some spikes, trophies and chaotic symbols as well as a suitably chaotic staff and head shouldn’t be a huge challenge.

Geigor Fell-Hand
Like Ahriman, it should be easy enough to turn him into a custom Praetor with a new head, new arms or what have you. It’s also important to point out that the thing I consider the model’s biggest weakness (his over-the-top Space Wolfiness) is what makes him a great fit for a 40k Space Wolves army.
Given the amount of detail on his armour, I think it would be pretty difficult to convert him into a member of another legion. However, I might eventually try to turn him into a member of my Traitor Wolves. We’ll see…

Tartaros Terminators

I am pretty sure we can look forward to all kinds of crazy kitbashing involving these guys, especially if it comes to recombining existing parts to create new (or customised) marks of Terminator armour.
Possibly the most interesting thing about the models, however, is how they provide excellent parts for true-scale conversions! My first true-scale Marine, Praetor Janus Auriga, uses Tartaros legs, and they work really well for true-scale Marines because there are few visual cues that actually make them read as Terminator legs, making for very uncomplicated conversions. By the same token, I have seen some very convincing true-scale conversions making use of Tartaros torso pieces, so I definitely think that true-scalers across the blogosphere will appreciate these new toys. For instance, I can hardly wait for Apologist to get his hands on these guys… 😉

Mk III Marines

It’s easy to imagine how versatile a tool these will become for Space Marine players — after all, they should work great in both 30k and 40k, and it’s easy enough to mix and match with all of those plastic parts now available. This is great because it allows for extra flavour in your Space Marine army, regardless of which legion you are playing. It also means that you can now create a plastic Horus Heresy Astartes army without having to rely on a single armour mark for most of the models. What’s more, mixing different parts will lead to a more improvised, ragtag appearance that would be a great fit for specific legions (yes, World Eaters, I am looking at you! 😉 )

I also love the fact that the Mk. III Marines would arguably work really well for Chaos Space Marines as well: The added detail and mass make them look just archaic and sinister enough, and some legions immediately come to mind —  such as the Death Guard, Iron Warriors or World Eaters.

Man, I really want to get started on those guys…

Custodian Guard

Well, these would be great fíf you wanted to build a suitably massive Inquisitor, of course, but I am pretty certain that we are going to start seeing actual Custodians appear in INQ28 and Necromunda games, especially if they happen to be set on Terra 😉
Beyond that, I am already considering using leftover Custodian parts to turn some of those Sigmarines into yet more Custodians — this should be interesting! And finally, those very same leftover parts should make for excellent conversion fodder for Space Marines and Inquisitorial retinues alike — those shields alone are almost worth it! Invictarii, Breachers or Honour Guard, anyone…?

Sisters of Silence

I predict a bright future for the Sisters of Silence models, especially among converters and the INQ28 crowd: Additional female models are always a much-appreciated resource, and it looks like the new sisters could be the legitimate heirs to the female Dark Eldar Kabalite Warriors and Wyches when it comes to building female assassins, death cultists and Inquisitorial operatives. Beyond that, like I said, the Sister Superior looks like she would make a teriffic base model for an Inquisitrix. And if you have already given up hope that GW will ever release plastic Sisters of Battle, then these girls might be your final way out 😉


So what’s the final verdict? Back when Betrayal af Calth was realised, my main criticism was the generic look of the models: I realised that this choice arguably ensured that the box would have a wide appeal to more people, but the lack of character still felt like a problem, especially with regard to the HQ models. The Burning of Prospero addresses this criticism, giving us squads that are once again generic enough so as to be useful to everyone, while imbuing the HQ characters with a lot of character. And then they added some of the most eagerly awaited Horus Heresy troop types on top of it all in a move that seems to have been plucked from the big all time wish-list in the back of my head — well played, GW, well played indeed!

With regard to the Horus Heresy setting at large, I think the writing’s definitely on the wall now: GW seemingly wants to move the Astartes squads to plastic and leave the special upgrade kits and characters to Forgeworld. At the same time, we have now seen the first important character in plastic, and we have proof that the Daemon-Primarchs (or at least one of them) will be produced as plastic kits. So I think we can expect a sizeable part of the future Horus Heresy output to be produced by GW proper (and in plastic) at this point, and I applaud that choice. I realise that not everyone is quite as enthusiastic as me about this change, since many hobbyists seem to fear a sellout of the setting (to that I say: No shit, Sherlock 😉 ) or a decline in quality. But if the boxed sets are anything to go by, I do not think there’s that much to fear.

If anything, it’ll be interesting to see what comes next: Additional armour marks in plastic? More named characters as clamshell versions? And let’s not forget the Custodes and Sisters of Silence: I feel myself being drawn back to that one massive piece of classic artwork time and time again:


This hints at additional troop types, such as Terminators and jetbikes, to name just a few. And with the models we have now so clearly inspired by classic artwork, the obvious question is: What if this is just the beginning…?

Wishlisting aside, though: What we have here is another very tempting Horus Heresy starter box. And how does the new box compare to Betrayal at Calth? I think that, between the two, Betrayal at Calth is still arguably the better “starter kit”: The contents are a bit less exciting, but also slightly more useful. That being said, the new box still seems like a more refined sequel: If Betrayal of Calth was the teriffic proof of concept, The Burning of Prospero is GW’s pièce de résistance — at least for now…


So what’s your take on the new boxed set? What do you like or hate about the new models? And do you have any conversion ideas you would like to share? I would love to hear from you in the comments section!

And, as always, thanks for looking and stay tuned for more!

The State of the Hunt — Week 37

Posted in 40k, Chaos, Conversions, Inq28, Inquisitor, paintjob, Pointless ramblings, state of the hunt, WIP, World Eaters with tags , , , , , , , , , , , , , , , , , , , , , , , , on September 14, 2016 by krautscientist

Hey everyone,

I think I’ll be turning “State of the Hunt” into a semi-regular feature to show you smaller stuff I am currently working on and to discuss various subjects that maybe wouldn’t warrant a post of their own but are still important to me. So today let’s look at a collection of Khornate Miscellany:


I. A Champion Reborn…

What else could be the first item of interest for today, if not the release of the new plastic version of Khârn the Betrayer? There have been rumours about new versions of the iconic Chaos characters for a rather long time now, and now here’s Khârn, hopefully ushering in a slew of releases (one can always dream…):

plastic-kharn-the-betrayer-release-1Now before we take a look at the new model, allow me to mention that I have written at lenght about Khârn and his various incarnations in the art, the lore and in model form, so you may consider the following thoughts a late addendum to the respective post from 2014.

So as I’ve said in the aforementioned post, I really consider the original Khârn the Betrayer a model for the ages (but then that’s Jes Goodwin for you). I would also argue that the old model has managed to age far more gracefully than most special characters from 2nd edition. For instance, while Abaddon just looks rather puny next to the much bigger modern models in Terminator armour, Khârn still seems imposing, even twenty+ years later. He’s also a thoroughly iconic piece, debuting (or at least refining) so many of the visual elements that define the look of the World Eaters and the Khorne Berzerkers in particular to this day: the chains, the skull motifs, the bare arm. And, of course, the iconic crested helmet.

Now updating such an iconic model is not without its dangers, and when a new plastic version of Eldrad Ulthran was recently released, I felt it lacked the original model’s iconic quality. So what about Khârn then?

When we look at both versions side by side, I think the one thing we can all agree on is that the new version still definitely reads as Khârn — and that alone is no small feat! In my opinion, the best decision of the new model was to basically stick to the classic design of the helmet and only make very minor tweaks to it. Back when I converted my own true scale version of Khârn, I quickly found out that no model will look like Khârn unless that particular helmet design enters the equation, and by the same token, Khârn’s helmet is the one helmet that isn’t easy to kitbash by using available bits. So basically leaving the helmet alone was a fantastic – and ultimately crucial – design decision, in my opinion!

All of the other classic elements are there as well: The bare right arm (after Forgeworld’s Khârn version switched the axe to the other arm, it’s interesting to see how GW chose to stick with the layout of the 90s version), the chains wrapped around it, the various skull motifs adorning the armour, and countless other little touches. All of this sells the model as Khârn without a doubt!

Of course things only really get interesting when one considers the parts that have been changed when compared to the original model: First of all, Khârn seems to have bulked up quite a bit, to account for about two decades of scale creep. And he wears it really well, as a look at some additional angles reveals:

Another really cool part is how GW has managed to bring the armour in line with the very baroque look of the Dark Vengeance Chosen or the plastic Raptors/Warp Talons without resorting to adding any wanton mutations: I think this basically works as the perfect template for new chaos models: Give us more jagged and baroque looking armour that clearly differs from the smooth contours of loyalist Astartes armour, but focus the gribbly stuff on optional bits and upgrades. That way, everyone would be happy, right? 😉

Anyway, the redesign achieves the trick of making the new Khârn look right at home next to both vintage and modern chaos models, which is great, and arguably my favourite part about the model!

Then there’s the pose, of course: Where Khârn’s pose used to be very static (and powerful), he is now running forward like mad — which, admittedly, is a pretty great fit for the character. Now to be perfectly honest with you, I wouldn’t have minded a static pose on the new Khârn, but then most people seem to have taken issue with it, and the new running pose also creates a nice resemblance with Forgeworld’s Khârn model, albeit mirrored:

Of course the problem with highly dynamic running poses is that the model in question might end up looking as though it were tripping over its own feet, and the new Khârn is getting a bit of flak over possibly tripping over those dangling skulls — but seriously, I am not really seeing it. In my opinion, the running pose is more believable than the slightly awkward pose of Forgeworld’s version. And if you take a look at the 360 degrees view of the new model over at the GW website, there’s a depth and three-dimensionality to the model now that is hard not to admire.

So do I love everything about the model? No, I do have my gripes, of course. So let’s take a look at the bad parts:

Those weighed down chains dangling from Khârn’s left wrist are easily my least favourite part of the model: They just seem too clunky and kill the flow of the model. I think I would have gone with something a bit more subtle, and my first tweak to the model would be to take off those chains or pare them back a bit.

It also seems to me that the ripped muscles on Khârn’s bare arm look slightly too angular and sculptural, although that could always come down to the paintjob. I will say, however, that the pose is maybe slightly too stylised for its own good, with Khârn looking more like the statue of a running guy that an actual running guy, if that makes any sense.

And my third gripe with the model is the design of Gorechild, Khârn’s axe:

Considered on its own, it’s a very cool and vicious looking Khornate axe — and look, they’ve even redesigned the teeth to more closely resemble the Mica-Dragon teeth from the lore. So the design is pretty cool, but by changing it, the entire sense of visual continuity goes out of the window. Because one thing I have always loved is that, regardless of whether you were looking at Forgeworld’s Angron, Forgeworld’s 30k Khârn or the 40k Khârn model, they were all definitely wielding the same axe, and that sense of continuity is now lost. Now you could argue that the axe had probably undergone some warping and mutation over the 10,000 years of the Long War, but after so much work on the sculptor’s part has gone into ensuring that the axe looks exactly the same on all three models, this change almost seems like an oversight now, and while the axe itself looks cool enough, that really, really bothers me (because I’m an obsessive weirdo like that 😉 ).

I have one very minor gripe: The backpack seems strangely narrow to me, but I’ll reserve judgement until I have seen the model firsthand.

Interestingly enough, a closer look at the sprue reveals that the model might actually be pretty conversion-friendly:

For one, it should be pretty easy to return the new model to a more static standing pose, should you want to: Just some careful cutting and maybe a set of DV Chosen legs, and Bob’s your uncle! Those bothersome chains should be easy enough to leave off or tweak as well, seeing how they come as a separate part. And I guess one could even replace Gorechild’s blade, if one were that way inclined.
The fact that the plasma pistol arm, axe and backpack could easily be used as conversion bits is a definite plus as well!

So, what’s the final verdict?

All in all, I am pretty happy with the new Khârn! Where the plastic version of Eldrad failed to capture the coolness and iconic nature of the original model, it feels like Khârn is definitely a step into the right direction! While I do have a couple of minor complaints about the model, the new version also brings enough to the table to be a strong model in its own right. Maybe it’s not quite as timeless a classic as the original Khârn, but that also seems impossible to ascertain right now, especially given the fact that I’ve grown up with the original 2nd edition model. Anyway, I like this guy! Where Eldrad was a bit of a disappointment, Khârn is – at the very least – a modest success.

At the same time,  I still think my custom, true scale Khârn from 2014 manages to hold up:

At the same time, I can pretty much guarantee that I’ll also be purchasing the new version: I think it’s a pretty awesome new interpretation of an iconic character, and the parts I don’t like about the model should be easy enough to tweak. I’ll keep you posted 😉



II. Travelers from afar…

My hobby life has been massively improved by other people’s generosity for a rather long time now, and I’ve been fortunate enough to receive two more incredible additions for my collection from fellow hobbyists recently.

First came BrotherJim, who recently completed a rather stunning Nurglite CSM force as part of the ETL V event: I provided some feedback to him, and he actually built me a model and sent it over to me by way of thanks — how awesome is that? Now the really cool thing about BrotherJim’s conversions is how much they are inspired by Adrian Smith’s rather iconic art from the 3.5 Codex Chaos Space Marines, and how BrotherJim is pretty much the first person to have managed to give his models the same, massive, lumbering look. This leads to a very distinctive style, and I was really happy the day one of his creations arrived allll the way from Australia to bolster the forces of Khorne’s Eternal Hunt:

Conversion by BrotherJim

Conversion by BrotherJim

Note the amount of gear and the imposing backpack, both trademarks of BrotherJim’s style. Now I was really happy with the model, but wanted to make one small alteration – a different head – mostly because that particular berzerker head already appears on more than one model in my army, and I felt this guy deserved something more original. So I spliced together a suitably ornate helmet, and here’s the new Huntmaster soon to be part of the 4th assault company:

Model converted by BrotherJim

Model converted by BrotherJim


Model converted by BrotherJim

Model converted by BrotherJim


Model converted by BrotherJim

Model converted by BrotherJim


Model converted by BrotherJim

Model converted by BrotherJim


Model converted by BrotherJim

Model converted by BrotherJim

Just get a load of the amount of weapons on this guy! 🙂

Anyway, thanks again to BrotherJim for this amazing gift! And make sure to check out his excellent work on a growing chaos collection here.

But wait, there’s more: When I came home yesterday, the cutest little package had arrived from the UK. Inside I found this wonderfully sinister and bloodied champion of the War God built and painted by none other than spectacularly talented Terrain-Overlord extraordinaire Neil101 of Opus Maius’ fame:

Model built and painted by Neil101

Model built and painted by Neil101


Model built and painted by Neil101

Model built and painted by Neil101


Model built and painted by Neil101

Model built and painted by Neil101

Now I was already aware that Neil had built this model for me a while ago, but the fact that he also chose to paint it in his trademark style was a wonderful surprise indeed! The result is something far more painterly and visceral than anything I could have come up with, and I am really in love with this guy right now. And that wasn’t all, because accompanying the Khornate champion came a wonderfully macabre “Bucket o’ Blood” (followers of Khorne never leave home without it!):

Model built and painted by Neil101

Model built and painted by Neil101

As is usually the case with Neil’s work, there’s a wonderfully macabre and demented nature to the whole affair, calling to mind both the infamous Yggdrassilliumme as well as the kind of characters you would see in the golden days of Realm of Chaos. And while I am already hard at work figuring out a suitable angle for this guy as a part of the Velsen Sector (he’ll be a member of the so-called “Duelists”, an insidious Khornate lodge operating in the sector), Neil was also kind enough to provide his own little vignette of background:

Models built and painted by Neil101

Models built and painted by Neil101


Coal black eyes kindled the embers of hate, as the headsman daubed his breastplate with the aged ichor of his enemies. His skull face plate chafed at the nape of his neck, the fitting too tight for comfort.

So much he had given, but the Blood God’s bucket had a hole. Never enough, always more.

The unsaturated hunger for power, for glory, always gnawed at his soul. Like the itch of his helm, the one he couldn’t scratch…reminding him that his work was never done. His bucket never full.


Anyway, thanks to Neil for the fantastic model! Job’s a good ‘un, mate! 🙂


III. Twenty years of bloodshed…

I myself have not been idle either, even though I felt I needed something small and fun to unwind after my recent, rather massive Daemon-Primarch-related shenanigans…

But the right opportunity did present itself, fortunately enough! Back when I showed you this OOP mid-90s Bloodletter…

Old Skool Bloodletter (2)
…fellow hobbyist AMaximus offered to send over some old metal Bloodletters of his own. Now the models he offered me were a slightly never incarnation, released around the turn of the century (teehee), between the mid-90s design you see above and the modern plastic Bloodletters. I had never been a huge fan of those particular models, feeling they didn’t really bring anything new to the table, but there’s always time for a little fun, so Andrew and I worked out a small bitz swap, and I got my hands on another Bloodletter version.

My eye was instantly drawn to one of the models that was missing his two-handed axe, and I decided to paint him right away and add a small tweak or two while I was at it. So here’s the mostly finished model (still missing its base):

Like I said, the standard armament for this model would have been a two-handed axe, but I decided to replace it with one of the modern plastic Hellblades (once again, I might add). And I actually think the model is improved by the change! I also had to replace the left hand, and a severed head seemed like a logical choice. It has been pointed out to me – and correctly so – that the head seems to be the victim of some wonky physics, but I think we can just consider this a match for the stock model’s inherent clunkiness and move on, eh? 😉

Seriously, though, this guy has really grown on me! This particular incarnation of the Bloodletters turned out to be a bit of an evolutionary dead end, and from a time of occasionally strange and slightly uneven releases on GW’s part, no less, but I think the model works pretty well with my established daemon recipe in place 😉

And while I was at it, I also painted one of the modern plastic Bloodletters in the exact same way:

And, once again, I am pretty happy with the result — take note that this model still makes used of the slightly tweaked skin recipe taken from Duncan Rhodes’ Bloodthirster tutorial!

Ultimately, the guy above will be joined by a full unit of Bloodletters. Until then, I have a nice little comparison of Bloodletter models from the last twenty years:

I should probably paint one of the spindly, serpentine first edition Bloodletters to complete the set, but I really don’t like that particular version of the daemon, so this is not really a priority project at the moment. If someone wants to get rid of an old Bloodletter, though, I am always open to suggestions… 😉

On a related note, AMaximus was also awesome enough to include a pretty old vintage Bloodthirster head in his bitz drop:

Now what am I going to do with this lovely face…?


IV. Out of the woods, at last…

Now this last subject has nothing whatsoever to do with cutting up little plastic men, but I am still very happy to inform you guys that my time as an unemployed slacker is finally at an end: Starting October, I will finally have gainful employment once more! Yeehaw!

Now it’ll only be for a limited amount of time so far, but it sure feels good to be back in business! And while this could mean less hobby time in the immediate future, my sigh of relief when I learned the news could still have extinguished a raging bonfire. Work for the Work god! 😉


So anyway, so much for this latest news roundup. It goes without saying that I would love to hear any feedback you might have! And, as always, thanks for looking and stay tuned for more!

Bringing a boltgun to a masked-ball — a closer look at Death Masque

Posted in 40k, Conversions, Inq28, Inquisitor, Pointless ramblings with tags , , , , , , , , , , , , , , , on August 11, 2016 by krautscientist

Hey everyone, it has been quite some time since the last review here on the blog, because for what is probably the first time in my hobby life, I am productive enough to keep showing you finished models instead of talking about releases. Go me! 😉

At the same time, however, the backlog of released stuff I want to talk about keeps building up, so the recent release of Death Masque seemed like a good excuse to dip my toes into this particular pool again (I also want to discuss Silver Tower in more detail one of these days, probably as the last hobbyist in the world, but that will have to wait until I finally get my act together and write the rather comprehensive post I know the game deserves).

Death Masque release (1)
Anyway, here we are with a new boxed game, and it’s centered around the Deathwatch once more. Which is pretty cool, because the Deathwatch has always been a bit of a red-haired stepchild, at least when it comes to the Inquisitorial Ordos’ Chambers Militant: The Ordo Malleus’ Grey Knights have now enjoyed full faction status for years, and the Sisters of Battle, allied by ancient decree to the Ordo Hereticus…well, let’s not get into the whole drama and tragic release history surrounding them right now — suffice to say that they at least did form a complete army at one point.

The Deathwatch, on the other hand, was always restricted to a couple of conversion bitz, so if you wanted to run a Deathwatch killteam or, god forbid, an entire army, some OOP metal conversion bitz and a couple of plastic shoulder pads were all the material at your disposal.

All of this has changed with Deathwatch:Overkill, which provided us with some pretty excellent characters that already defined a general outline of what the modern Deathwatch could look like. And now we get another boxed game — this time chock-full of actual multi part kits and delicious conversion fodder! We also get a Deathwatch Codex to boot, but as my perspective is chiefly that of a converter, let’s focus on the models and discuss their strenghts and flaws as well as possible conversion ideas:


Team Xenos

The Xenos are definitely getting the short end of the stick in this box — at least in terms of new sculpts: All of the models (except one, but we’ll be getting to that in a minute) are the plastic Harlequin kits that were released a while back. They are still pretty cool, of course, but there’s really no need to talk about those models again — all my thoughts on the plastic Harlequin models can be found here, in case you’re interested.

But like I said, there’s one notable exception. This guy:


Eldrad Ulthran, Farseer of Ulthwé

Death Masque release (2)
Well, quite a surprise, this one! I don’t think many people were expecting a plastic version of this classic 2nd edition character, seeing how Eldrad seemed to have died a typical Disney villain death at the tail end of the Eye of Terror campaign all those years ago, but mostly because the original Jes Goodwin sculpt is certainly one of the most iconic 40k models:

Death Masque release (3)
Confession time: I consider this one of the best 40k models ever, period. Easily one of my top five if one considers the whole 40k catalogue, and certainly one of the models you should show somebody if you were trying to explain to them what 40k is. Sure, the model is slightly two-dimensional, being very much a product of its time, but the amount of detailing, strong triangular composition and perfect pose make this model one for the ages, in my opinion. And now they have chosen to update this piece. Ho hum…

GW’s respect for the original Eldrad model shows in that they basically chose to keep almost every part of the original model: The staff and sword are virtually identical, as are most of the clothes and various doodads dangling from Eldrad’s belt and arms. The helm is also really similar, although I really hate the fact that Eldrad now sports one of those silly “pharao beards” that have been the bane of every Farseer design for quite a while now.

The pose is also very similar to the original, but while adding a bit of depth to the original sculpt, it also ends up looking ever so slightly less iconic. Now maybe this is just nostalgia getting the better of me, but for some reason the new Eldrad, for all his excellent detail, doesn’t seem to be quite as tightly composed as the original piece:

Eldrad comparison
While some will certainly welcome the slightly airier pose and sense of depth and motion to the model, but I just cannot get over how brilliant the original is. Nothing is better proof of this than the fact that the new Eldrad instantly becomes far inferior if you drop the sword arm and use the alternate, “casting” hand for him:

Death Masque release (4)
Of course it’s a huge boon that the new model is plastic, so it lends itself to converting much better than the old metal model, allowing for using it as the base as a customised Farseer conversion (or for smaller tweaks like, for instance, getting rid of that beard…):

Death Masque release (5)
When all is said and done, it’s a very nice and fitting model when taken on its own merits. When compared to its legendary predecessor, however, I have to admit that it doesn’t quite hold up: If I were to build the new plastic Eldrad, I would do my darnedest to make him look as much as the original metal model as possible by tweaking the pose (and by GETTING RID OF THAT BEARD!), and I think that says al lot about which version is the superior one…

I wonder what this means for the (rumoured) plastic update of Khârn the Betrayer…?


Team Deathwatch

It takes no rocket scientist to figure out that the Deathwatch are the more appealing faction in this particular set, mostly because there’s more original content for them. But even so, the Deathwatch side of things also makes heavy use of pre-existing kits: It looks like you basically get one Vanguard and Venerable Dreadnought kit and then the new Deathwatch Veteran sprue to build five Veterans and use the remaining bitz to spice up the other models to your heart’s content. Regarding the base kits, all of them are excellent kits, whether you’re starting a new Astartes force or adding to an existing one. Some detailed thoughts of on the Vanguard kit can be found here.

But yeah, beyond those kits, there’s the new Deathwatch Veteran sprue — and quite a sprue it is:

Death Masque release (9)
Looks like we are getting lots of weapons and decoration, but also a dedicated set of bodies and legs, which is very nice! And here’s what the bitz from the sprue will look like when used to create a squad of Deathwatch Veterans:

Death Masque release (10)
The inclusion of already establised visual elements, such as the Inquisition symbols, shoulder pads covered in scripture and special bolters, was a given, of course. What I really like, however, is how the main point of this new sprue seems to be to give the Deathwatch its own visual identity: Deathwatch Marines basically used to be standard Marines with a special bolter and one slightly more interesting shoulder pad. The new parts, however, really create a new look for them:

Death Masque release (12)
Their armour has a more streamlined and modern look to it (is that an Mk8 breastplate, I wonder?), which befits an Inquisitorial special force. If anything they have a sleek “Spec Ops” looks that is rendered even stronger by their armour being black.

It’s very interesting to see how they differ from their obvious counterparts, the Grey Knights: The Grey Knights look like, well, Knights: very ornamental and medieval. The Deathwatch, on the other hand, look like a particularly bad-ass black ops team from your favourite 90s military shooter, thrown into a blender and turned up to eleven — which also happens to make them look far more believably like an Inquisitorial sub-organisation now!

In addition to the sleek new armour designs, the sprue also seems to be featuring some of the Ordo Xenos’ more…esoteric gear, such as the sword on the squad leader:

Death Masque release (11)
Seems like we’ve been stealing some tech from the Necrons, eh? 😉 Now while this particular weapon seems a bit hit or miss to me, I still think it’s neat that some of the equipment seems to be both more esoteric and seemingly inspired by Xenos tech.

For those of you who want boisterous and ostentatious instead of sneaky and subdued, however, the good news is that the new Deathwatch bitz seem to allow for that option as well:

Death Masque release (13)
Ah, what would we be without huge hammers and crazily ornate boarding shields, eh? They are looking awesome, though!

But whatever happened to the handle on this poor fellow’s hammer…?

Death Masque release (14)There’s also a collection of shoulder pads bearing quite a plethora of different chapter symbols on the sprue, which should really help to make any given Deathwatch force look like it has actually been assembled from Astartes hailing from many different chapters. And the fact that we don’t just get yet more heraldic elements of the “big” chapters like the Ultramarines, Dark Angels or Blood Angels, but rather a collection of more obscure iconography, is both a great shout out to the wider 40k lore and a great modeling opportunity!

And finally, the bitz on the sprue can also be used to convert Dreadnoughts into a Deathwatch variant:

Death Masque release (15)All in all, the new sprue seems like a deliciously versatile new toy, and I can see it becoming really popular, both with 40k players and the INQ28 crowd alike! For instance, Commissar Molotov, being both the Godfather of INQ28 and quite the Deathwatch fiend, will probably find much to like about the new sprue 😉


Watch-Captain Artemis

Death Masque release (6)
Well, this was another really excellent surprise: Whom do we get as the Deathwatch commander but a veteran of 54mm Inquisitor? For those of you who haven’t been into this hobby for years and years, Artemis will merely seem like a cool enough Deathwatch model. But if you remember the old 54mm Inquisitor line of models, you will also remember Artemis, arguably one of the most spectacular models at the bigger scale. And just check out this comparison to see how closely the new model matches the earlier incarnation:

For the sake of the comparison, both models are displayed at the same size, when they are really anything but...

For the sake of the comparison, both models are displayed at the same size, when they are really anything but…

It’s really crazy how GW’s sculptors have managed to incorporate almost all of the visual elements from the 54mm Artemis! Especially if you consider that one of the huge draws of the original Inquisitor models was how 28mm plastic couldn’t hope to capture the same amount of detail — I think it’s a testament to the quality of GW’s modern plastics that almost all of the detail has been retained at about half the size!

There are some smaller differences: Artemis seems to have done rather well for himself since we last saw him , earning the right to wear a snazzy cape. His Deathwatch boltgun has also been exchanged with an actual combi-weapon, and both his sword and his backpack have received some additional bling. I kinda miss the Crux Terminatus necklace, though, as it provided a nice extra bit of dynamism to the model. And I think I’d add a purity seal to the front of his left shoulder pad, just for old times’ sake 😉

The main difference is in the face, if you ask me: Where 54mm Artemis’ face is classically handsome (in the way many retro Space Marines used to be), the 28mm models have noticeably broader features — whether this is merely due to technical factors or an actual attempt at giving him the broader, heavier features that seem to be a trademark of Space Marines in some of the literature, I cannot say. Personally, I prefer the 54mm face, not because of the additional detail, but because the callback to the older, more handsome Marines appeals to me in an entirely nostalgic way. Curiously enough, the bare head that came with the old Dark Angels veteran sprue really resembles 54mm Artemis, though, so if you want to change that part, that’s the face I’d recommend — in fact, there’s a fantastic older 28mm Artemis conversion by Siamtiger that happens to be using the head in question.

Death Masque release (7)
But that’s obviously nitpicking: Artemis’ new incarnation is a brilliant call-back to a classic miniature and also a fantastic looking centrepiece for a Deathwatch army in its own right — very nice!


Conversion options:

It goes without saying that I won’t be discussing the general conversion options for the older kits contained in the boxed kit, for obvious reasons, although my thoughts on possible conversions may be found in the aforementioned reviews of the respective kits linked above.

So this leaves us with the two special characters and the new Deathwatch sprue to discuss:

Eldrad could obviously become a building template for your own custom Farseer with just a few cuts and a bit of kitbashing. The prospect isn’t hugely exciting, certainly, mostly because we already have a generic clamshell Farseer who can fill that role, although it’s nice to have the option. Seeing how his breastplate (with most of the Eldaresque decoration) seems to be a separate piece, it should be possible to use the model as the base for a non-Eldar robed character, such as an Inquisitor, Imperial Psyker, Chaos demagogue or what have you. And of course it goes without saying that his sword and staff would also be cool conversion bitz for any Eldar players.

But really, when all is said and done, there’s no doubt that this model should probably be used to build Eldrad, above all else. So the most appealing conversion options here would be to make minor tweaks to make him resemble his classic incarnation even more closely (rotating the head counter-clockwise by a few degrees, and OFF WITH THAT BEARD!).

Artemis should be easy enough to tweak as well with some careful cutting — but once again, I find myself strangely reluctant to even think about using the model for a conversion. It’s such a cool shout out to the 54mm model, and using it for anything else would just lose that — and there’s really no shortage of Space Marine bitz to use, so we might as well leave this guy in one piece, eh? Just this once 😉

Come to think of it, the one tweak I think would improve the model would be to slightly rotate its head so as to mirror the 54mm version’s pose even more closely.

So with the two special characters best left untouched, for the most part, the Deathwatch sprue is obviously the true star of the show here, and rumours have it that GW really intends to package it with a huge number of Space Marine kits to give the Deathwatch a real push. And why shouldn’t they? The designers have been building up the compatibility of the various Space Marine kits literally for decades now, and towards this end, releasing a sprue that will allow you to turn virtually every Space Marine kit into a Deathwatch kit is a pretty shrewd move!

There’s also the fact that the sprue seems far more comprehensive than the Dark Angels and Black Templars sprues that were its distant predecessors (and those weren’t half bad either): If you carefully divide the contents of the sprue between your squads, you’ll get quite a bit of mileage out of those bitz!

Possibly the best part of the sprue, however, is that it really plays to the appeal of the Deathwatch: The great thing about them is that they allow you to build a Killteam or force that is very much centered around the individual models, as they all hail from different chapters. So if you want to test some ideas for a DIY chapter or build a model belonging to one of the more obscure chapters, building a model for your Deathwatch project will allow you to do just that without having to commit to an entire squad or army.

And we finally get a distinctive look for the Deathwatch — one that goes beyond the concept of standard tac Marines with black armour and a silver left arm. True enough, these are still Space Marines, but even if they lack the plethora of kits the Grey Knights have nowadays, at least they now have their own visual identity!

The flexibility of the sprue means that it should also become quite popular with converters: Whether you are looking to add a killteam (or a single Deathwatch veteran) to your army or want some suitably original and esoteric equipment for your chapter masters or Inquisitors, there should be something for you on this sprue. Even if you are going for true scale Deathwatch (because true INQ28 aficionados will only ever settle for true scale Astartes), you’ll be thankful for the Terminator-sized Deathwatch shoulder pads.


All in all, Death Masque seems like a cool boxed set that basically combines several of GW’s most successful recent ideas: If you look at the kits in the box, that’s some pretty major bang for the buck. The game functions as a standalone entity, drawing in new people and working as yet another gateway drug, so to speak. The redesigned Deathwatch will pluck at the heartstrings of veteran players and hobbyists. And the special characters provide that extra bit of sugar sprinkled on top — well played, GW!

So what’s your take on the new models and conversion bitz? I would love to hear your opinion, so feel free to drop me a comment! And, as always, thanks for looking and stay tuned for more!

An Orc is an Ork is an…Orruk?! A look at the Ironjawz release

Posted in Conversions, Orcs & Goblins, Pointless ramblings with tags , , , , , , , , , , , , on June 16, 2016 by krautscientist

Oh my, it seems like I am really lagging behind with those reviews and in-depth explorations of GW’s recent releases. Sorry for that! In my defense, however, it just takes a certain dedication (not to mention motivation) to sit down and do detailed writeups about new models, particularly when it would probably more instantly-gratifying to build new stuff! 😉

Then again, there are just some thoughts about GW’s recent offerings that I would like to share, so I hope you’ll indulge me, even when the models I’ll be talking about have been with us for a while.

Ironjawz Release (1)

So for today, let us talk about the Ironjawz, GW’s first Age of Sigmar foray into the greenskin faction: In the interest of full disclosure, let me just preface this post by saying that I have loved GW’s greenskins ever since I got into this hobby: I loved the greenskin models in HeroQuest, even though there were basically only two designs. I loved the greenskin armies back when fantasy armies were still predominantly made from pewter models (so I bought the pretty expensive army book as a lad, only to realise that an army really wasn’t an option, given the limits of my monthly allowance). I loved the fact that GW included an Orc starter army in the 6th edition box and wanted to start an army — it didn’t really happen. But I still like GW’s greenskin designs to this day, whether they appear in 40k or AoS — I even created a kitbashed Blood Bowl team from plastic GW greenskins. So yeah, I am a fan, and have been for quite a while.

For me, GW’s greenskins have always managed to straddle the line between legitimately scary and darkly humorous. I am aware of the fact that some hobbyists, particularly in the Oldhammer scene, prefer the slightly more lighthearted take of the yesteryear to the heavily muscled and more intimidating modern Orcs (or “Orruks”, for that matter), but I like the modern look well enough, and I think having the greenskins be both funny and scary at the same time actually adds to their character.

So this release was interesting for me, both due to my general affection for the greenskins, but also because I was curious about how GW would bring the greenskins over into the Age of Sigmar setting: So far, AoS has mostly seemed like an escalation of vintage Warhammer designs to me: Like a redesigned Warhammer by way of videogame tropes, Masters of the Universe and particularly cheesy heavy metal album cover art — and this doesn’t necessarily have to be a bad thing, mind you!

The problem is that Age of Sigmar doesn’t really seem to have found its own voice yet, mostly due to the seeming lack of depth to its lore and setting: So far, it has mostly seemed like “Warhammer turned up to eleven”. This is a problem that should arguably diminish with each army and faction getting more fleshed out, so looking at the way GW has chosen to revisit one of its most iconic factions should be interesting. And, to address the elephant in the room, how much will the new greenkins resemble something out of World of Warcraft?

This is a really obvious question, of course: A wealth of anecdotal evidence suggests that Warcraft was basically born out of heaps of inspiration taken from GW’s greenskin designs. Some rumours even say that the whole Warcraft franchise might been intended as a GW-licensed Warhammer game at some point. Whether or not that’s true, there’s more than a little overlap between both universes, and now GW redesigns its own Orcs, with a feature length Warcraft film just around the corner — interesting times, indeed!

With those thoughts firmly wedged into the back of our collective head, let’s take a look at each of the new kits in turn:


Godrakk, the Fist of Gork

Ironjawz Release (18)
Every new release needs that huge centrepiece model, and the Ironjawz are no exception. They do get quite a beast of a model, though, and one that is, at once, pretty different from the Orc warlords on huge beasts we have seen so far and also fits right in. Allow me to explain:

For the last couple of releases (and, for that matter, editions), Orc warlords would invariably be riding on some kind of ambiguously serpentine reptilian — mostly a Wyvern. During the early 90s, those creatures shared the same precarious posing and general “S-shape” as all of GW’s dragons, and I imagine the similar design outline was mostly due to the problems of producing a huge metal model that wasn’t just a solid lump of pewter while still looking like some kind of dragon.

And somehow it never quite worked out: There was just some kind of visual disconnect between the burly, heavyset Orcs and those serpentine mounts. Which makes me like the new orcish — pardon, “Orruk-ish” riding beast, called the “Maw-Krusha” looks far more massive and imposing, as this just seems a far better match for the rest of the catalogue!

At the same time, it’s great how the Maw-Krusha manages to incorporate elements of various creatures that have been part of Greenskin armies for a long time: It even resembles the old wyvern to some degree, yet manages to replace the slightly awkward, serpentine look with something more fitting. The overall body shape and scaled hide also manages to recall the plastic River Trolls, which makes for an extra bit of visual consistency.

The kit provides two different heads for the Maw-Krusha: The one intended for “Bigteef” is masked and muzzled and features some slightly strange cloth drapings — I originally thought this was supposed to be some kind of enemy banner being devoured by the creature, which would have been pretty cool, but it really seems to be a decorative element. Oh well…
The alternative, unhelmenetd head, on the other side, may just be one of my favourite monster heads ever produced by GW:

Ironjawz Release (22)
It’s suitably monstrous, sure. Yet it also has that “crocodilian inquisitiveness”, for lack of a better word: You can definitely imagine the creature staring curiously at something before some neural switch at the centre of its tiny, tiny brain goes from “0” to “1” and it just goes crazy — just watch any documentary about crocodiles or alligators, and you’ll know exactly what I mean. Anyway, the head just captures that expression perfectly, while also adding some subtle humour to the whole deal — which is, once again, a great fit for the greenskin faction!

In addition to the huge creatire, we also get an equally impressive Orruk warlord on top, of course. One option would be to use the kit to build Gordrakk himself:

Ironjawz Release (23)
And he really looks the part: From the massive armour to the impressive twin axes, this guy really looks like he means business! I also really like his screaming, one-eyed face:

Ironjawz Release (20)Greenskin models are often sold by the quality of their faces, really, and this one has a lot of character. Jolly good show! The necklace with the dwarven beard and the back banner may be a tad much, but that’s not really a big problem, seeing how it should be easy enough to just leave those parts off, or replace them with some alternate bitz.

Speaking of which, the kit also provides alternate parts to build a generic Ironjawz warlord, and it’s certainly nice to have the extra options!

Ironjawz Release (19)
However, the idea of pairing a massive spear/halberd/thing with a monstrous knife/sword/thing (held in a reverse grip, no less), seems kind of nonsensical to me, even for an Orruk warlord (and believe me, as a World Eaters player, I am no stranger to modeling audacious weapon combinations). The alternate face is also slightly less interesting than Gordrakk’s ugly mug, unfortunately:

Ironjawz Release (21)
Then again, the iconic iron jaw bit and different back banner are interesting enough alternatives. All in all, though, it’s clear that Gordrakk was the focus of this model. And, in any case, there’s only so much leeway and customisation that the kit will allow, due to the specific poses of both the Maw-Krusha and its rider, so building three of these that look totally different would be quite a task indeed!

But all in all, the kit certainly provides a massive and impressive and thoroughly orky – or should that be “orruk-y” – centrepiece model for any greenskin force, and I really like the audacity of this guy. Very cool!


Orruk Megaboss

Ironjawz Release (3)

In addition to the massive warlord on Maw-Krusha, we also get a generic warlord on foot, and the easy way of looking at it would be to say that this is basically the Maw-Krusha rider without a Maw-Krusha 😉

But seriously, what’s great about this model, right out of the gate, is that it marks the concept of huge Orcs (or, again, “Orruks”) finally arriving in the GW’s fantasy setting: In 40k, the idea of Ork warlords being far bigger and more massive than their followers has long been a staple of both the lore and the actual models, yet in the world of WFB, orcish generals weren’t that much more imposing than their soldiers — and it’s great to finally see that remedied with this model.

I really like the look of the massive, crude armour. It seems a bit more extreme than the greenskin armour we have seen in WFB, but it’s still well within the parameters of GW’s established design without seeming as stylised as something you’d see in, say, WoW. Even so, a certain “escalation” is clearly obvious in the design. But it makes for a nice enough looking model.

My one substantial complaint about this model is that it would arguably have needed alternative weapons more urgently than the Maw-Krusha rider, seeing how this guy is meant to represent your generic Orruk warlord. Granted, it should be easy enough to swap in some weapons from some of the other kits, but it still seems like a bit of an oversight.

On a slightly less serious note, don’t get me started on those skulls,…

Ironjawz Release (4)

Aw, screw it, I just can’t help myself, so here goes: The obvious thing first: The model’s whole silhouette and look is really dominated by that huge saurian skull strapped to its right shoulder, and it’s an element that not everybody will be keen on. I have to admit that I would probably carefully cut it off myself, and replace it with something slightly less ostentatious.

The real headache begins once you start thinking about where that skull came from, however: It looks like the remains of some kind of Lizardma…ehhh Seraphon creature, doesn’t it? But aren’t the Seraphon ghostly creatures now? So how do they leave any skulls in the first place?

Sure, this could be the remains of any huge predator from any of the new realms, and not really a Seraphon skull. But what’s that on the Megaboss’s other shoulder? A Bloodletter skull? But aren’t Bloodletters daemons? Then how do they leave skulls in the first place…? Like I said, it’s best not to even start thinking about it — how can an Orruk Megaboss make creatures without bones leave bones? Because he’s just that awesome! ‘Nuff said! 😉

Ironjawz Release (2)
Semantics aside, however, it’s a nice enough model and certainly one of the release’s most interesting pieces of conversion fodder. One or two parts of the model may be a bit too cartoony for my taste, but those should be easy enough to get rid of, so this guy gets a pass.

On a semi-related note, wouldn’t you agree with me that the model just looks so much better with red armour…?

Ironjawz Release (6)


Orruk Weirdnob Shaman

Ironjawz Release (14)
Shamans and magicians have always been a thoroughly weird part of greenskin society — it’s even part of their name there, see? – and so this guy’s slightly spastic look and pose are a great fit! He really looks as though he were being controlled by powers beyond his control (or by far too much fungus beer, but yeah…), and the model does a great job of communicating that feeling. Maybe the best part of the shaman is the priceless look on his face:

Ironjawz Release (15)
On the other hand, there are two parts of the model I really don’t like. One is the pair of horns or tusks awkwardly bound to the shaman’s head. A quick look at the sprue reveals that this part should, once again, be easy enough to get rid of, though.

My least favourite part is that smoke effect emerging from the top of the staff: It just seems silly – as sculpted smoke and magical effects are wont to do – and I’d get rid of it in a heartbeat. Kudos to the ‘Eavy Metal Team, though, for managing to paint it exactly like something from the cover of a 70s prog-rock album! 😉

Anyway, all in all, it’s a nice enough model, and having a plastic Shaman/Weirdboy available should be very useful for both AoS and 40k players alike.


Orruk Warchanter

Ironjawz Release (7)
This is probably my least favourite part of this release: The concept of a drummer/chanter/shaman type character seems pretty tired and unoriginal at the best of times. What makes matters even worse, however, is that, while the other models from the release manage to carefully flirt with the cartoony, videogamey Warcraft look, this guy just embraces it as hard as he can and ends up looking like some kind of WoW reject: The armour, those clunky bones — my immediate feeling was that this wasn’t a GW model at all, but a model produced by some other, smaller company during the late 90s. He just seems overly cartoony and bland to me.

The model’s only saving grace is, once again, the face: It’s really rather lovely:

Ironjawz Release (9)
But all things considered, it’s not enough to excuse the clunky, unoriginal rest of the miniatured. The Warchanter is easily the weakest part of this release, in my opinion, as the model seems more like an afterthought.


Orruk Brutes

Ironjawz Release (24)At first galnce, this basically seems like the fantasy version of 40k’s Ork Nobz kit. And just like that kit, this box allows us to build five rather massive …Orruks that are armoed to the teeth — so far, so good!

The bulky models in their massive, crude armour should be quite a sight on the tabletop, and I really like the juxtaposition of the heavily muscled bodies and the jagged, primitive armour plates:

Ironjawz Release (27)These guys really seem tough as nails, and they manage to fit the new Age of Sigmar aesthetic while also fitting in with older greenskin models, which is certainly not mean feat! I also like the wealth of options provided in the kit, at least according to a closer look at the various sprues!

If I have one gripe with the Brutes, it’s that some of the weapon designs just seem a bit too much: That massive, two-handed cleaver? The strange crab-claw? Those look more like toys than weapons, really — like the designers were trying just a bit too hard to make those weapons “uber-awesome”:

Ironjawz Release (28)
Maybe the problem is that these guys are just a bit too serious: They seem to be trying just as hard as GW’s sculptors 😉

All in all, however, the kit itself seems to provide a lot of options and a wealth of extra bitz, so it still stands as one of the best parts of the release, in my opinion.


Orruk Goregruntaz

Ironjawz Release (31)
This kit seems like an interesting addition, mostly because the plastic Orc Boarboyz are one of the more recent greenskin kits — and arguably one of the coolest. And now we are already seeing yet another escalation of the concept in the shape of even bigger and more heavily armoured Ironjawz Boarboyz — or rather, “Goregruntaz” (*sigh*).

The overall concept of a more heavily armoured greenskin cavalry is pretty cool in and of itself, though, and so are the riders: In fact, they are possibly my favourite part of the kit for a somewhat strange reason: Call me crazy, but their armour seems strangely reminiscent of the vintage Horus Heresy Cataphractii design , complete with the topknot sadly missing from FW’s Cataphractii. The jagged spears are, once again, ever so slightly over the top, but it’s less obvious here than with some of the more outlandish brute weapons. What’s more, the kit also seems to be packed to the brim with excellent bitz and faces. I mean, just check out that guy with the eyepatch. That has to be one of the coolest greenskin faces around:

Ironjawz Release (35)

The kit’s bigges weakness, on the other hand, are the boars, unfortunately: GW already had the perfect boars with their plastic Boarboy models, but it seems like they needed to turn this design up to eleven for the Goregruntaz, and they weren’t entirely successful with that. Some parts of the boars are quite cool (the armour matching the riders, for instance), but then you get to those enormous, far too large heads with those teribbly clunky beards and OTT dagger teeth, and you just cannot unsee that part.

Granted, the problem is less prominent on some heads. The armoured one is looking quite okay:

Ironjawz Release (36)
But the one with the wide open maw is easily the worst offender: It just seems clunky and, once again, overly cartoony to me:

Ironjawz Release (33)

Which brings me back to one of my main points of cricticsm about quite a few AoS kits, really: In order to make them ever more extreme and ultra-awesome, some of the restrain that makes a truly outstanding model is lost. If anything, those models need to be somewhat less extreme and over the top! I would argue that the Goregruntaz would have profited from a slightly more restrained design — or maybe even from reusing the existing boars with some additional armour plates?

As it stands, the kit is hurt by the somewhat silly design of the mounts and doesn’t provide the more awesome version of the Boarboyz it was probably iintended as.


Orruk ‘Ardboyz

Ironjawz Release (38)

Right, these obviously aren’t new, they are merely the “old” Black Orcs with a new name. I’d still like to discuss them in this review for two reasons: One, it’s interesting to see how these originally formed the most heavily armoured, badass Orcs and are now relegated to the position of fairly standard footsoldiers — this nicely shows the kind of escalation we are dealing with, in a way. The other aspect that stands out to me is that, surprisingly enough, they still manage to hold up fairly well, all things considered! I think they would need some leftover trophies and extra skulls to bring them in line visually with the newer kits, but that shouldn’t really require that much work, so the kit still seems to work fairly well!

Ironjawz Release (39)


Conversion ideas:

Let’s get the obvious things out of the way first: One, even if you have little love for Age of Sigmar and stick to the older rules, many of these models should still work in your army from a visual standpoint, as they are still recognisably GW greenskins. So there’s nothing stopping you from using those Ironjawz models to build, say, a particularly vicious looking Black Orc army — in fact, I like that idea a lot, come to think of it…

The other overarching idea for these kits is that it has never been so easy to create a really awesome Feral Ork army for 40k: Seriously, many of the new kits should be really easy o 40k-i-fy with a chainblade here and an exhaust pipe there, and I can easily imagine a fantastic looking Feral Ork force based on these new kits!

Beyond these broad approaches, let me also share a couple of more specific – if rather rough – ideas:

Gordrakk on Maw-Krusha

I think that Maw-Krusha would also work as a huge Squig (or even a small Squiggoth, maybe?) Anyway, wouldn’t it be fun to use this monster as some kind of Feral Ork attack beast? Or an alternate trukk? Or just mount some crazy contraption on its back and use it as artillery or a war machine or what have you? The possibilities are really endless here! 🙂

Orruk Megaboss

Now this guy is possibly the most versatile and useful kmodel for converters. Possile uses for the model include…

  • using him as an Ork Warboss in mega armour: Seriously, he’s huge and intimidating, and tech-ing up that armour should be lots  of fun! Just add a mean-looking circular saw or a claw and a huge shoota and you’re golden!
  • while we’re at it, why not go the extra mile and turn him into a plastic Ghazghkull? In fact, just check out this incredible WIP conversion by JeffyP to see how well this works!
  • on a similar note, I imagine the model would also work well as a basis for a huge and hideous mutant warlord for all our LNTD players and/or INQ28 aficionados! Sure, you would need to get rid of some of the more obviously orky elements, but the armour definitely looks crude and nondescript enough to work for some kind of big mutant!
  • speaking of INQ28, why not use this model as a “true scale” Ork as a worthy opponent for all those true scale Marines floating around? Or as a suitable end-boss for your Ordo Xenos Inquisitors to fight against?

Orruk Weirdnob Shaman

This one’s obvious: the model provides an excellent plastic Weirdboy for 40k, with as much or as little conversion work as you like involved 😉

Orruk Warchanter

Maybe, just maybe, if one were to get rid of those stupid bones and some of those surplus horns, I think he could make for an intersting gladiatorial type — he does have a suitable “Are you not entertained?” pose, after all. Yeah, on second thought, maybe that would be the best possible use for this model: Use him to convert a particularly huge and ugly pitfighter for INQ28 or Necromunda (Bull Gorg anyone?).

Orruk Brutes

These would be great as Ork Nobz — or even Meganobz, for that matter. I think they more original looking armour could make them look cooler than the stock Meganobz, especially if you take the time to add some suitably brutal weapons and augmetics to them. Once again, by the same token, the model could also become mutant overlords, provided you swap in some less orky weapons and heads.

Orruk Goregruntaz
You know what? I just cannot get that Cataphractii resemblance I mentioned out of my head. Therefore, what I would really love to see is a kitbash using those Goregrunta riders to make a squad of Ork Cataphractii, complete with orkish versions of classic Cataphractii weapons and corrupted Astartes iconography. I think that woul be an amazing project — and arguably a fun way of bringing Orks into the 30k timeframe?! If anyone does this (or discovers somebody else doing this), please feel free to send me a link! 😉


All in all, I am fairly happy with the release: There are a few missteps here and there, but what we have here, at the end of the day, are greenskin models that are still recognisably GW greenskins. Now this may not seem like a huge achievement, but I beg to differ: I think there was actually a pretty big danger of these guys basically ending up as Warcraft models. There’s a clear tendency visible in the models created for Age of Sigmar so far to feature designs that are slightly more videogame-y in nature than GW’s classic fantasy models. I am not saying that GW’s sculptors are consciously aiming for WoW as a design template (which would be fairly ironic, giving the somewhat intertwined past of Warhammer and Warcraft), but there is a certain visual “escalation”, for lack of a better word. And maybe the greenskins were in danger more than some of the other factions because Warcraft provides this large cultural influence — or maybe I am just imagining it All, who knows?

What I am getting at, however, is this: The new Ironjawz models still clearly read as greenskin models in the Brian Nelson school of design. They are still their own thing. And I am beginning to see what GW may be going for with the look they are trying to establish for Age of Sigmar, a design eking out a niche for itself between the established visuals of vintage Warhammer on the one hand and the more cartoony visuals you might expect of a videogame like Warcraft. It’s a delicate balance to maintain, certainly, and they may not be getting it right all of the time, but I can repect it for what it is now, instead of just considering it a mere Warhammer-knock-off. Does that make any sense?

Anyway, whether or not you appreciate Age of Sigmar as a setting or a game: If, like me, you enjoy GW’s greenskin designs, then you should find something to like about this release. And you can always get rid of the parts you don’t like with a trusty hobby knife 😉


So what is your take on the Ironjawz? Do you love them or hate them? Or something in-between? And is there a cool conversion idea that I missed? Feel free to let me hear your opinion in the comments section?

And, as always, thanks for looking and stay tuned for more!

Imperial Knights: Renegade — Gilgamesh Triumphant!

Posted in 40k, Chaos, Conversions, Pointless ramblings with tags , , , , , , , , , , , , , , , , on April 18, 2016 by krautscientist

A short interlude today, before I return with a more sizeable new post soon: With the release of Imperial Knights: Renegade, Chaos Knights are now very much a thing, even for those who shun the rules by Forgeworld (that have already been available for some time now). Due to the strange ways of the webway, I am pretty certain that the new rules will find their way to each and every Chaos player in pretty short order, and there is much rejoicing about this turn of events.

What makes this even better though, at least for me, is that my very own Chaos Knight, Gilgamesh, has actually made it into GW’s daily blog as one of the examples for converted Renegade Knights. Yay!

Gilgamesh on GW blog 01
Now I should probably be far more nonchalant and humble about this whole thing, but I simply cannot pull it off: Gilgamesh remains my biggest and most involved hobby project to date, and one that I am incredibly proud of, so to see him being featured on the GW site like this just makes me incredibly happy! Thanks so much to all the fellow hobbyists who brought this to my attention. And to the content managers at GW, obviously 😉

But this post should have some kind of use beyond allowing me to talk about how great I think I am, right? 😉
So, to all those of you who are now looking at the option of adding a Knight or two to their Chaos armies with renewed interest, on account of the new rules, maybe my collected posts about converting and painting my own Chaos Knight may prove helpful, so feel free to check them out here:






Also make sure to take a peek at this companion post over at Dark Future Gaming, where I discuss some of the excellent conversions that have inspired my own take on the Chaos Knight, because I am really standing on the shoulders of giants here!

The only cloud on the horizon here is how the ‘Eavy Metal Team seemingly didn’t convert and paint a dedicated posterboy Renegade Knight for the new game but rsther decided to paint over the heraldry of an already completed, pretty sweet loyalist model:

ImperialKnightRenegadeSeriously, guys: You have already painted a score of these beasts. Would one more really have killed you…?

But all in all, this has been an amazing surprise, both from a general hobby perspective, but also for my personal hobby life!

As always, thanks for looking and stay tuned for more! 🙂

Chaos Knight Gilgamesh, the Warrior King (12)