Totally rotten – a hands on with the Putrid Blightkings

There I was last week, talking about my ambitious goals for this year’s Call of Chaos — and already, I have been distracted. But worry not: I am still reasonably optimistic about my ability to go through with my vow, and there’s also the fact that the new Putrid Blightkings are the kind of kit you just have to start working on right away — and I would like to show you the results of that work today:

The basic idea with these guys seems to have been to collect all the best elements and details from every cool Nurgle model and piece of artwork so far and mash them into one box of plastic crack, thereby creating a bit of a “Best Of” collection. It works surprisingly well, though, finally giving us a way to emulate the hulking, pustulent characters that have only ever appeared in the artwork so far.

When it comes to actually reviewing the kit itself, Eric Wier of Between the Bolter And Me has put together a very concise and informative piece that I can only recommend. So with the hard work of reviewing the kit already out of the way, I am free to get my hands dirty and dive right in! Before we do that, though, I’d like to add a few observations of my own (in some cases reiterating what I said in my last post):

First up, I already commented on the size of these guys, and if anything, this aspect seems to have become even more relevant since my last post: It looks like many people were planning to use the Blightkings either as Plague Ogres and/or chaos spawn, yet the scale comparison below shows that they are not all that well suited to either function:

Blightkings WIP (2)
Many people seem to be disappointed about this. And, indeed, if you are looking for a way of converting Plague Ogryns, I’d suggest looking elsewhere: It would be far easier to just get a box of Ogres or Ogryns, the mutants from the WFB Warshrine of Chaos or a couple of Blood Island Rat Ogres and convert them accordingly. Some of the weapons and armour plates from the Blightking kit might come in handy for that kind of conversion, but I don’t really see a readily apparent way of making the heads, bodies and most of the arms fit Ogryn scale — unless you’re going for vestigial and/or atrophied limbs, that is…

But in my opinion, the glass is really half full rather than half empty: We really have enough possible conversion fodder of Ogryn/chaos spawn size readily available, as it stands! The Blightkings, however, are interesting in that they provide models that would work well as alternate Plague Terminators or, and this may just be the most interesting option, true scale Plague Marines — and without much need for making them bigger or bulkier. In fact, that’s the route I’ll be taking for my own Blightkings for now.

As people are beginning to work with the new kits, the first conversions are beginning to roll in: The spectacularly talented Jeff Vader has been working on some truly excellent Blightking conversions of his own that have been a huge inspiration for me. PDH has built some equally awesome Blightkings as an addition to his Realms of Chaos Nurgle warband (which, by the way, gets a feature in this month’s Blanchitsu, if the teaser on the GW website is to be believed) — I hope Peter will be showing his models to the general public soon. And I imagine other talented artists, such as JRN, migsula and the Spiky Rats, won’t be too far behind — I think we can look forward to a world of rot 😉

So, allow me to add my own pound of (maggotty) flesh: Let me walk you through my first couple of (mostly) finished Blightking conversions.

It shouldn’t surprise you that my basic approach was to bring the models into the 40k universe. I am not 100% sure what the function of these will be (or whether or not they’ll ever see the gaming table), but for now, simply exploring the kit and trying to bring it into my favourite grimdark universe is very much its own reward. So, without further ado, some pictures:

Here’s my first Blightking model. You already know an earlier incarnation of this guy:

Blightkings WIP (24)
This may still be my favourite of the bunch, although that doesn’t have anything to do with my conversion, but rather with the fact that the champion model is pretty much pitch perfect right out of the box. I chose a helmeted head (easily the coolest head in the kit) over the Plaguebearer face, because I liked the ominous look created by the helmet. Apart from that, the model was mostly assembled according to the instructions that came with the kit. To be honest, I did struggle a bit when it came to making this guy look more like a 40k model, but in the end, I think I came up with a pretty good idea: I added a cracked CSM breastplate to the model, making it look like the armour had burst under some hideous internal pressure. I am really happy with the result, because it adds a 40k element, leaves the hideously wonderful belly completely visible and, if anything, makes the model even more gross!

I also gave this guy a slightly modified backpack from the Dark Vengeance Chosen. I think the slightly twisted look is a great match for the overall Blightking aesthetic, plus the champ now has a bolter:

Blightkings WIP (25)
Several people have suggested using more futuristic weapons — but in the end, I just couldn’t go through with it. There’s just something about the sword and axe combo that I really like, and I just couldn’t bring myself to cut them apart…

The second model started out similar to one of Jeff Vader’s conversions, although I tried to take it into a slightly different direction. Take a look:

Blightkings WIP (27)
The base for this conversion was one of the (almost) fully armoured Blightkings, which made it much easier to turn this guy into a 40k model: The right arm was replaced with a Chaos Terminator arm (which also provided the gun). The left arm is from the Blightkings kit (although I used a bone from the WFB Crypt Ghouls to add a crossguard to the sword).

After quite a bit of deliberation, I chose a WFB chaos warrior head for the model: Not only is this one of my favourite heads, but it also fits Nurgle rather nicely, I think. Several people pointed out that the head was a bit of a missed opportunity, because a more Marine-like head would have helped making the model more futuristic. While I did want to keep the head, I also agreed with their point to some degree, so I added an array of tubes and pipes to the helmet, with some of them feeding into a custom backpack that I spliced together for the model:

Blightkings WIP (28)
It goes without saying that the backpack does have an ominous tank on top — par for the course with Death Guard models, really 😉

I also added some more detail to root the model more firmly in the 40k universe: some grenades and gear as well as a washer screw (painstakingly shaved off an Ork boy weapon). All in all, while the model still retains quite a medieval look and feel, I think it’s definitely futuristic enough to work in the context of 40k!

And finally, my third model so far, and possibly the most involved conversion of the three:

Once again, Jeff Vader provided the inspiration here (I shudder at my derivativeness… 😉 ): I wanted to build a Blightking conversion wielding a heavy weapon — but I did want it to look markedly different from Jeff’s approach, rather going for the classic pose of a heavy bolter being held in front of the body. Now let me tell you: The Blightking kit does not exactly lend itself spectacularly well to shenanigans like that, and getting the arms and pose to work out turned out to be a bit of a nightmare. I persevered, however, and after much cutting and gluing, I ended up with this:

Blightkings WIP (29)
The model ist still missing quite a few details, but I think it already gives you a good idea of what the finished model will look like. The arms holding the heavy bolter were painstakingly spliced together, using bitz from no less than four different sources (a WFB Chaos Knights right arm, Space Marine Sternguard heavy bolter, Space Marine Terminator left upper arm and, finally, the actual Blightking’s shield arm. All in all, I am really extremely happy that I went through with this idea, even though it was a lot of work! And even though I only realised it after the fact, the model could even be seen as a small tribute to this illustration by Adrian Smith.

I also think that the clunky heavy bolter backpack does a nice job of bulking out the model. I have begun converting it into a more Nurglite form, with yet more tanks welded on beneath the main body of the pack:

Blightkings WIP (31)
This is certainly the most WIP of the three models at this point, so there’ll be more details to come. But, again, I am really happy with this guy.

All in all, I’d like to quote an excellent point made by Eric in his review of the Blightking kit:

Games Workshop’s new approach  with the Blightkings provides some freedom to the consumer, while also letting the sculptors truly explore and convey their own creative vision.  And while some may argue that it makes conversions more difficult because you cannot simply swap an arm or body, I think it just encourages people to step out of their comfort zone and attempt more elaborate conversions, ones that are more than simply kitbashes.

This is so true! It took me quite a while to get started with these models, because the specific way the models were constructed seemed a bit intimidating. I was also forced to come up with at least a rough idea beforehand, instead of just seeing where the conversion took me. But in the end, this more involved and conscious way of working was a lot of fun, and I am really happy with the models I have managed to produce so far:

Blightkings WIP (32)
You can probably guess my verdict: These guys are excellent, and quite a lot of fun to work with. That said, they demand more work and more planning ahead if you want to make the most of them than, say, a Space Marine kit. They are a very interesting resource for true scale (Chaos) Space Marines. And they’ll give you a huge pile of Nurgle-y bitz (and then some) that you can use on your Death Guard or Chaos Daemons. Oh, and just a word of warning, perhaps: Once you’ve hit your stride, working with them gets quite addictive 😉

As for my own models, so far I’ve managed to come up with three characters that I am thoroughly pleased with. I am not sure whether these will be used as counts as Terminators in a small Death Guard detachment, as villains for INQ28, a Killteam or if I am just going to build an paint them for the heck of it, but when has that ever stopped me from kitbashing and converting, right?

It goes without saying that I would love to hear any feedback you might have in the comments section! And, as always, thanks for looking and stay tuned for more!

Blightkings WIP (33)

Advertisements

13 Responses to “Totally rotten – a hands on with the Putrid Blightkings”

  1. I hadn’t realized…that the real joy of the new nurgle kits..would be when you got a hold of them. So tickled, I could vomit and join the plague right now from all these lovely conversions.

  2. Great to see you have done more work with the Blightkings. Your Plaguemarines are looking really nice!

    The cracking breastplate for the champions is fantastic, exactly what I was envisioning doing (the head you used for him is my favorite one too!). I like your work on his backpack too; a clever way to giving him a bolter without making him hold it. Thoughts about adding a wooden stock to his bolter? Since he is not holding the weapon it should be pretty easy to add one.

    I also really like the marine with the heavy bolter. I appreciate all the efforts to get him holding the weapon with two hands! I would consider adding a barrel to the weapon, almost like a tongue sticking out from the mouth of heavy bolter. I really like how his face turned out. The venting in front of his mouth looks awesome.

    Keep up the great work!

    • Thanks a lot, Adam!

      Regarding the wooden stock: While I think it might be possible to add it by using some of the twisted wood handles that come with the kit, I fear it would mess with the model’s silhouette, because it would become the highest point of the model, due to the way the bolter is attached to the backpack.

      I did try adding a barrel to the heavy bolter, but it ended up taking away much of what actually makes that daemon head look cool, so I ultimately decided against it.

      In any case, thanks for the constructive feedback! Not every idea might stick, but those that do usually improve the model a lot, so keep it coming! 😉

  3. hi there,

    i follow your blog quite some time now, but since a few days i can´t see any of your pic´s. Did you change something?
    Any idea of what i can do, to see ´em again?

    thanks
    hrld

  4. Just as I thought, the models can be converted to WH40K, I just wasn’t sure how. Good that I stopped by eh?

    Great work. Paint them already!

  5. […] because they are simply fantastic for such conversions! I myself have tried that approach, and with some success, if I do say so myself. There are also the wonderful conversions by Jeff Vader (the first […]

  6. […] because they are simply fantastic for such conversions! I myself have tried that approach, and with some success, if I do say so myself. There are also the wonderful conversions by Jeff Vader (the first […]

  7. […] the likes of Jeff Vader at Officio Convertorum and KrautScientist at Eternal Hunt – check out these in particular (both blogs well worth checking out and – without wishing to sound sycophantic – […]

  8. […] all stars” showcase imaginable: So many people have already had so much fun with this kit (including yours truly), and the importance of this kit for all things Nurgle really cannot be […]

  9. […] second thought, I am almost happy now to have left the Blightking-based Plague Marines I converted quite a while ago unpainted for all this time, as I’ll now be getting another chance (and an added incentive) […]

  10. […] the real surprise came when I compared the new Plague Marine with one of the Putrid Blightking-based models I converted a while ago: The latter were originally conceived as true-scalish and ended up being about the size of standard […]

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: