Archive for hateful eight

State of the Hunt, week 41/2019: Meanwhile, Blood for the Blood God!

Posted in 40k, Chaos, Conversions, paintjob, state of the hunt, WIP, World Eaters with tags , , , , , , , , , , , , , , , , , , , , on October 8, 2019 by krautscientist

In between all of the shadowy, Inquisitorial dealings, I had an appetite for something a little more blunt and straightforward, just as a little snack, so to speak. And what could be more straightforward than a follower of Khorne? “Chainaxe to the head”-types, all of them. So for this week’s update, I have some World Eaters to share with you!

A while ago, I talked about the models for a possible World Eaters killteam – codenamed “The Hateful Eight” for now – and showed you some of the possible models for it, some of them brand new, and some refurbished earlier conversions of mine. And it’s from this last category that I chose my two models for today:

To get things started, I chose a model that I built years ago. This gentleman here:

It’s one of my unpainted conversions that I feel still hold up next to the new CSM models, so it seemed like a good moment to finally put some paint on the guy. Oh, and to be fair, the model did get a new axe while I was at it. Anyway, I quickly made good progress with the paintjob:

One of the things I really want to push with my new batch of World Eaters is a certain variety of skin tones, at least where unhelmeted heads and bare arms are concerned: The World Eaters are, canonically, an ethnically diverse legion that recruited from many different homeworlds during the Great Crusade (and probably still does, given the scavenger nature of most traitor legions in the 40k timescale). Only my World Eaters never bore out that diversity because I would always use the same, greyish skin tone for all of my older models — pretty effective as far as paint schemes go, but seeing how I am trying to evolve my painting for these new models, it seemed like the perfect excuse to experiment with a wider set of skin tones as well. So I went with black skin on this model, and I am very happy with the result — even moreso because the recipe was almost laughably simple: Just basecoat with GW Doombull Brown, wash with a Fleshtone and mix the base colour with a bit of white for the highlights — done! I also used the highlight colour to add some nicks and scratches to the face to suggest old scars.

One thing that was really surprising to me was how adding the backpack really made this model: It should be such a trivial thing, really, but in this case, it’s what really makes the model read as an Astartes: With the backpack in place, it has the silhouette and bulk it needs:


After this, it was mostly a matter of cleaning up some minor areas, add a bit of Tamiya Clear Red here and there and finish the base. So here’s the finished World Eater, finally painted at long last:






The next model I decided to tackle is also a neglected conversion, although a more recent one: The model was created using a Blood Warrior from the Age of Sigmar 1st edition starter box, the legs from the CSM Vrash Tattersoul model and a couple of additional chaos bitz (chief among them a Raptor chainsword arm):


It’s a conversion I am really fond of, if I do say so myself, maybe because it’s almost a bit of a shout out to the classic early 90s metal berzerker champions that would always have some kind of running pose going on 😉

Anyway, with the success of the first model still fresh on my mind, I quickly got to work. Here’s the second World Eater, with the base colours already mostly blocked in:


And here’s the finished model:







I am maybe a bit too in love with the model right now, but it’s honestly really close to what I think a 40k World Eater should look like: a massive, baroque monster in serrated crimson warplate.

So here are the next two members of “The Hateful Eight” — it really feels great to have crossed two more items off my list of long neglected models, and I am also really happy with the result:


Incidentally, both models definitely count for Azazel’s current “Neglected October” challenge — and by virtue of the Ork skull on his base (and because berzerkers will slay anything that moves), the second guy also very much counts for his “Orcslayer” theme as well — teehee 😉

So here are the three new Khorne Berzerkers/World Eaters legionaries I have painted so far using this new approach:


Now if you add my counts-as Huron Blackheart (now officially named “Euron Hearteater”, by the way — cheers to fellow hobbyist AHorriblePerson for the suggestion!), the batch of “new” World Eaters is slowly starting to look a bit more substantial:

So what’s next for the Hateful Eight? I think I’ll be working on these two models next:


Interestingly enough, both conversions were inspired by pieces of artwork: I created the model on the left after seeing this illustration by Diego Gisbert Llorens,…

illustration by Diego Gisbert Llorens

…whereas the guy on the right is obviously a recreation of Mark Gibbons’ seminal piece of artwork (as previously discussed).

 

But those guys are a story for a different time (and my subject matter for a coming painting session, I guess). For now, I would love to hear your thoughts on the new models, so please leave a comment! And, as always, thanks for looking and stay tuned for more!

Advertisements

State of the Hunt, Week 32/2019: Chaotic exploration

Posted in 40k, Chaos, Conversions, Fluff, state of the hunt, WIP, World Eaters with tags , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , on August 10, 2019 by krautscientist

Hey everyone, Real Life (TM) has been a veritable rollercoaster lately, so I haven’t been as productive on the hobby front as I would have liked. If anything, however, that’s actually a plus because it frees up some space to share a couple of chaotic kitbashes I have been creating by putting the “new” (granted, they have been around for a while at this point) Chaos Space Marine kits through their paces. Take a look:

 

I. The Blightwood grows…

The first model I would like to share with you today isn’t even such a huge project, but rather an example of using some óf the new bitz to spruce up existing conversions. Enter exhibit A, a kitbashed Foul Blightspawn I created earlier this year.

My original idea for the model was to a) make the most of a leftover extra Malignant Plaguecaster model that I had cannibalised for bitz and use the remains to build yet another Death Guard character and b) get rid of some of the parts of the stock Foul Blightspawn that I really didn’t like, such as the massive pump sutured into the model’s flesh and the weird garden hose-style weapon.

So the original model was already working pretty well for the most part, but it was also still lacking something — and to make things worse, before the new CSM models were released, I didn’t have any correctly scaled CSM parts to tweak it a bit more.

But a headswap, courtesy of the new vanilla CSM kit gave me this:







I didn’t really like the CSM head with the one “googly” eye (normally intended for the squad’s heavy weapons expert), but it works really well for a follower of Nurgle. I spliced together a breathing apparatus as well, while I was at it, and opened up the pose a bit.

I am still rather fond of the core idea of the conversion – using an Escher chem thrower to make a slightly more conventional version of the Blightspawn’s stock weapon – although I think I also did a reasonably good job splicing together one of those WW I-style Blight grenades from a couple of bitz:

I also saw an extremely clever idea over at ssspectre’s blog that I had to steal right away: He used a turbine from a Raptor jump pack to create this kind of weird, bulky engine/pump on the back of a Nurglite model, and I did the same on my Blightspawn conversion, adding a bit of bulk and weirdness to the backpack.

In fact, I even made one more tweak after taking the photos above, adding some semi-organic cabling to the backpack that I carefully clipped off one of the new Havoc rocket launchers and backpacks.

And, just for fun, a comparison shot with my (slightly converted) Plaguecaster and the new Blightspawn — both use the same base model:

After using some smaller bitz and bobs from the new CSM kits like that, I felt the need to get a little more creative. So that’s what I did:

 

II. Iron Within…

This next model is a slightly bolder project, and also makes even more use of the new CSM kits: I had an idea for a Warpsmith-like Iron Warriors character, eventually to be used in my Iron Warriors Killteam I suppose. So I made this guy:

The body intended for the heavy bolter wielding marine from the vanilla CSM kit made for a nice start, providing a suitably bulky, archaically armoured body with a stoic pose. The arms and shoulder pads also came from the vanilla CSM — for the most part. I did feel the need to include a somewhat more impressive weapon for a Warpsmith of the IV Legion, so I spliced together the left arm using an (Age of Sigmar) Varanguard hammer and a forearm and haft from the Chaos Lord on Manticore (since I needed a left hand holding a weapon for this conversion). The backpack started out as a backpack from the new Havoc kit: I really liked the reactor look it had going on! I simply shaved away some of the cabling, added a loader arm (from a Havoc missile launcher backpack) that should work just as well, if not better, as a proper servo-arm, and also added some tech-y bitz – including the heavily augmetic head – from the Adeptus Mechanicus Kataphron kit.

I think the model proves how even the vanilla CSM kit,with just a few bitz from other kits sprinkled on top, can be used to produce rather imposing characters and commanders!

 

IV. The Hateful Eight cont’d

All roads lead before Khorne’s throne, however, so those earlier kitbashes were merely an appetiser before the inevitable main course. Which is a roundabout way of telling you that I have been slowly tweaking away on what may (should) eventually become that World Eaters kill team I have already told you about — “The Hateful Eight” (or ten or sixteen or whatever…). Here’s a look at my short list of future kill team members, so to speak:


Now you’ve seen many of these before in some shape or form, for which I apologise. Also, half of them are repurposed older models, but I think they are still cool enough to warrant a modern paintjob:

I’ve been making tweaks to them, exchanging a weapon here or adding some grenades and Khornate doodads there. I am particularly fond of this guy, made by combining a Blood Warrior from the Age of Sigmar 1st edition starter box and the lower half of the CSM Vrash Tattersoul champion model:

There’s also a couple of “new guys”, however: Fresh conversions that rely on the new kit in some shape or form:

On the far right you can see my “test berzerker” from earlier this year. Then there’s this gentleman, converted from yet another AoS starter box Blood Warrior:


I always knew I would want a model wearing a clunky Heresy-era helmet to accompany its baroque armour, and this is that model 😉

Fot the next two models, I thought it might be fun to try and channel some of the most iconic (or interesting) pieces of World Eaters artwork and build models inspired by the art. First up I chose this very cool concept for the “Teeth of Khorne”, the World Eaters’ dedicated heavy weapons specialists, created by Jes Goodwin during the early 90s, I would imagine:

Artwork by Jes Goodwin

I realised that many elements of the new havocs strongly resembled this piece of art to begin with, so I tried to come up with something similar.

For the most part, this is really just a stock havoc. I replaced the head with a shaved-down Blood Warrior helmet and tweaked the backpack a bit. Also, since I didn’t have a plasma cannon, I was unable to perfectly replicate the art and had to choose a replacement — a missile launcher seemed suitably brutal and straightforward for a World Eater, though… 😉

And then there’s this guy:

Any ideas about the inspiration for this one…?

That’s right, it’s a model built to resemble this iconic piece of art by Mark Gibbons (supposedly showing Khargos Bloodspitter, of all people):

My idea for this conversion was born when I realised that both the straighter legs and the power fist included in the CSM kit would allow me to build something pretty similar to the artwork — but while the above mockup worked as a proof of concept, the conversion needed a lot more work! So here’s what the finished conversion looks like:

Some parts of the conversion are actually a departure from the artwork, albeit a conscious one: The first helmet I used is arguably closer to the artwork, for instance, but the one on the finished conversion (provided as part of a bitz drop by fellow hobbyist ElDuderino, by the way), exudes just the kind of brooding menace that the model needed.

Funnily enough, the model also serves as a pretty neat shout out to some really old World Eaters models, thanks to the static pose:

And here’s the new guy, next to my test World Eater from earlier this year:

So, as you can see, I am actually back to converting World Eaters again — at least for a bit. And I am not even finished, either. Here’s a small teaser of things to come…

V. Burning Man

For now, however, let us wind up this post with a bit of background: I prepared a little background vignette for the counts-as Huron Blackheart model I shared with you a while ago. Take a look:

„The burning never stops.“

This is the sentence he remembers above all else, because it has come to encapsulate his entire existence. While the memory of an Astartes is eidetic in nature, his long life has become a number of disjointed, fragmented moments, with entire decades mostly unaccounted for. But one thing remains. One thing binds everything together and defines him. One sentence neatly summarises it all.

“The burning never stops.”

He remembers how the sentence from weapons instruction returned to him, at the very moment that he saw the phosphex charge go off. The bridge was a pandemonium of blood and death, but everything was frozen into place for just one instant. He saw everything in incredible detail. The battered VII Legion Breacher team that, against all odds, had made it to the bridge in an attempt to bring down a leviathan from within. The mangled face of the Fist throwing the phosphex grenade at him. The eyes already staring into infinity, waiting for a death that would come in mere seconds. The explosions of the weaponry discharged by the other surviving breachers. The chainblades of his brothers falling in slow motion, trying to bring down the enemy. But slow, far too slow. And the green white fire of the phosphex charge, enveloping him at last, and flooding his every fibre with liquid agony, just seconds before the main viewport burst into a million armourglass shards, opening the bridge to the void.

He remembers Terra. The Throneworld twisting below him, above him, behind a curtain of voidships on fire, as he tumbled into blackness. The cold void that was the only thing that could have extinguished the flames that were swallowing him. But even when the fires went out…

…the burning never stopped.

He remembers coming to in a red haze. The sounds of the Apothecarion. The klaxons and warning beeps. The mirrors above the surgical slab showing him a lump of molten, misshapen flesh that he did not recognise. And Deracin’s half-augmetic face floating above him, like a hint of things to come. The Forgemaster locked eyes with him and smiled. And he knew that he would not be allowed to die.

He was rebuilt. Into a strange amalgamation of oh so little flesh and bone, iron and pain. Oh so much pain. He became a construct. Like the gholam of old Terra. And through it all, the pain of an unquenchable fire kept coursing through him, racing along nerve clusters that should have been cauterised beyond any function. Along iron bones that shouldn’t have been able to feel, but did. It has been thus ever since: His every waking moment is pure agony. Inhale. Pain. Exhale. Pain. The nails are but pinpricks to him. He is, eternally, on fire.

His wrath and pain almost seem like a separate entity. When he does battle, and his every cell is burning agony, he can almost see something take shape from the corner of his eyes. Something rough and bloody that is glowing in its own inner malevolence. It is growing all the time. There will come a time when he will finally meet it face to face, this thing he keeps feeding with his pain and with the pain of others.

He keeps losing time. Battles often turn into disjointed shards of perception for him. When he sees glimpses of that strange spectre that seems to shadow him, inexplicable things happen, and he is merely a spectator in his own body: His flesh turns into liquid flame, and he becomes capable of feats that should be beyond his patchwork body. He awakens to arcs of warp fire cascading from his axe and augmetic fist. He comes to in a world of cinders and flaking ash, with his enemies’ lifeblood running down his chin in rivulets. He sees the wariness in his brothers’ eyes, and to see such emotion play across their ravaged features would make him smile, if that expression were not lost to him.

And through it all,
The burning never stops.

 

It goes without saying that I would love to hear your thoughts on these models! And, as always, thanks for looking and stay tuned for more!

Berzerker (R)evolution

Posted in 40k, Chaos, Conversions, paintjob, WIP, World Eaters with tags , , , , , , , , , , , , , , , , , , , on May 14, 2019 by krautscientist

After last week saw me complete a World Eaters Dreadnought, today another member of the XII legion muscles his way to the front of the queue — so what is this about?

The recent Chaos Space Marines release has been a bit of a bittersweet affair for me. Sweet, of course, because the models are obviously brilliant, and such a long overdue reworking of some rather ancient kits. At the same time, however, the added size of the new CSM makes a rather big part of my World Eaters look pretty runtish. There’s also the fact that I don’t see myself revamping the entire army anytime soon — or, in fact, ever: I’m not sure I still have it in me to build and paint huge 40k armies, as I am much more interested in smaller, bite-sized challenges like INQ28 retinues or single pieces that appeal to me. And yet I did of course want to get in on some sweet chaotic action — so what was I to do?

The best possible approach was to start by purchasing some new plastic crack, of course, so I hot myself a box of vanilla Chaos Space Marines and Havocs each (I just couldn’t resist the massive, brutal look of the Havocs, even if rules don’t even interest me all that much at this point). And I began some preliminary experimentation.

Now as many of you will already know from firsthand experience, the new CSM are noticeably taller than the older models, and that makes quite a few of my chaos models look rather weird next to the new guys. Unfortunately, this includes a fair bit of my still unpainted stuff. So the first order of the day was to find out which of my more recent (unpainted) chaos models were still salvageable. In order to find out, I quickly poster-tacked together one of the new models to serve as a point of reference:

Keep this guy in mind — we’ll be seeing more of him shortly…

This guy was mostly built straight out of the box — although, as you can see, I couldn’t help adding a Caedere Remissum helmet crest, even at this early hour — more on that particular design decision later…

Using the new guy as a point of reference, I was lucky enough to find some models that might still work.

There’s my WIP Iron Warriors kill team, for starters:

Now this project was started before Kill Team was even a thing (again), so I mostly played it by ear back then, and built models that appealed to me from a visual standpoint. At the same time, I did try to go beyond the look of vanilla CSM with this project, so most of the models (except for the one tester lurking in the back whom you may safely ignore) were mostly based on Chose models from the Dark Vengeance boxed set. And while the models are still a bit shorter than the new CSM, they don’t look too out of place. Two Iron Warriors remain unpainted, but have already been built, as you can see, and after that, I think I’ll be adding a heavy weapons specialist (built from one of the new kits), add a few suitably IW-themed cultists and call it a day. The finished team should hopefully still work well enough. And KiIl Team, with its smaller model count and potential larger focus on individual characters (and models) appeals more to me than standard 40k at this point.

But where does that leave my World Eaters?

Well, the good news is that I found some guys that should still work rather well in this new, upscaled world. Take a look:

Once again, most of these conversions were heavily based on the Dark Vengeance Chosen, so they still work fairly well (even though they are just a tad shorter than the new models):

I also think that coming up with a really cool World Eaters Kill Team (code name “The Hateful Eight”) should be a very rewarding project in and of itself. If that prompts me to keep building and painting World Eaters for 40k proper afterwards, so much the better. But for now, I want to explore the new kits and use them to build some of the best World Eaters I can come up with — at least that’s the plan.

That being said, the new kits turn this into an interesting challenge, because many well established conversion recipes may not work anymore due to the slightly changed scale (many stock arms, for instance, just seem too short on the new models. As do the chaos marauder arms I have used many times to create the classic “bare arm” World Eaters look). So my first little project was to find out how to make the new vanilla CSM look more like World Eaters, so I started to mess around with a couple of bitz:

The good news is that most older helmets and shoulder pads should still work fairly well — this includes some of the older FW shoulder pads (as seen here with the pauldrons from the berzerker conversion kits. They torso pieces from the same kit, however, are right out).

But I also wanted to do something slightly more involved for my first test model, and after looking for a while at a Blood Warrior chest piece, I got a bit more creative:

Some of the new breastplates are still a bit bland, to be honest, so I decided to splice in some Khornate goodness: I carefully cut through the torso front just above the abdomen as seen in the picture above.

The Blood Warrior breastplate (seen on the left) fit with just the slightest fraction of shaving. However, there was a huge gap underneath it that, while not directly visible when looking at the model from the front, still made it obvious that the torso was hollow. So I used a bit of GS to create a small lip, like this:

Then the Blood Warriors breastplate was simply glued on. The GS plugged the gap, and the new torso works really well, what with the cabling on the abdominal section and everything:


Granted, the whole assembly seemed a little less convincing when seen from the side:

But most of this should end up being covered by the arms anyhow — I merely added some GS to create a straight surface for the arms to attach to.

Here’s a mockup of the entire body:

Now I was really pleased with myself at this point about how clever a conversion I had created. However, I only realised after completing this particular conversion that to replace the breastplate like that would have been even easier on some of the other bodies from the kit, because those already have the breastplates and abdominal section separated from the get-go. Oh well, we live and learn… 😉

Anyway, a short while later, I had my first World Eaters test model made with the new CSM kit:


I think there’s something so malevolent about this guy’s pose — like a predator stalking its prey…

Of course I decided that I would need to get this chap painted right away, so I adapted the colour scheme I had used for my recent Chaos Dreadnought for use on the smaller model and used quite a bit of time to make sure to get the paintjob just right…

Once again, brighter reds and oranges were used both for edge higlights, but also to create scratches and scuff marks, in order to make the armour look pitted and ancient, and to suggest a texture to the whole warplate.

Oh, I also included a shout-out to Wade Pryce’s World Eaters, one of my biggest inspirations when I got back into the hobby: The stylised legion badge was very much inspired by the way Wade used to paint the World Eaters symbol.

Anyway, to make a long story short, allow me to share my first finished World Eaters test model created using the new CSM kit, fully painted and based:








I did decide to include a bit of blood on the chainsword, using Tamiya Clear Red to create the effect:

And here’s another peak at that legion badge inspired by Wade Pryce’s old models:

And here’s a pretty nice shot (if I do say so myself) of the new World Eater next to Argus the Brazen:

Now as for the evolution of my berzerker painting scheme and, indeed, my Khorne berzerkers, I have prepared a little comparison shot to show you the evolution, as it were:

On the left is one of the first Khorne Berzerkers I painted back in 1998 or so, back when the plastic kit was released. These guys still saw use in my modern army, mostly because I was too lazy to replace them. Next in line is the first World Eater I painted when getting back into the hobby after a longer hiatus, in 2010, but using a slightly tweaked recipe. The third guy was an experiment on replacing the – by then OOP – Blood Red with Mephiston Red, but back then I wasn’t quite happy with the effect. And there’s my brand new little guy — maybe this time I have finally managed to nail the recipe? What do you guys think?

I also took a couple of scale comparison pictures, just to illustrate my earlier point about the new kit making most of the classic catalogue look rather tiny.  The difference is not equally pronounced between all CSM: For instance, the DV Chosen are just a tad shorter than the new CSM, but it’s not too obvious. Old CSM models, however, just look really awkward next to the new guys, at least if untweaked. Take a look:

Almost a little painful to look at, isn’t it? 😉 The new Marine just seems much taller — and indeed he is. Now here’s a comparison with an old model that was nevertheless a  slightly more involved kitbash:

This comparison is interesting because it shows off both the evolution of my painting recipe, as well as the fact that the legs from the new kit are quite a bit longer, the torso is broader, and the backpack no longer dominated the entire model as much. It’s especially obvious when looking at the back of the models:

Next up, another round of comparisons with some taller models:

For starters, here’s my new World Eater next to Brother Arcturus Diomedes, based on a Primaris marine:

As you can see, the new CSM are not quite as tall as Primaris Marines, but they are closed (and could be used as true scale models opposite Primaris in a pinch).

And here’s a comparison with one of the wonderful converted World Eaters my buddy Augustus b’Raass sent me earlier this year:

Augustus’ model was created using older part, but it’s heavily converted and built to be taller than a standard CSM, so you barely notice the difference in height. So that’s the good news for those hobbyists with highly customised and converted chaos armies, I suppose — your guys still look good, in spite of the scale creep 😉

Also, don’t get me wrong: Ultimately I would say the new scale is for the best — it finally gives the Chaos Space Marines the stature they deserve, because unlike their loyalist counterparts, they have skipped one or two rounds of scale creep. By the same token, however, the change is so significant that it presents a couple of challenges to chaos players now, but those can definitely be overcome. In fact, I would say that to figure out how best to use the new kits and how to work around the changes in scale seems like just the kind of creative challenge that should delight chaos players all over the world!

For now, I am pretty happy with my first test model, and I am actually looking forward to painting a couple of World Eaters again — who would have expected that, eh? Anyway, I would be happy to hear your thoughts on the new model, of course, so please leave a comment! And, as always, thanks for looking and stay tuned for more! 🙂