Archive for the huntress

A Child for the Warrior King, pt.6 — and a small interlude

Posted in 40k, Chaos, Conversions, WIP, World Eaters with tags , , , , , , , , , , , , , , , , , , , , , , , , , , , on October 15, 2018 by krautscientist

My hobby work has not been all that exciting recently: The combination of a decided lack of feedback here on the blog and a prolongued downtime over at The Bolter & Chainsword has worked as a bit of a dampener to my hobby motivation. But I have a new update to share with you all, dealing with my second converted Armiger once again. And as a special treat, I’ll also sneak in a small bonus-review somewhere along the way, so keep your eyes peeled ๐Ÿ˜‰

But first things first: My second Renegade Armiger was already mostly finished in my previous post, but it still needed that final bit of attention, especially when it came to finishing the chaotic decoration: The most important part was to add spikes and skull trophies to the top carapace. At the same time, I also grafted some small teeth, carefully shaved off the little vanes that come with the CSM Raptors, to the pauldrons and leg armour, for that certain chaotic je ne sais quoi.

So here’s the result:


Those added elements really do a pretty great job of pulling all of the parts of the model together from a visual standpoint, plus they also serve as a parallel to my other Armiger Warglaive.

So the model is basically ready for paint now. Take a look:


Oh, and after adding the final layer of detailing, I also straightened out the cockpit and pilot, making a few final tweaks and additons here and there. So here’s the completed build for the Huntress inside her cockpit:


As you can see, the way the Huntress controls the machine actually matches the setup I used for the first Armiger. This time around, however, I actually made sure to make the alignment of the machine’s head match that of the pilot (it’s only a small thing, but since I used the standard Armiger head this time around, at least beneath the extra bitz, it was easy enough to keep the head poseable):


I am actually really happy with the conversion, plus I think the two Armiger really work rather well together. Several people on the forum pointed out how the machines seemes like two pack mates, ready to bring an opposing Knight (or even Titan?!) down, and how the new Armiger actually seemed a touch more feral than the first model. Since that’s the impression I was really going for, I am rather happy to have achieved that dynamic with the two models:

Incidentally, I also made a small tweak to the Hound, adding some Blood Warrior decorations to his pauldrons. See if you can spot them in the picture above ๐Ÿ˜‰

 

Bonus review: Canis Rex

So, while we are on the subject of (Imperial) Knights, allow me to sneak in some thoughts on one of GW’s fairly recent releases thtat I have wanted to share for a while: I am talking about Canis Rex here:

The release of Canis Rex was interesting for a number of reasons: It marks the third revision of the Imperial Knight kit in almost as many years, for one: Each subsequent release has added new parts and options, and this latest kit is no exception, providing us with all the weapon options released so far, along with a new weapon, the las-impulsor, that can be used to assemble the model as a Knight-Preceptor. So far, so good. At the same time, Canis Rex is also a veritable named character, so the model comes with original parts to turn a generic Knight into Canis Rex with its unique heraldry. Last but not least, there’s also the fact that the kit provides us with the bitz for a fully designed cockpit – something that the GW-Knights have lacked so far – and for the pilot, Sir Hekhtur the Chainbreaker.

Now my love for the Imperial Knight per se is well documented, and I still consider the model a landmark release and one of GW’s finest modern kits. All the original kit’s strenghts remain, obviously, and we actually get some new toys to play around with. So let us take a closer look:

Let’s start with the new weapon: Where most of the Knight weapons we have seen so far have a rather more brutal, archaic look, this new gun hews closer to a more experimental, “Martian Deathray” look, which is nice. On a related note, looking at the silhouette of the weapon, I cannot help but realise how you could probably kitbash a similar weapon using the side panels from a 40k life pod (from either the 40k objectives kit or the new Kill Team: Rogue Trader boxed set), if you need the weapon but don’t want to buy the new kit.
Whether or not you like the las-impulsor, though: The kit also seems to contain every other Knight weapon released so far, so the world is really your oyster here.

When it comes to Canis Rex’s unique armour plates (and heraldic elements), those bitz are nice, if a bit vanilla: The facemask strikes me as ever so slightly too generically medieval, but that’s purely a matter of personal choice. On the other hand, the combination of a wolf/dog head and a chain on the tilt plate and banner make me wonder whether those bitz might be useful in a 30k World Eaters/War Hounds project…

What I really like about the inclusion of those bitz is how GW actually embraces the idea of having those Knights be true individuals — something that has always played a big role in the background, but it’s still nice to actually see that philosophy now realised in model form. If anything, coming up with your own background, heraldry and backstory for your noble is something to be encouraged.

So far, the additions to the kit are nice but not exactly massively exciting.This all changes with the third big addition to the kit, however, and easily the biggest draw of the model, if you ask me: The inclusion of both a fully detailed cockpit and a pilot:


Seeing how the nobles piloting the Knights were already being played up as important and powerful individuals in the background, I actually find it baffling that it has taken GW so long to represent them in model form. If anything, I feel Imperial Knights should have been themed around their pilots from the get-go. But anyway, now we finally get our pilot model, and both in a walking and a sitting form, which is nice:


I like how the model’s armour/pilot suit neatly straddles the line between baroque(medieval and functional — it arguably works better with the general 40k aesthetics than Forgeworld’s almost too sleek and futuristic looking Knight pilot. At the same time, it’s also nice how some design elements (see the arrows on the armour plates, for instance) are shared between the Knight and its pilot.

Now while the pilot is supposed to be Sir Hekhtur the Chainbreaker, it’s easy to see how a simple headswap would be enough to turn him into an original (male) knight pilot. Creating a female noble from those bitz would still be possible, albeit with a bit more conversion work — and maybe the inclusion of some of the slightly narrower Genestealer Hybrid body parts.

When it comes to the actual cockpit, I really love how GW’s sculptors have managed to squeeze lots and lots of detail into a pretty tight area (believe me, I know): The design looks great and channels visual cues from both Forgeworld’s Knights and various Titans:

If I have one criticism, it’s that I think the controls are almost a bit too modern and “Space Marine-y” and should maybe have looked a bit more archaic – like the kind of tech you see in Forgeworld’s Titan cockpits – but the design still works very well, and the option to build it so it can even be looked at with the top carapace closed and the hatch open is an awesome little touch:

 

For me, and other hobbyists as weird as me, coming up with a way of building the interior of a Knight has been one of the most interesting parts of working with the model. So seeing an “official”, readymade version now is a slightly bittersweet moment: On the one hand, it’s great that GW has finally stepped up and provided us with the building blocks for a Knight interior. At the same time, however, this also takes away some of the adventure, for lack of a better word, and challenge of scratchbuilding and kitbashing an area like this — oh well, at least we still have the Armiger interiors to think about ๐Ÿ˜‰

On a related note, and if you’ll excuse a bit of boasting, I have to say that I am really rather happy with the way I managed to come up with something pretty similar to GW’s “official” look for the pilot and cockpit years ago, back when I built my own Knight:



So for those who do not own any Imperial Knights yet, you guys are in luck: You are now able to pick up the definitive version of an already fantastic kit and end up with lots and lots of beautiful options to play around with. If, like me, you were among the early adopters of the Imperial Knight, you might be forgiven for feeling a bit left out (and for being expected to buy yet another 100+ Euros kit). The third revision of the kit in as many years. Because much as I like this newest revision to the kit (and much as I liked the previous revision), I cannot help asking myself whether those weapon options and cockpit bitz could have been part of the model from the beginning — the pilot and cockpit, in particular, seem like parts of the sculpt that must have been considered from the beginning…

 

Call of Chaos 2018:

Before I wind up this post, let me quickly address the current Call of Chaos event over at The Bolter & Chainsword: With the forum back up and running, fortunately enough, I think I’ll just have a go at joining in the event again this year. Here are the models I think I’ll be pledging as my Call of Chaos vow:


Including the second Armiger is a bit of a no-brainer, obviously, as I really want to have the happy family finished before the year is out ๐Ÿ˜‰ In addition, I want to get some paint on two Nurglite characters that have been sitting on my desk for ages:

First up, a Nurglite Lord on bike that was built over a year ago (originally for another forum painting event last year):

Still pretty happy with this guy — you certainly wouldn’t think he started out as a Ravenwing biker from Dark Vengeance, would you? ๐Ÿ˜‰

And there’s this conversion of Maxime Pastourel’s Lord of Contagion model from the Dark Imperium boxed set:

his guy should be fun to paint, with all the gribbly areas of distressed skin and gooey intestines ๐Ÿ˜‰

 

So anyway, that’s it for today’s update. It goes without saying that I would love to hear any feedback you might have! And, as always, thanks for looking and stay tuned for more! ๐Ÿ™‚

Advertisements

A Child for the Warrior King, pt.5

Posted in 40k, Chaos, Conversions, WIP, World Eaters with tags , , , , , , , , , , , , , , , , , on September 24, 2018 by krautscientist

Hey everyone, with the annual Call of Chaos event (over at The Bolter & Chainsword) upon us, I thought it was time for a rather more chaotic update this week. Because I have had a bit of a breakthrough with my second Armiger Warglaive – and the second member of Enkidu Lance, Baron Harrowthorne’s retinue – this past weekend.

Just to remind you, here’s my previous Armiger from earlier this year:


You can read up on the model in more detail here.

So of course I still wanted to complete the second child of the warrior king. Unfortunately, not much really happened with the model for a rather long while since the last WIP pictures I shared with you.

The main reason for this was that I lacked some parts I thought were crucial for the conversion: Having discovered how well Bloodthirster vambraces work as leg armour for Renegade Armigers, I definitely wanted to feature this element on my second Armiger as well, but I just couldn’t get my hands on another set of the bitz, which also pretty much blocked any further work on the model.

But last week, thanks to theย  awesome generosity of fellow hobbyist ElDuderino, I received a bitz drop that contained some of those ever important vambraces, and this provided me with the motivation (and the bitz!) I needed to hammer out most of the conversion over the weekend. So allow me to share my progress with you:

Here’s where we left off last time:

Promising, but nothing to write home about yet. So the first order of business was to nail down a pose for the Armiger. And after a bit of hemming and hawing, here’s what I came up with:

It’s really just a subtle tweak of the standard Armiger leg pose, which is very narrow and makes the model look as though it were marching straight forward. By attaching the legs at a slightly different angle (and cutting off the nubs that look the feet in place, allowing for a bit more flexibility), I have widened the stance just a bit, making it look slightly more aggressive while also creating a pose that could be interpreted as the Armiger bracing for firing its harpoon.

I’ve set myself a bit of an overarching visual framework for both Armigers in that I want both models have their own personality while also featuring a fair number of recurring visual elements between them, in order to show how both machines (and their pilots) are still retainers – and, ultimately, subordinates – to the same renegade noble.

So when it came to featuring some recurring models, I basically copied most of the armour from my previous model, especially the shin armour and Khornate icons (the trophies and spikes I add to the carapace will also follow a similar design, while still allowing for some individuality).

Anyway, here’s what the second Armiger currently looks like:

On the model’s left arm, you can see the Ursus Claw harpoon I converted (some detailed conversion notes can be found here):


As for the gun arm, I felt tempted to go with an original, kitbashed weapon for a while, but then ultimately decided to use yet another of the Forgefiend’s ectoplasma cannons: They work really well on an Armiger, for one, and provide some instant “chaotification”. And it also makes sense for both models to be armed with the same gun, seeing how there’s really only one wargear template for Armiger Warglaives so far, especially when it comes to their guns. Oh, and the ectoplasma cannon bit will also allow me to paint some plasma coils again, which is always a plus ๐Ÿ˜‰

One small complication was that I had to replace some of the cabling on the gun, because I had cut it off earlier (for a different conversion), but I think I have managed to come up with a look that works.

 

So there are definitely enough shared elements between the two models to tie them together from a visual standpoint. But at the same time, I also wanted each model to have its own personality and, by the same token, have the Armigers reflect the personality of their respective pilots:

With the Hound, I imagine its pilot as a former member of a loyalist Knight household who was forced into rebellion when the Forgeworld protected by his house seceded from the Imperium. He eventually found his way into Baron Harrowthorne’s lance, as part of the World Eaters’ 4th assault company, but when all is said and done, he still subscribes to the traditions and trappings of knightly houses, which also shows on his Armiger (the fairly standard armament, the banner listing the pilot’s accomplishments,…).

This second Armiger’s pilot (codenamed “The Huntress” for now), on the other hand comes from a more techno-barbarian-styled background, as a member of a slightly more feral warclan. Now her homeworld may be a Dark Mechanicum Forgeworld or a former Knight world, but it has been in the clutches of the ruinous powers for far longer, and this shows in her warlike disposition as well as the somewhat more feral look of her machine. For this reason, I chose a slightly more brutal looking armour plate (from the vintage Bloodthirster) for the space between the legs in place of the – more traditional – banner. I also added a huge spike to the right pauldron (for a slightly more gladiatorial look). At the same time, I think the more open, threatening pose also does a nice job of hinting at a less restrained, more openly aggressive personality for the pilot.

So when you place the two Armigers next to one another, there’s a lot to tie them together, but also a slight difference in look, which is exactly the effect I was going for:

And while we are already speaking of the pilots, I also made some tweaks to my model for “The Huntress”, of course:



While the basic kitbash already worked fairly well last time around, I now had to clean it up and make sure the model actually fit into the interior even when the carapace was placed on top and locked in place. I also tried to make her pose look similar to that of the first pilot, mostly in order to hint at the underlying way in which an Armiger is piloted.

I also added some bitz and bobs that few people will ever notice once the model is glued in place: There’s a small chaos icon dangling from the model’s belt, and also a skull shoulder pad that nobody is ever going to see ๐Ÿ˜‰ I also added a jagged tooth worn as a necklace to hint at the Huntress’ more tribal/techno-barbarian background.

And once again, getting it all to fit together really took some doing ๐Ÿ˜‰

So with most of the heavy lifting out of the way, the rest of the conversion will be mostly about two areas: There’s some gap-filling and a bit of extra detailing to be done in the cockpit area. The biggest part still left will be the detailing of the carapace and armour plates, including the placement of trophies and spikes, grafting some teeth to the armour trim here and there, and adding some battle damage to match the look of the Bloodthirster vambraces.

For now, however, I am fairly happy with the look of the model — and with finally having managed to get this project under steam again, mostly thanks to ElDuderino. Cheers, mate! ๐Ÿ™‚

It goes without saying that I would love to hear any feedback you might have! And, as always, thanks for looking and stay tuned for more! ๐Ÿ™‚

A Child for the Warrior King, pt.4

Posted in 40k, Chaos, Conversions, WIP, World Eaters with tags , , , , , , , , , , , , , , , , , , , , on August 9, 2018 by krautscientist

Hey everyone, I hope I won’t bore you to death when I stay on the topic of converted Armiger Warglaives for yet another post — bear with me, as there are some news to be shared ๐Ÿ˜‰

First of all, my finished Renegade Armiger, discussed in detail last week, not only served as an entry for Azazel’s Jewel of July challenge and as my vow for this year’s ETL VI event over at The Bolter & Chainsword — he also actually managed to win me win me a Badge of the Artificer during the latter, making the Hound one of this ETL’s standout models, which I am actually very happy with!

You see, given the incredible output by some fellow forum members – and also my own lazy pace of painting – it was always clear that I had no hope of ever winning any kind of award based on the amount of painted models. But the Badge of the Artificer is based on the ‘Wow-effect’ of individual models or vows, independent of their points worth, and I will admit that I’ve been gunning for that badge for a while now, and achieving it with a model that I am still pretty darn happy with definitely feels great!

In celebration, have a look at the snazzy photo montage I have created for the “Master Artificer” poll that will go up over at The B&C in the near future (EDIT: It’s right here, in case you want to check out the fantastic models created by the other entrants):

That’s not the only Armiger-related news, however:ย  Since the heat in this part of the world has been almost unbearable for the last couple of weeks, and since I was still feeling a bit drained from the last paintjob, I limited myself to some light kitbashing, trying to come up with a cool angle for the second Renegade Armiger I still need to build: I decided to start with the parts of the model that would define its personality more than any other. Exhibit one, the face:

This time around, I didn’t want the head to look like a daemon face or another “classic” skull face, because that approach has already been sufficiently explored with the skull-like face on the first Armiger. I rather wanted to experiment with something that looks like a more robotic, mask like design that has had some elements grafted on to look intimidating and sinister, When building the mockup for the facemask, my inspirations were Biohazard’s attempt to channel Darth Nihilus’ facemask on his own Armigers, a couple of the creepier bug creatures I’ve encountered during my recent playthrough of Hollow Knight — oh, and if there was one direct visual influence, it’s Volund, a creepy automaton from ADB’s and David Sondered’s very cool webcomic series “The Road to Jove”:

Artwork by David Sondered

 

Artwork by David Sondered

 

So with those sources of inspiration in mind, here’s what I have come up with:


As you can see, it’s a more robotic – almost insectile – look. The one thing I am not sure about is whether or not to use the lower jaw: On the one hand, the head arguably looks even more like a creepy insect face without it. On the other hand, I rather like the way the jaw rounds of the design of the head (and ties back into a more classic chaos look).

Maybe it’s a decision I have to make once the head has been painted…

Here’s a – very early – mockup of the second Armiger:

The interesting thing about this model will be how much it resembles – or doesn’t resemble – the Hound: On the one hand, I do want the personality of the respective pilot show in the setup, pose and decoration of their Armiger to some degree, plus there also has to be a certain amount of individuality for the models to be suitably interesting. On the other hand, both Armigers are actually men-at-arms to Baron Harrowthorne and Gilgamesh, so I do want to have certain elements of uniformity as well. I imagine this whould be a fun balance to toy around with! With that said, this also means that the model can only really take shape once I’ve managed to get my hands on another set of Bloodthirster vambraces – or, failing that, vambraces from Skarbrand.

If anyone has those bitz and would be willing to trade, please let me know!!!

Oh, and I have also started with the assembly of the cockpit and the pilot — meet “The Huntress”:


I have wanted to add some kind of female character to my World Eaters ever since Lotara Sarrin turned out to be Betrayer’s best human character, and if I even needed any more persuasion, seeing Cheex’ fantastic female corsair captain, gave me the last little shove I needed.

I still had the face from one of the Coven Throne vampires – after cutting of her hairdo for my recent conversion of Countess Mandelholtz – and I combined it with a pilot hat from the Astra Militarum Sentinel — I think?! Anyway, the original face was carefully shaved off to make way for the female face. I think I may have to get rid of that small aerial over the right ear, though, as it probably doesn’t make a whole lot of sense…

As for the body, my original plan was to build the model around another sentinel pilot, but then I realised that the Genestealer Hybrid bodies make for rather perfect pilot suits — and the models are also slight enough in build to work as a female character wearing a somewhat bulky suit.

Of course having a mockup was all well and good, but I still needed to fit the model into the actual cockpit. This was easier work than last time around, however, as I already had a basic recipe in mind.

So here’s my mockup of the Armiger’s cockpit and pilot:



This is still early days, of course, and I mostly focused on trying to at least get all the elements that need to be present in there. On the finished build, the pilot’s left hand will be turned around, obviously, and the right hand will be gripping a control stick (to hint at the same kind of interface also visible on my first Armiger pilot).

But anyway, I think I may be on to something here — I would love to hear your feedback, of course, so feel free to leave me a comment!

And, as always, thanks for looking and stay tuned for more! ๐Ÿ™‚