Archive for tank

My first tank ever, pt. 3

Posted in 40k, Chaos, Conversions, paintjob, Traitor Guard with tags , , , , , , on October 10, 2012 by krautscientist

My first tank ever was pretty much completed but for a few last details. So let’s have a look at the finishing touches and then, in turn, at the finished model.

The first thing I had to do was build and paint a loading crew for the Basilisk’s rear platform. I thought about howto make these guys look suitably heretical and came up with the idea of combining a pretty standard human model with a hulking mutant carrying the shell to be loaded into the Basilisk’s main cannon.

The first guy was quite easily built. Take a look:


He was made from what I believe are mainly Catachan parts. I gave him a pair of kneeling legs, making him look like he was ready to begin loading the cannon. I also angled his head so he would look at his companion and give him orders.

And while we are on the topic, here’s the secon crew member:





As you can see, I defaulted back to my tried and true recipe of combining an Ork boy body with a totally different head – from the WFB Zombie kit in this case. The head makes the model look twisted and a bit dim-witted, which was exactly the look I was gunning for. I also added a few bitz to further obscure the model’s orky heritage.

The tank shell held by the model is an actual shell, by the way. I even added a small decal depicting a sigil of chaos, although a part of it unfortunately rubbed off when I placed the shell into the model’s hands.

Anyway, here’s the two models interacting with each other:


I also took the opportunity to add one more detail: a flag that had been collecting dust in my bitzbox for ages. Originally a standard for some old WFB Skeletons, I dug it up and added it to the tank as a small visual flourish.

Here’s a detail shot:



The flag itself was painted to look like it had been stitched together from human skin. The face came from an old plastic Chaos Warrior and was added by me. I used Tamiya Clear Red to dab on chaos insignia. I think this flag really gets across the point that these guys are in it for the evulz.

And that was pretty much it. The last thing I did was to use slightly thinned down Vermin Brown  to add patches of rust to the tank’s hull. It turned out that some of the rough spots on the chassis were really quite a boon, since they underlined the look of neglect and rust. I also used Mithril Silver to paint on a couple of paint chips and scratches here and there. Like with all weathering, it was important to know when to stop: I wanted my tank to look decidedly used, but also like it was still in reasonable working order.

And with that, my first tank ever was complete: Let’s have a big picture extravaganza to celebrate the occasion!










That’s the Basilisk from all sides. I think my Traitor Guard colour scheme worked rather nicely, if I do say so myself.

Here’s a couple of detail shots showing some of my favourite parts:

First up, the sides of the vehicle, complete with “aged” decals:



Like I’ve said before, I should definitely have added more kill marks 😉

Here’s then the front of the tank and tank commander….


…and, once again, the guys in the back:




Maybe I’ll be revisiting the back platform at some point, to add some additional ammunition.

And last but not least, let me wind up this post by showing you what may be my favourite detail: The little map I painted for the tank commander:


All in all, this project was a blast: Not only did I have lots of fun painting the tank, it may also have helped me to overcome my fear of painting tanks altogether — we’ll see once I decide to tackle the Rhinos, I guess.

As always, thanks for looking and stay tuned for more!

Advertisements

My first tank ever, pt. 2

Posted in 40k, Chaos, Conversions, Traitor Guard, Uncategorized with tags , , , , , , on October 5, 2012 by krautscientist

When we last laid eyes upon My first tank ever, I had managed to complete the conversion and undercoat the whole model with GW Chaos Black.

So there was no way around it: I had to start painting this thing. The largest paintbrush available to me (not a tank brush, mind!) in hand, I sat down and got to work:

Following a recipe I had found by sheer chance while browsing through old issues of WD, the tracks were basecoated in dark bronze (Vallejo Tinny Tin in this case, although you can rest assured that this wasn’t the colour used in GW’s original recipe…) and then drybrushed with GW Boltgun Metal. The result is rather nice in my opinion, and it’s definitely a very quick way of painting tracks without any washes involved!

I then used exactly the same base colours I use on my traitor soldiers: The tank’s chassis was painted with GW Adeptus Battlegrey, and I added GW Mechrite Red on the front third of the chassis. All metal parts were painted with GW Boltgun Metal. The skulls were basecoated with GW Dheneb Stone. Here’s what the model looked like at this point:


Before applying any washes or detailing whatsoever, I added a couple of decals. Doing this at this particular point was key, since it meant that I would be able to “age” and “weather” the decals along with the rest of the tank, making them look far more realistic:


A couple of heretic runes went on the right flank of the tank, while the fuel tank got a nice little warning sign.

I also added some kill marks on the tank’s other flank. Looking back on it now, five seems a little measly, doesn’t it? 😉

All the decals were treated with Vallejo Decal Medium, then Vallejo Decal Fix, and finally varnished with Vallejo Matte Varnish. It worked like a charm, making the decals look like they were really part of the tank.

While everything was drying, I began work on the tank commander, laying down base colours virtually identical to the rest of the tank.


I then used a mixture of washing and highlighting to further define the model. Of course I took extra care when working on the face. After the tank commander had been completed, he was glued into the hatch:


The head, in case you were wondering, was made by RSJake and can be bought in his webstore. It was, once again, kindly sponsored by Doombreed, and I thought it was just the perfect choice for a traitorous tank commander (going by the head, I highly recommend RSJake’s stuff: the detail and sculpt are both very nice!).

Anyway, with the tank commander completed, I more or less repeated the process on the rest of the tank: Wash everything liberally with GW Agrax Earthshade, then add Red Gore to the red parts of the chassis. Of course I also painted on some chaos iconography. I wanted it to look like it had been crudely dabbed on by the traitors. And so, after a short while, the tank’s main chassis was finished:




As you can see above, I also added small OSL effects to the chaos icon and sensor array at the front. Nothing too fancy, I just wanted to make those areas pop a little.

The next part I had been looking forward to: I basecoated the large blast shield protecting the loading plattform in the back. I had added a stylised daemon face from a WFB terrain kit which I painted and highlighted in bronze colours. The shield itself was painted GW Mechrite Red and then layered with GW Red Gore, just like the other red parts of the model.

The blast shield pretty much became a “blank canvas” at this point, awaiting further decoration. Take a look:


We’ll get to that in a minute. First, let’s talk about the rest of the model, though: The main cannon and loading platform were very easy to finish: I just painted them silver and then added weathering by washing with GW Nuln Oil or stippling on patches of rust.

I glued all the sub-assemblies together at this point. This is what the model looked like:



As you can see, I added further chaos iconography to the blast shield. I also used yet another OSL effect on the eyes of the metal daemon face. It doesn’t make all that much sense from a technical standpoint, but I think it looks rather cool:




I was already pretty pleased with the tank, although there were some things still missing: I wanted to add some smaller patches of rust and neglect all over the tank’s surface, but I had waited until the model was completely assembled, lest the effect turn out uneven.

The loading platform in the back of the tank was also woefully empty:




So the next stage would be to add the final missing details and to convert and paint the models loading the tank’s main cannon.

Next time on My first tank ever: final details.
Until then, as always, thanks for looking and stay tuned for more!

My first tank ever, pt. 1

Posted in 40k, Chaos, Conversions, Traitor Guard, WIP with tags , , , , , , , , on September 21, 2012 by krautscientist

To tell you the truth, I have been pretty afraid of tanks for a long time. Of building and painting them, that is.
With all the added size and detail compared to infantry models, and with the myriad of fantastically detailed and expertly weathered IG tanks out there, I always felt rather apprehensive about the prospect of having to get a tank finished one of these days — which may just be the reason for the fact that neither of my Chaos Space Marine Rhinos has seen a speck of colour so far…

But then, my eye was repeatedly drawn to a half-built Imperial Basilisk in my dear cousin Andy’s collection. He had bought the tank quite a while ago for some project or other and then probably lost patience with the thing. And now it sat there, half-finished, in a box. And I couldn’t stop thinking about what an interesting modelling project it would be for my Traitor Guard.

Fortunately, cousin Andy let me have the remains of the Basilisk — probably to stop my constant whining. And so, one sunny afternoon, I sat down to cut my teeth on my first tank ever. So this post (and its sequels) will detail my first experiences in the wonderful world of mechanised firepower 😉

Here’s the Basilisk, pretty much the way it came to me:


As you can see, cousin Andy had fortunately already constructed the tank’s main chassis, so that work was already taken care of.



The downside to this was the fact that some parts of the model were in a rather rough condition. The tracks were also only half-finished, with some parts missing and others already glued in. With the instruction sheet lost a long time ago, I had to painstakingly “reconstruct” the threads — luckily, I had enough spare parts, but the results (as seen above) were not as flawless as I would have liked. But all in all, it was pretty smooth sailing nonetheless.

After the tank’s main body had been completed, it was time to think about the additions I wanted to make to the model. After all, I wanted this to be a traitor tank, a part of the ruinous powers’ forces. So I dove headfirst into my bitzbox and collected all kinds of possible parts:

Here’s a cookie tin filled with the bitz I thought could come in handy for this project:

And here’s an early mockup of my tank commander. It’s basically a regular Imperial tank commander with a special head. I’ll tell you more about it once we are dealing with the different painting stages…


It would have been easy to go totally overboard with the spiky bitz, so I tried not to make that mistake. I did have to use some chaos bitz to replace some original parts that were missing, though (the handrail in the back, for example). Anyway, a relatively short while later, the basic build of the Basilisk was completed:




I also did a first mockup of my loading crew, although I realied that these guys would only realistically be tackled much later:



So after dryfitting everything and cleaning up the conversion, I disassembled the model again. Here are all the sub-assemblies ready for undercoating:


I spraypainted everything using GW Chaos Black, and so half an hour later, the tank was ready for painting:




At this point, I was actually giddy and afraid in equal parts. Would I be able to do this model justice with my paintjob? We’ll find out, in the next installment of “My first tank ever”

Until then, as always, thanks for looking and stay tuned for more!