Archive for slaughterpriest

Lord of the XII Legion – A Triptych, pt. 7

Posted in 30k, Conversions, Fluff, paintjob, WIP, World Eaters with tags , , , , , , , , , , , , , , , , , , , , , on April 14, 2017 by krautscientist

The Night of the Wolf

Lhorke never saw who fired the first shot. In the decades to come, the World Eaters claimed it came from the Wolves‘ lines, and the Wolves claimed the same of the XII Legion. He had his suspicions, but what was hindsight in the face of catastrophe? Without either primarch giving an order, two Legions fought.

The Night of the Wolf, they’d called it in the years since. Imperial archives referred to it as the Ghenna Scouring, omitting the moment the World Eaters and Space Wolves drew blood. A source of pride for both Legions, and a source of secret shame. Both claimed victory. Both feared they’d actually lost.

Aaron Dembski-Bowden, Betrayer

 

So I really wanted to complete my most recent converted version of the XII Legion Primarch as soon as possible — and as part of the Loyalty And Treachery III event over at The Bolter & Chainsword, no less, which left me with a fairly tight deadline. But then the model was already pretty much finished, wasn’t it? Here’s where we left off last time:

But I wasn’t perfectly happy yet and thought the model needed some final tweaks before it could be painted. So I gave it another round of conversion touchups:


A rather simple addition was the tangle of viscera Angron is holding in the Wayne England artwork that inspired the conversion: It was simply created with two Skaven tails and a bit of stringy glue.

However, there remained another, more substantial addition to complete, and no, don’t worry about the tinfoil on his shoulders: The XII Primarch wasn’t about to get some super tacky coloured hairtips. Rather, I used the tinfoil as a base to build up his cape with some extra GS on top of it:


I wanted Angron’s cape to have a bit more volume and look less like a tacked-on bit, so GS really was the way to go here. At the same time, I really wanted to keep the cape and body as separate parts during the painting progress. So the little trick I came up with was to carefully push some tinfoil down onto the model’s shoulders. Since the foil can be bent to conform to a certain shape, there’s really no need to glue it to the model or attach it otherwise, provided you are careful enough. Yet it will also “insulate” the surface of the model against bonding with the GS added on top, making it easy to take the sub-assemblies apart again. Granted, it would have been even easier had I attached it to something solid. The pauldron’s weren’t glued in yet, however, and so the whole thing turned a bit more finicky than it needed to be. But it worked rather nicely for getting the structure of the cape in place!

As for building up the actual fur on top of the cape, Capt. Jack’s fur tutorial was really invaluable! I tried to adapt it as best I could to my inferior skills. And where that failed, I used an old toothbrush to create some extra texture. Which led to this result:





To show you what’s happened under the hood, so to speak, here’s another look at the GS’ed shoulder area:


And here you can see how the body and cape were still separate pieces at this point, making for much easier and more exact painting:


So just one last step before everything was ready for painting: I had to build the right base for Angron. Now I believe I already mentioned earlier how a sentence from Betrayer provided me with the right context for the model:

In those early years, Angron carried his first axe, the precursor to all others. He called it Widowmaker. It would break this day, never to be used again.

This sentence appears in the description of the event called “The Night of the Wolf” — and everything just fell into place: Why not imagine that my converted model, still wielding the iconic, two-handed axe with the wing-motif from the Wayne England illustration, represented Angron during that fateful night at the tail end of the Ghenna compliance?

Which meant that I needed a fallen Space Wolf — also the owner of that lenght of gut Angron’s clutching in his left fist, incidentally…

A short while later, I had come up with a fitting base:


So with everything in place, it was time to get some paint on the model, and this made me slightly nervous: Not only did I want the model to end up as cool as possible, but this version of Angron was also supposed to serve as a “test run” for when I finally paint the Forgeworld Angron Adam Wier sent me. So I did some research on possible recipes, especially for Angron’s armour. And while I initially thought about merely copying GW’s “official” Custodes colour scheme, I eventually decided on something more bronze and brass than gold, because it just seemed more appropriate for the character (and visibly distanced him from the Emperor’s closest servants who all wear gold). In the end, I discovered ApatheticFish’s painting tutorial and followed it to the best of my ability, and it really clicked for me!

So here are a couple of pictures illustrating the painting process:

First up, Angron with his armour mostly painted, but without his pauldrons:


This picture is interesting because it shows how wonky the model seems without the shoulder pad. It also reveals  the ugly truth of what I had to do to make everything fit together — I am just glad that the pauldrons neatly covered the whole mess up when they were back in place:


In order to add some structural stability to the whole assembly, I painted the base next (then attached the model to it):



Alas poor Hjortulf, we barely knew ye… (trying my hand at the Space Wolves’ Heresy era colours was kinda fun, though!)

So here’s the model with the cape and some detail work left to sort out:



And while the model’s back would end up being almost completely covered by the cape, I did of course completely paint it. Here’s a photo serving as proof that I didn’t skimp on my homework:


So just one final push, and the model would be finished! Fortunately enough, I had a scheduled painting session together with my good friend Annie coming up anyway, so I used this as the perfect opportunity to add a lot of small tweaks and finishing touches and complete Angron’s cape.

And so let’s look at the finished model. Keep in mind that this was the piece of artwork that inspired the conversion in the first place. A fantastic piece by the late, great Wayne England:

Angron by Wayne England

Incidentally, I only found this zoomed-out, higher quality version of the picture when the conversion had already been finished: So there are skulls in that tangle of gore in Angron’s fist — who woulda thunk, huh? 😉

Anyway, without any further ado, here’s the XII Primarch:


Angron

The Conqueror, Primarch of the XII Legion

„I am loyal, the same as you. I am told to bathe my Legion in the blood of innocents and sinners alike, and I do it, because it’s all that’s left for me in this life. I do these things, and I enjoy them, not because we are moral, or right – or loving souls seeking to enlighten a dark universe – but because all I feel are the Butcher’s Nails hammered into my brain. I serve because of this ‚mutilation‘. Without it? Well, perhaps I might be a more moral man, like you claim to be. A virtuos man, eh? Perhaps I might ascend the steps of our father’s palace and take the slaving bastard’s head.“

The Primarch Angron to his brother, Leman Russ
from Aaron-Dembski-Bowden’s Betrayer








Okay, guys: Now I do realise that I might have a tendency to be a bit too much in love with my own work, but I have to admit that I am really, really happy with this model! Are there things I could have done better? You bet! The fur on the cape is probably not as good as it could have been. Using a flesh shade for the shadows on the armour didn’t work out quite as well as I had hoped.

But all in all, he really reads as a believable version of Angron to me, and that makes me very happy, indeed! I am also rather pleased with the way his armour has turned out, and if I have one actual regret right now, it’s that the metal looks a bit too flat and monochromatic in the photos, because it works so well in real life — seriously, this guy sparkles from a couple of feet away 😉 I shall endeavour to take some better pictures that actually show off the armour a bit better.

For now, another detail shot at how the Butcher’s Nails, the armour and the partially sculpted cape come together:


And what makes this even sweeter is that the completion of Angron also marks the completion of my vow for the aforementioned “Loyalty and Treachery III” event. I have managed to complete four models I am really pleased with and really nailed down the look I want for my 30k World Eaters:

In addition to Angron, find my detailed thoughts on the rest of the models in the following posts:

And when looking at the bigger picture, I have also come one step closer to completing my fourth (and likely final) incarnation of the XII Primarch. Here are my two converted, Slaughterpriest-based versions of Angron:


So this means two down, one to go:

And finally, Angron among his sons (the meagre extents of my 30k collection so far):

I would love to hear any feedback you might have! And, as always, thanks for looking and stay tuned for more!

Lord of the XII Legion – A Triptych, pt. 6

Posted in 30k, Conversions, Fluff, WIP, World Eaters with tags , , , , , , , , , , , , , , , , , on March 8, 2017 by krautscientist

Wait, what? We’re back to this guy again?

Indeed, another post focused on the XIIth Primarch, Angron Thal’Kr, The Conqueror, The Red Angel. So what’s up today?

You all know that building different versions of Angron was a pretty big part of my 2016 hobby life: I built and painted a version of Angron in his daemonic form, something I wouldn’t even have thought myself capable of a few years ago:

But I also went back to Angron’s past, converting a version of him inspired by this piece of artwork, probably showing the Primarch during his pitfighting days on Nuceria:

Butcher's Nails cover artwork
It turned out that one of the AoS Slaughterpriests of Khorne makes for a pretty convincing Angron, with a couple of tweaks:

angron-thalkr-lord-of-the-red-sands-11
So there was only one last planned model: The “official” Forgeworld Angron very kindly sent to me by Adam Wier. So just get that one painted and we’re done, eh?


Yes, well. It all ended up being a bit more complicated than that…

Here’s what happened: When White Dwarf was relaunched as a monthly magazine, the first issue came with a free Slaughterpriest — incidentally, the design I hadn’t used for my Angron conversion. And at the same time, I had also picked up the same version a bit earlier, when my beloved FLGS went under (still sore, you know).

So I ended up with a spare Slaughterpriest. And I started thinking. What if I were to build…just one more…?!

So yeah 😉

In order to come up with a model that wouldn’t just be a retread of the versions I already had, I thought it would be fun to base this next Angron on the pre-Forgeworld era artwork, such as the iconic illustration of Angron created by the late, great Wayne England for the Horus Heres Trading Card Game:

Angron by Wayne England

And, of course, on the similarly iconic illustration by John Blanche:

Angron by John Blanche

In the era before Angron actually had a dedicated Forgeworld model, there were a couple of elements that appeared in almost every piece of artwork. Most of these were later incorporated into Simon Egan’s model, but some fell by the wayside. Such as the two-handed axe with the ornamental wing and the three spikes crowing Angron’s collar. And of course there’s a certain, stylised and angular charm to Wayne England’s piece of artwork above that would be fun to reproduce.

So I started messing around with a couple of bitz, and I’ve actually already shown you the first attempt at this new model a while ago:


But while this guy already looked pretty cool, he didn’t actually read as Angron all that much — at least not in a way that moved beyond what was already present on the other versions in my possession. And since the model just didn’t come together for one reason or another, I just set him aside for a while.

Until I found myself playing around with some of the new plastic Custodian bitz last week, and suddenly it seemed like I might have the solution on my hands! So after some rigurous cutting, here’s what I ended up with:


Whoa, much better, wouldn’t you agree? Replacing the entire torso with that of a Custodian might seem like a rather radical approach, but it instantly moved the model a lot closer to the artwork that inspired it! And I was able to keep the versions of the previous version that already worked well enough — such as the arms and legs. And, of course, that brilliantly sculpted Slaughterpriest face (that just happens to instantly turn into Angron as soon as you add some cabling).

However, I wasn’t quite there yet: The Khorne icon on Angron’s belt buckle needed to be replaced, for fairly obvious reasons, and I also made some minor tweaks to the pose. Which led to this:




A Custodian tasset served as a pretty good replacement for the Khorne symbol and also recalled the aquila symbol appearing in the aertwork.

Almost there! I did feel the model needed a bit more presence at this point to really read as a Primarch, though. And the collar around Angron’s head wasn’t quite as prominent as in the artwork — it just turned out that fitting all that cabling in there made the entire ensemble a bit less striking than I had hoped:


Good thing, then, that the next addition was really a bit of a happy accident: I always knew that he’d be getting some kind of cape, so I fooled around with a couple of different options. And the solution arrived from the unlikeliest of places, i.e. the cape that comes with the Chaos Terminator Lord kit. With a bit of cutting and fitting, it ended up working very well, plus the cape also gave me the chance of incorporating those three spikes that are another staple of Angron in the classic artwork:





The cape also adds the right sense of bulk: I already liked the model well enough before, but it now has the massive, overmuscled look that sells it as a Primarch, if you ask me. Granted, some fine tuning may yet be in order, but I think I’m on the right track!

Time for a comparison with the other versions of (pre-ascension) Angron in my collection:



Regarding the size of the model, it must be noted that FW’s Angron is still quite a bit taller — he only doesn’t look like it because he’s posed at a very low crouch. But even so, I think the three of them look fairly good together.

So I only made one last addition to the model. Here’s what the latest version of Angron looks like right now:



I’ve added two leather straps to either side of Angron’s chest, in order to add an element resembling the straps appearing in Wayne England’s illustration. They also happen to camouflage the slightly hokey joints where the arms meet the torso. And, once again, they add some more oomph to the model and its stature.

The model is pretty much finished at this point, except for a finishing touch or two: I want Angron to be holding the same tangle of viscera he has in the artwork in his open left hand. And there needs to be something underneath the Primarch’s right foot. Incidentally, this also ties into the question of where my newest version of the XIIth Primarch fits into the timeline:

I see this version of Angron as a depiction of him about halfway through the Great Crusade, shortly before or during the event known as The Night of the Wolf (an event where the XII and VI Legions actually came to blows over Angron’s order of outfitting his legion with the Butcher’s Nails, thereby turning the legionaries into bloodthirsty madmen): There’s a throwaway line in Aaron Dembski-Bowden’s Betrayer about the first and greatest of Angron’s two-handed axes, Widowmaker, being broken and discarded at the end of that battle, so it would be fun to imagine my new version of Angron in that context.

Which is why there’ll probably be a suitably mangled Space Wolf underneath his foot — at least the XIII Legion is off the hook, for once… 😉

One last interesting detail about the model is how the shoulder pads (from MaxMini, I believe) were originally used as a mere stopgap solution, but I really rather like the way they look: They have a certain gladiatorial flair, plus the pteryges on the sides basically perfectly match the ones in the Wayne England illustration. And what’s more: Through sheeer coincidence (or maybe through intervention from the powers of the warp, who knows…) all three converted version of Angron I have built so far have ended up with shoulder pads that were originally sent to me by Augustus b’Raass as part of a bitz drop — that in itself would be enough reason to stick with those shoulder pads, wouldn’t you agree?

 

Anyway, I am pretty happy that the model has finally come together like that! And just when I thought I finally had all the Angrons I needed, I stumble upon this little gem the other day and almost find myself reaching for my AoS starter box sprues…damn!

Anyway, I would love to hear your feedback! And, as always, thanks for looking and stay tuned for more!

The State of the Hunt — Week 50

Posted in 40k, Chaos, Conversions, paintjob, state of the hunt, World Eaters with tags , , , , , , , , , , , , , , , , , , , , , , , , on December 17, 2016 by krautscientist

Only a short update today, mostly because it has been one hell of a week, due to a ridiculously important deadline at work. Still, there are two news items I would like to share with you, so let’s take a look at the current State of the Hunt:

 

I. Return of the Chibi-Knight!

Some of you might remember that, back when I built and painted my Renegade Knight, Gilgamesh, I also included a roughly Epic 40k-scaled version of the same warmachine in the project as an added bit of fun. I dubbed it the “Chibi-Knight” back then:

Chibi-Knight Gilgamesh (1)

Now cobbling together a – pretty faithful – smaller version of the Knight was a very entertaining, if fairly involved, endeavour. But I didn’t really consider doing it again.

Enter fellow German hobbyist Helega, who helped me out with several really spectacular bitz drops this year. For instance, he provided the chain cape I used to replace the missing cape on my Forgeworld Angron. Anyway, Helega asked me whether I could build another Chibi-Knight for him, and while I knew this would mean some fiddly work, there was really no way I could turn down the request. So I tried to reverse-engineer my original kitbashing process and make another copy.

As an added twist, Helega wanted his Knight to be the loyalist version, so I had to account for that during the building process. There was also no way I would be able to cover up dodgy areas with spikes and baroque decorations this time around 😉

I started by putting together the same basic assembly I had used last time: CSM Raptor legs (chosen due to the separate feet, and because the lightning bolt decoration works both for chaos and for Great Crusade era Imperial machines, a Space Marine Terminator torso and a Dreadnought shin guard:

chibi-knight-mk-ii-1
chibi-knight-mk-ii-3
Instead of last time’s Raptor pauldrons, I ended up using some Chaos Marauder shoulder guards, and they arguably worked even better, making the torso look really familiar to that of GW’s stock Imperial Knight. I also found out that one of the ancient plastic chaos warriors’ helmets looks almost exactly like one of the face masks that come with the Knight kit.

So I knew I was on the right track, but this is where the fiddly work began: I painstakingly spliced together the Chibi-Knight’s feet using the hook bit from the CSMvehicle accessory sprue, and I once again tried to create weapon arms that were as close as possible to those of the 28mm version.

Helega told me he wanted the Knight to be armed with a gatling cannon and power fist, so I took a long hard look at the Imperial Knight Warden and worked from there:

28mm-imperial-knight-warden-1
And after a lot of messing around with various bitz, this is what I came up with:

chibi-knight-mk-ii-8
chibi-knight-mk-ii-10
chibi-knight-mk-ii-13
chibi-knight-mk-ii-14
chibi-knight-mk-ii-17
Here’s a side by side comparison showing the weapon arms of the big version and my “chibi-versions” of the same weapons:

Power Fist:

28mm-imperial-knight-warden-1
chibi-knight-mk-ii-9
Gatling Cannon:

28mm-imperial-knight-warden-2
chibi-knight-mk-ii-11
Not a 100% perfect match, maybe, but certainly reasonable enough, given the difference in scale! 😉

So here’s what I packed up and sent to Helega:

chibi-knight-mk-ii-7
As you can see, I have left the part in several sub-assemblies. This should make for easier painting, plus it’ll also allow Helega to tweak the pose according to his wishes. I have also included an alternate head and a bit that could serve as the carapace-mounted missile launcher.

So yeah, another Chibi-Knight finished! Here he is, next to Chibi-Gilgamesh:

chibi-knight-mk-ii-18
The new version is arguably even slightly more elegant a conversion than my first attempt in several respects 😉

Anyway, I am really happy with the finished conversion, if I do say so myself, and I hope Helega will be happy as well! As far as I know, the Knight will be painted in either Death Guard or Dusk Raiders colours, and I am really looking forward to seeing the finished model!

chibi-knight-mk-ii-15

 II. Getting to the finish line — but only just barely…

In other news, I am happy to report that I did manage to finish my vow for the Call of Chaos event over at The Bolter & Chainsword — even if it didn’t look like I would be successful for the longest time.

Earlier this week, I found myself with two models yet to finish for the vow and virtually no painting time to dedicate to the task. So I was basically prepared to call the endeavour a lost cause when a last minute pep-talk from fellow hobbyist Augustus b’Raass brought me back on track.

So I basically put in every waking hour of leisure time I had this Tuesday and completed the last models for my vow — at 2.30 in the morning 😉

Anyway, here’s a look at all the completed models:

finished-call-2016-10
Rest assured that we’ll be taking a closer look at these guys pretty soon. And starting next week, it’s also time for the annual Eternal Hunt Awards, I believe… 😉

But that’ll have to wait for a couple of days. For now, let me know what you think! And, as always, thanks for looking and stay tuned for more!

The State of the Hunt — Week 44

Posted in 40k, Chaos, Conversions, Fluff, paintjob, state of the hunt, World Eaters with tags , , , , , , , , , , , , , , , , , , , , , , , , on November 1, 2016 by krautscientist

Hey everyone, I’ll be at a conferece for most of the week, so this week’s post is basically a recap of things I am currently working on. Hopefully you’ll still appreciate the glimpse at my chaotic workshop 😉

I. Iron and mud

So first up, a small update regarding my ongoing work on my Call of Chaos vow: I already showed you a mostly completed Iron Warriors Apothecary directly after my recent vacation, but back then the model still needed a suitable base. And while I realise I have been taking my sweet time with this, I really wanted to make the base suitably interesting — I’ll let you be the judges as to whether or not I have suceeded with this.

So, without further ado, I give you Apothecary Phastos of the Iron Warriors:

apothecary-phastos-of-the-iron-warriors-1
apothecary-phastos-of-the-iron-warriors-2
apothecary-phastos-of-the-iron-warriors-4
apothecary-phastos-of-the-iron-warriors-3
Like I said, I wanted to include a little “special effect” on the base, both to support the model’s narrative and because I had pledged this guy as a “trophied” model for The Iron Without, a small Iron Warriors centered sub-event over at The Bolter & Chainsword’s Chaos forum.  So I placed a fallen Imperial Fist at Phastos’s feet, trampled into the mud underfoot:

apothecary-phastos-of-the-iron-warriors-6
What’s more, if you look really closely, you can see a telltale hole punched into the flex fitting covering the Astartes’ throat:

apothecary-phastos-of-the-iron-warriors-7
It’s where Phastos has just used his Narthecium gauntlet to extract his fallen loyalist cousin’s geneseed. After all, the Iron Warriors have been known to use other legions’ geneseed to create new legionaries — in fact, this little nugget of lore is the reason for having an apothecary as one of the character archetypes feature in my Killteam in the first place!

Beyond the aspect of adding to the model’s narrative, the base was also a chance of trying my hand at a new technique for the first time, because the Imperial Fist was created using a mold and some GS. Now I certainly don’t want to go crazy about copying huge amounts of stuff, but I thought it might be an interesting tool to make certain effects easier to achieve, and having a “standard” fallen Astartes template would have been pretty useful, plus I wanted the profile of the fallen Marine to be pretty flat without having to shave down 5mm of plastic. So here’s a quick comparison shot showing the “master” for the fallen Marine, the mold I made and the finished base:

iron-warriors-apothecary-base-wip-3
Unfortunately, the experiment was only partially a success, because the GS Marine ended up slightly warped and with softer details than I would have liked. Granted, my pathologic lack of patience might have had something to do with it as well. Anyway, I thought the poor guy was still good enough for a base — I had to pull off all kinds of tricks, however, to suggest depth where none existed.

All in all, I really like the finished model, though: It immediately reads as an Iron Warrior, and the cold and implacable feel of the model is arguably underlined even further by the tiny amount of bare skin visible on Phastos’ face. Plus I like the sinister implications of an Iron Warriors’ Apothecary harvesting the geneseed of the legion’s fallen enemies…

apothecary-phastos-of-the-iron-warriors-5
So regarding my Call of Chaos vow, this means two down, three to go 😉
I didn’t stop there, however, but made some time to rebase the other two power armoured Iron Warriors I had built and painted last year:

rebased-iron-warriors
I briefly considered leaving the guy on the left on his original base, seeing how he was just an early tester and will never be anything more, but in the end, it was only one more base, and I did go through the trouble of touching up the hazard stripes and decals on him when I painted the first “new” Iron Warriors last year, so it would have felt kinda wishy-washy to stop there 😉

The champ really profits from the added breathing space, though:

iron-warriors-champion-1
iron-warriors-champion-4
iron-warriors-champion-2
iron-warriors-champion-3
The whole business of rebasing these guys also led to the discovery of a very effective and quick recipe for duing muddy bases: Just cover the base in Vallejo’s Sandy Paste for a cery convincing surface texture, spraypaint with Chaos Black (once the paste has dried), cover with an even coat of Vallejo Charred Brown (or any suitably brackish colour you like, really) and finish the base by coating it in gloss varnish — done!

While I was at it, I also snapped some new pictures of Warsmith Greimolt Sturm:

warsmith-greimolt-sturm-of-the-iron-warriors-1
warsmith-greimolt-sturm-of-the-iron-warriors-2
warsmith-greimolt-sturm-of-the-iron-warriors-3

So yeah, that’s the whole (albeit small) IV Legion collection I own so far:

iron-warriors-killteam-wip-5

II. What’s in a name…?

Some of you probably still remember the models I painted for the ETL V event earlier this year: Among those models was a converted Kastelan Robot turned into an engine of destruction by the 4th assault company’s Master of the Forge, Lord Deracin.

However, back when I painted the model, I did not yet have a detailed idea about its possible background, and the poor guy didn’t even have a name. Thanks to the suggestions of my readers, however, this sad state of affairs is now at an end: Thanks to the suggestion of Llamahead, the converted Kastelan henceforth belongs to the “Confractura-pattern”. Now my Latin has grown a bit rusty, but I understand Confractura means “Breach” — which seems like a rather apt designation, given the fact that the robot is wielding a massive hammer 😉

But wait, there’s more: Thanks to an exchange of ideas, the machine also has an excellent little background vignette telling its story, courtesy of fellow hobbyist Inquisitor Mikhailovich (cheers, buddy!). Enjoy:

Khornate Kastelan conversion (11)
Brazenskull, “The Crimson Destroyer”, Confractura-pattern battle Automaton

Monger had been proud of the weapon.

The fact that the task of restoring such an ancient and powerful relic had been entrusted to him was, in his mind, a higher honour than even his elevation to the Deathwatch had been. If anything exceeded his elation at receiving the task, it had been his pride at his success.

Monger knew that becoming an Astartes, for all the honour it represented, was to be denied many of the emotions experienced by mortal humans, and yet when the machine finally woke from its eons long slumber for the first time, when it took its first halting steps after millennia of inaction, his joy was not entirely unlike what a proud parent might feel. And when its updated combat protocols first outclassed those of the combat servitors he tested it against, his was not only the pride of a tutor, but also the terrifying satisfaction that only an engineer of death could feel.

When it took to the battlefield for the first time, he felt a mix of all those emotions, as the child of his mind shredded Tyranic opponents for the first time on the plains of Ter’notha. On Veldictus it proved its worth when it routed the Cleansers of Ladon renegade Astartes in less than three days, tirelessly and furiously forcing them into retreat. When it finally fell against the monstrous World Eaters and could not be recovered, it had been mourned as a brother.

Now, however, the Tech-Marine felt an odd mixture of pride and, utter disgust. His machine had survived, exactly as he had planned it to. He recognised its reactions, its movements and attacks, even if its outer form had been terribly warped: Something had corrupted its noble adamantine shell. Like the Prodigal Son of legend, it had turned against its father.

The Marine braced himself as the machine charged him, sheathing his weapons and slaving his Servo-Arms to his mostly biological ones for enhanced speed. He barked curt orders to the Marines behind him – Wrecker, Pyro, Bookworm, and Archangel – his usual fiery voice replaced with the cold, hard steel one would expect from an agent of the Omnissiah. They obediently fanned out, retreating ever so slightly.

Monger met his creation head on, clamping his mag-boot and bionic foot to the Necrontyr living metal beneath him. With flawless timing he clamped the rampaging machine’s powerfist in one Servo-Arm, its new and unrecognisable hammer arm in the other.

Like a giant contesting a god, he forced it to slow its charge.

He adjusted his grip so as to crush the smaller and more vulnerable wrist of its right hand, forcing it to drop the hammer.

“I would know how to bring you down better than anyone. Next time, don’t be so foolish as to attack me,” he spat, angrily, before calling into the Vox, “Wrecker! I need you and Archangel to coordinate a volley on the head, explosive shells, plasma discharge oh-point-six seconds ahead of frag cannon fire, three rounds, fourth with armour penetrating rounds. Pyro, disable the powerfist with your melta, Bookworm, try and knock out the leg servos. Fire!”

The squad’s weaponry was in motion before he’d even finished delivering the command.

The automaton’s head jerked to one side and Monger’s optics flared, trying desperately to make visual sense of the fireworks display happening less than two metres away. His right arm and slaved Servo-Arm slipped forward as the weapon they had clutched was expertly disintegrated from between its servo driven claws, and the machine fell to one knee, then both, held up by the one Servo-Arm that still gripped it.

Monger deactivated his direct control over the right Servo-Arm, returning it to a storage position, and drew his relic combi-melta. Without a word, he placed the barrel against the shattered remains of the machine’s featureless faceplate, and pulled the trigger, obliterating its entire head. Then he relinquished his grip entirely, letting the broken automaton fall to the ground.

He turned to his squad and silently gestured for them to move out before returning to the machine. He rolled it over onto its back and, pressing one hand to its chest, uttered a prayer, commending its machine spirits to the Omnissiah.

Then, without another backwards glance, he followed his squad. There were wars to be fought, and this was no longer one of them.

 

***

Huntmaster Deracin dropped to one knee with a snarl of servo-joints and the clinking sound of chains, taking in the mechanical corpse of the Crimson Destroyer before him, as the robed Forge Adepts scurried around him, beginning to search the scrap metal for salvageable components.
This was the work of a Tech-Marine. The damage to the right arm showed marks that could only have been left by a Servo-Arm, so that much was obvious. The head and left arm had been shorn off cleanly, obviously by a melta weapon, and the small craters at the knees were evidence of precision bolter fire, no doubt.

What little remained of Deracin’s organic features drew into a smile, even as his augmetic eye surveyed the destruction, a cold and detached part of his mind already taking stock of the damage and plotting out the necessary repairs. The Loyalists were always so hasty to pronounce a machine dead. But no, this one’s hunt was far from over.

One of Deracin’s clawed servo-arms brought the automaton’s cracked faceplate in front of his face, and his smile turned into a wolfish grin. This is where he would start. The test runs so far had been promising, but the conversion process would only be truly completed once the machine was granted a new face, in honour of its new master. He would craft a new visage for it, one that would remind the Loyalists that he was not so easily bested.

A face in the image of death itself.

 

III. Ooops, I did it again…

Before I wind up this post, allow me to share one last sneak peek at the latest conversion I am working on: This last weekend, I felt the need to build something, and I still had that free Slaughterpriest from WD knocking about, so this happened:

wayne-england-version-angron-early-wip-1
wayne-england-version-angron-early-wip-2
wayne-england-version-angron-early-wip-3
As some of you may already suspect, this will become yet another homemade version of Angron — whatever obsession with the Lord of the XII legion fellow hobbyist Reg is suffering from, I seem to have been infected with it as well!

Anyway, I am going for a model inspired by this piece of artwork from the late, great Wayne England:

Angron by Wayne England

Angron by Wayne England

Since I already have the stock Forgeworld model wielding Gorefather and Gorechild, it made sense to go for a version with the two-handed axe that appears so often in the classic artwork, such as the one shown above, but also in what is probably the oldes sketch showing Angron by none other than the legendary John Blanche:

Angron by John Blanche

Angron by John Blanche

The “winged” axe is also a part of my Daemon-Primarch version of Angron, as you will probably remember, so this should make for a nice visual shout out.

The model is still a very, very early WIP at this point, however, so it’ll be a while before we can consider this chap finished. But in any case, it seems like my series on building various incarnations of Angron will have to turn into a “quadtych”, after all — is that even a word…?

 

So yeah, I hope you’ve enjoyed this week’s look at my desk! I would of course love to hear any feedback you may have! And, as always, thanks for looking and stay tuned for more!

Lord of the XII Legion – A Triptych, pt. 5

Posted in Conversions, Fluff, paintjob, WIP, World Eaters with tags , , , , , , , , , , , , , , , , , , on September 20, 2016 by krautscientist

And so, after a short interlude, we are actually back to Angron: Today I actually intend to deliver on the “Triptych” part of this mini-series, as I show you my completed conversion of Angron in full-on gladiator mode, based on one of the plastic Slaughterpriest models. I already showed you the conversion in the very fist post of this series:

Angron WIP (23)

Interestingly enough, the other version of the Slaughterpriest – the one that was recently included as a pretty awesome giveaway with the first issue of the new White Dwarf – seems to be more more popular at the moment, and it would make for a pretty cool base model for an Angron conversion as well — but the original Slaughterpriest has that wonderfully angry face which made me think of Angron in the first place 😉

As a matter of fact, when I fist discussed this conversion, I completely forgot to mention another model that had been a huge inspiration for this project: PDH’s brilliantly disturbing “Pursser-Sin”, a true scale Emperor’s Children Marine he built for his excellent Slaneeshi INQ28 warband:

Pursser-Sin by PDH

Pursser-Sin by PDH

Peter just has an excellent eye for original conversions, and this one really made me consider using the Slaughterpriest as a Primarch model for the first time — of course there’s also the fact that his turning a Khornate model into a Slaneeshi dog is the biggest possible heresy, so I hope my Angron conversion balances this out a bit… 😉

But anyway, I was really itching to get my plastic Angron painted, so I jumped right in: The first step was to block out all the different basecoat colours:

30k-angron-conversion-pip-1
I decided to use the same recipe for bronze armour between this model and my Daemon-Primarch version of Angron, to create a bit of visual continuity between both models, so I used the exact same steps to paint the various parts of the armour.

The skin recipe is based on Rakarth Flesh as a basecoat — as are all my recipes for human skin. Since the model represents Angron in fairly healthy shape, however, I decided to make his skin look a bit healthier than the tone I usually use on my chaotic models. So I tweaked the recipe a bit, using the following steps:

  • GW Rakarth Flesh was used for the basecoat.
  • the entire skin area was then washed liberally with GW Ogryn Flesh (I loaded up on that wash while it was still available, although I imagine GW Reikland Fleshshade would have worked just as well).
  • the skin was then given a thin coat of GW Cadian Fleshtone for a slightly healthier look

At this point I already had a reasonably convincing flesh tone. However, I went one step further and used a mix of GW Carroburg Crimson and GW Druchii Violet to create shadows and distressed looking skin in select areas, especially around Angron’s cranial implants, around the metallic spine and on his “Triumph Rope” chest scar, giving these areas some extra pop.

Here’s the model with most of the paintjob already in place:

30k-angron-conversion-pip-6
I was definitely getting somewhere, but I wasn’t perfectly happy yet. So I decided to set the model aside for a moment and work on the base instead for a change of pace.

Since the model is supposed to represent Angron either uring his days as a gladiator on his “homeworld” Nuceria or during a sparring match in the Conqueror’s fighting pits, I really wanted the base to have the texture of a sany arena floor. In order to get the texture just right, I decided to try something new and picked up a pot of Vallejo’s Sandy Paste:

vallejo-sandy-paste
Going for a completely unfamiliar tool like this was a bit of a gamble, of course, but fortunately enough, the paste was extremely easy to work with: After getting an idea of what I was up against from this helpful YouTube tutorial, I was able to add it to the base and create the right texture using an old hobby knife. I also decided to add two discarded pieces of gladiatorial equipment half-buried in the sand. A shield from the WFB Vampire Counts Skeletons and a gladiator helmet from MaxMini that Augustus b’Raass had sent me a while ago provided the perfect pieces for the look I wanted. A part of the helmet was carefully shaved off to create a half-buried look. Both bitz were pressed into the still soft paste. Here’s what the base looked like after this step:

30k-angron-conversion-pip-2
30k-angron-conversion-pip-3
I also carefully pressed the model into the paste while everything was still drying, in order to create believable indentations in the sand around his left foot and the pile of skulls his right foot is resting on. Then the base was painted and the mostly finished model was glued to it before I tackled the finishing touches.

To be perfectly honest, there was a stretch during the painting where I wasn’t quite sure whether or not everything was really coming together. In the end, however, a couple of factors really pulled the various parts of the paintjob together:

  • I added some rather subtle blood spatter to Angron’s axes, his armour and to his chest and legs, making it look as though he had just messily vanquished a foe (or ten…). This really added that extra bit of realism to the model that I needed.
  • Once Angron had been glued to the base, his feet and the bottom of his loincloth were carefully drybrushed with the same sandy colour I had used for the base, and once again, this added some realism to the model and made it look more grounded.
  • And finally, the model really started looking like Angron once the trademark facial tattoos were in place: I even painted the markings around his eyes, even though I had been slightly nervous about that area beforehand.

So without further ado, here’s the second part of my Triptych about the Lord of the XII Legion:

 

Angron Thal’Kr, Lord of the Red Sands

angron-thalkr-lord-of-the-red-sands-11
“Come and die, dogs of Desh’ea! I am Angron of the pits, born in blood, raised in the dark, and I will die free!
Come, watch me fight one last time! Is that not what you want? Is that not what you always wanted?
Come closer, you dog-blooded cowards!”

Aaron Dembski-Bowden, Betrayer

angron-thalkr-lord-of-the-red-sands-1
angron-thalkr-lord-of-the-red-sands-2
angron-thalkr-lord-of-the-red-sands-3
angron-thalkr-lord-of-the-red-sands-4
angron-thalkr-lord-of-the-red-sands-5
angron-thalkr-lord-of-the-red-sands-6
angron-thalkr-lord-of-the-red-sands-7
Like I said on my previous post on the matter, the metallic spine doesn’t appear in the official fluff, of course, but is rather a feature of the Slaughterpriest model. But I really liked the disturbingly crude nature of it and thought it would perfectly match the brutally invasive style of the cranial implants Angron had received on Nuceria, so I decided to keep it. The same element also appears on my Daemon-Primarch version of Angron. Oh, and I made sure to make the skin on either side look suitably bruised and inflamed…

angron-thalkr-lord-of-the-red-sands-8
angron-thalkr-lord-of-the-red-sands-9
angron-thalkr-lord-of-the-red-sands-10
All in all, I am really vey happy with the finished model, and I do think the guy really reads as Angron now! To wit, here’s another look at that cover artwork of “Butcher’s Nails” that served as an important piece for reference during the painting process:

Butcher's Nails cover artwork
And here’s a closer look at the model’s face, an area that I am pretty happy with:

angron-thalkr-lord-of-the-red-sands-12
To allow you to accurately gauge the model’s bulk and size, here are some comparison pictures showing Angron next to…

…one of his power-armoured sons:

angron-thalkr-lord-of-the-red-sands-15
Forgeworld’s official Angron model, the still-to-be-painted third and final part of my Triptych 😉

angron-thalkr-lord-of-the-red-sands-14

…and finally, the three 30k World Eaters I have managed to paint so far:

angron-thalkr-lord-of-the-red-sands-13
So yeah, I am pretty happy with how the second part of this project has turned out! Two down, one to go — well, one and a half, really, because there’s also the rest of Daemon-Primarch Angron’s base left to finish, of course…

Before I wind up this post, allow me to point you in the direction of two related projects from fellow hobbyists. In both cases, I only discovered these models while I was already working on my own, but they are still fantastic alternate interpretations of the same character and archetype — and both happen to be based on the same Slaughterpriest model as well!

First up, there’s Calle’s Angron, a version that is pretty similar in approach to my own, but even more visceral:

Angron conversion by Calle

Angron conversion by Calle

Calle shared his model in the comments to one of my previous posts, but since I really love his take on Angron, I felt it definitely deserved a proper shout out!

And then there’s Reg, whose Daemon-Primarch Angron was instrumental for my own version. Now wouldn’t you know it, he seems to be at least one step ahead of me yet again, building not only another fantastic rendition of the big man himself, but also an entire gang of Angron’s Nucerian gladiator buddies as well. Nuts!

Angron and his gladiators by Reg

Angron and his gladiators by Reg

These are just incredible — I can’t even…
Now if Reg would pnly answer to the PM I wrote to him on Dakka…
Anyway, I am a huge, huge fan of these!

And so another post on the Lord of the XII Legion comes to a close. In closing, I have one final image to share with you, an impression of how Angron might have looked in the arena of Desh’ea. It goes without saying that I would love to hear any feedback you might have! And, as always, thanks for looking and stay tuned for more!

lord-of-the-red-sands-2