#HeroQuest2019: A Christmas Carol…of Undead Sorcery

Hey everyone, so here is my Christmas post for this year, and right in time for the festivities, no less. And I have prepared something for you that is at least a little heartwarming, as is only right and proper for this season.

Furthermore, one of my first hobby activities this year has been to return to the very beginnings of my life as a hobbyist and paint some old HeroQuest models, so it seems only fitting that one of the year’s last posts should also deal with the very same game — so what is this about?

Speaking of HeroQuest, you may have seen how my biggest ongoing hobby project this year was to paint an entire HeroQuest set, and for once I actually managed to go through with it. Ye Olde Inn, a forum dedicated to all things HeroQuest, became an indispensable part of this project, so when the forum ran its annual “Ye Olde Inn Christmas Exchange”, it was clear to me that I really wanted to participate, both as a small way of giving something back to the community, but also because I like events like this, where everyone builds a model and sends it off to somebody else.

So I really wanted to do something cool for the exchange! And this ambition doubled when I learned that my model would go to fellow hobbyist Weltenlaeufer whom I was happy to advise on painting his own HeroQuest models throughout the year. Now he had told me multiple times that he really liked my models, and flattery will, of course, get you anywhere with me 😉

But on a more serious note, this meant that there was a fairly good chance that he would like having a model built and painted by me in his collection — but I really wanted to give it my all and not just paint any old standard model (although “standard models” can be rather lovely when painted really well, as we will see later in this post).

Anyway, I reflected for a bit on what kind of model would be cool enough for this endeavour, and I settled on the closest thing the basic HeroQuest game system has to an arch-villain: The Witch Lord, as seen here painted by the great Les Edwards.

Illustration by Les Edwards

As I have already outlined before, I instantly fell in love with that illustration when I first saw it — enough so, in fact, that I used it as an inspiration when I finally built my own version of the Witch Lord earlier this year:

“So yeah, how about sending Weltenlaeufer a Witch Lord? That would certainly be cool!” But how would I go about building another one?

Fortunately enough, as outlined in my original Witch Lord post, I had come up with a plan for a plastic Witch Lord conversion as my original approach before later using an old Citadel metal model for the actual conversion. But I still felt that this recipe could work really well for the task I was facing now. The approach would look similar in nature to this renegade psyker I built a few years ago:

The basic combination of bitz at the heart of this approach – combining the legs of an Empire flagellant with a Skaven Stormvermin torso – makes for a slightly stooped and subtly sinister body that works for all kinds of villainous sorcerer types, Witch Lords included. But even though the basic idea was sound, it still took me a rather long while before I finally came up with a basic setup that worked:

Taking Les Edward’s illustration as my main point of reference once again, I tried to go for a model that would hit enough of the artwork’s visual cues to read as the Witch Lord, even if it didn’t reproduce every element from the artwork. I still tried to make it a rather close fit, though, and bitz from about ten different kits went into making the model look right, including a Skeleton warrior head, a ghoul hand, some Empire Knight feet and a Bloodletter mandible. By lucky chance, I tried the horns I got as a leftover piece from when I shaved horns off the new vanilla CSM helmets to replace them with Khornate helmet crests a while back , and they really made the helmet work so much better.

Here’s the model just a bit later, glued together and with the necessary tweaks in place:





Up to this point, however, I still wasn’t entirely sure whether or not I was on to something. That changed after undercoating, though, when all the disparate parts really turned into something that looked reasonably closely like a HeroQuest model:

When painting my new Witch Lord conversion, I tried to basically recreate my earlier paintjob, with just a few minor tweaks here and there, and went for the classic triad of basecoats,…

…washes,…

…and higlights.

I spent quite a bit of time on that last part, obviously, to make sure the model would really work as a centre piece character.

So here’s my finished plastic Witch Lord:

I was really very happy with the outcome, as this felt like a worthy contribution to the Christmas exchange. And I do think the model holds up when placed next to my original Witch Lord model. Take a look:

I would be hard-pressed to decide which of these I like better. True, my original model is quite a bit flashier, on account of using a different base model, but the new version is actually much closer to the kind of model you would actually find in a HeroQuest set from back in the day (it is also, it has to be said, much easier to recreate for someone who wants to build their own Witch Lord, which is useful).

At the same time, I did my best to create a subtle connection between both models: They both use an identical palette and the weird avian skull on their respective staffs is also just the same. And they both – hopefully – match the piece of artwork that inspired them to begin with:

The new Witch Lord also looks pretty convincing next to some actual HeroQuest models, if you ask me:

So that was my model for Weltenlaeufer’s HeroQuest conversion done and dusted, right? Not quite, because I wasn’t finished yet:

I also wanted to make sure the packaging matched the style of the model, and seeing how the Witch Lord emerges his tomb, as represented by the little sarcophagus that comes in the HeroQuest set,…

I thought it would be really cool to incorporate this element in my package as well, so I used “Keramin”, a plaster like material that dries really fast and hard, in order to make a quick copy of the lid:

Talk about happy accidents: The casting process was actually not quite perfect, leading to some bubbles that marred the face of the reclining figure. But they actually ended up making the face look even more gaunt and undead, which was of course ideal in this case:

So I painted the copied lid up in suitably stony colours…

…and used it to add that certain je-ne-sais-quoi to Weltenlaeufer’s package, so upon opening it, he would find this:

A recreation of the Witch Lord’s tomb, to be opened by an intrepid (or foolish) adventurer to unleash an ancient horror upon the Old World…

Mission accomplished, at long last! So I packed it all up and sent it off to Poland towards the end of November, then spent a frantic week or so wondering whether the postal service would somehow manage to mess this up. They didn’t, however, so not only did my little Witch Lord arrive in time, but Weltenlaeufer also ended up really liking the model, by the looks of it:

Yay! 🙂

Even better, actually: As if on cue, Weltenlaeufer had recently picked up a brand new set of brilliant tabletop catacombs from Dwarven Forge.

Here’s my, pardon his plastic Witch Lord surveying his new domain:

By the way, you can check out more of Weltenlaeufer’s very cool ongoing HeroQuest related work on his thread here.

So all’s well that ends well, right? Hah, we’re still not at the end! Because not only did I send off a model, I also received one in return: Last week, I received a package from fellow forumite Anderas, and out came this gnarly little gentleman here:

A wonderfully painted Orc — far neater than anything I have ever painted myself! This goes to show how my aversion to “standard models” was entirely misguided. The delightful little git has also managed to get his hands on a chaos warrior sword, it seems, and seems to be handling it very delicately, given that one protective glove 😉

What’s probably the nicest bit here, however, is that the model also features some rather lovely painted on cobblestones:

Anyway, thanks a lot Anderas, and indeed all the fellow forumites from Ye Olde Inn, who have made this little event such a heartwarming affair! I urge you to check out the rest of the contributions — some very creative riffs on HeroQuest models can be found in the event thread.

And, of course, thank you to my readers and commenters! I wish you all a very Merry Christmas and hope you’ll be having a great holiday season!

I’ll be back later this month – if all goes well – with this year’s installment of the Eternal Hunt Awards, whatever that may look like. Until then, I would, of course, love to hear any thoughts you might have! And, as always, thanks for looking and stay tuned for more!

#HeroQuest2019: The Witch Lord

More #HeroQuest2019 today, but after blazing through the entire set of undead monsters, I felt I had earned myself a little wiggle room for a bit of fun. So what is this about?

As you have already seen in a previous post of mine, I won’t simply limit myself to painting the classic models, but I am also looking at some chances here and there to add some custom models to my set of HeroQuest, in order to create representations for the special characters that appear in some of the quests, but don’t have an official model. So this time around, my plan was to create a model to represent that most dastardly of recurring HeroQuest villains: The dreadful WITCH LORD!

For those who don’t remember the game, seeing how it’s been thirty years and everything, the Witch Lord made his first appearance in the standard quest book: Intrepid adventurers would accidentally awaken him about two-thirds through the base game’s collection of quests, while actually searching for a magical artifact, then had to find a magic sword that could harm him in response to his awakening. The Witch Lord then served as the quest book’s end boss, so to speak. Yet that was not the end of it:

A couple of expansions for HeroQuest were released a bit after the basic game system, and one of these was titled “Return of the Witch Lord”. Here’s Les Edward’s cover artwork for that particular expansion:

Illustration by Les Edwards

When I saw it, I was instantly in love! In fact, the cover artwork alone sold me on the expansion, so when I was allowed to choose a HeroQuest expansion box as a birthday gift, I chose this. How could I not, with all those wonderfully skeletal knights on the cover, and let’s not forget Skeletor’s debonair cousin at the centre of attention!

In hindsight, especially from a collector’s perspective, it would have been so much smarter to get, say, the “Against the Ogre Horde” expansion that actually came with some original sculpts, whereas Return of the Witch Lord just featured more skeletons, mummies and Zombies. But I couldn’t help myself, that illustration just went straight for the throat — in fact, it remains one of my favourite fantasy illustrations of all time, and I feel tempted to say that I even prefer it to the actual HeroQuest cover artwork.

There was also something truly cool about having a recurring villain across several iterations, especially one so blatantly inspired by Skeletor. Fun fact, though, I didn’t even realise the villain of the piece was supposed to be the Witch Lord as the German title of the expansion was “Die Rückkehr des Hexers”, and the only character referred to as a “Hexer” (Warlock) in the German version of HeroQuest was a character from an earlier quest, represented by this model from the box, yet another skull-faced evildoer:

Don’t worry, we’ll be getting to this guy in a furture post…

Anyway, be that as it may, I think you can maybe understand why remembering the Witch Lord gives me a warm and fuzzy feeling. So when I sat down recently to think about whether or not I could add a couple of custom conversions to my classic HeroQuest set, it was obvious the Witch Lord would end up right at the front of the queue.

I started by collecting inspiration online and looking at other people’s work, as I usually do before a conversion project. Once again, Lestodante’s collection provided ample inspiration:

Models from Lestodante’s collection

As you can see, the model he uses for the Witch Lord is, in fact, a custom sculpt that almost perfectly replicates the artwork while also looking very much like an official HeroQuest model from back in the day — a wonderful solution, and I am still green with envy!

There was also Ampersand’s really cool Witch Lord:

Witch Lord conversion by Ampersand

As you can probably guess from looking at the model, this one uses more modern GW plastic parts, namely from the (still available) Skeleton Warriors. So I made a note and earmarked that particular kit as a possible source of useful bitz.

As an aside, there’s also the Frostgrave Lich Lord, who would have would have worked really well, too, even though I only discovered this after the fact:

In fact, given the resemblance in both the design and the very name, you’ve got to wonder…

But anyway, a proud converter like me has to come up with his own version, right? So keeping the excellent inspiration in mind, I decided that the best way to start was to work from the very artwork that had inspired me so much many years ago. So here’s a closer look at the Witch Lord as originally imagined by Les Edwards:

My initial idea included some Skaven Stormvermin and Empire flagellant parts and would have looked a bit like this 40k renegade psyker I built a couple of years ago:

And I think the general approach would have worked pretty well, too. But then fate struck, and I discovered an even better approach:

You see, one of the things I wanted to achieve with my Witch Lord model was to have the model invoke that particular, slightly clunky “retro GW” Oldhammer look: I wanted a model that looked like it could actually have been produced back when HeroQuest was originally released.

So what better way than to start with a vintage model from back in the day?

So here’s what my very first Witch Lord mockup looked like:

The model is actually mostly based on an old, early-to-mid 90s Dark Elf Warlock. This guy:

And I still had the remains of one of those in my bitzbox. It was already in a pretty sorry state, too, missing both its its head, right hand and staff by the time I got it, so it’s not like I actually had to vandalise a classic model to make my Witch Lord — if anything, this was yet another salvage job!

The head came from the – aforementioned – GW Skeleton Warriors, with horns from the plastic WFB Chaos Marauders. And I began building the Witch Lord’s staff by combining an old Skeleton standard bearer arm (for the staff) and a bird skull from the GW Skulls kit.

After I had the basic outline, it was mostly a matter of matching as many visual cues from the artwork as possible. So here’s the finished conversion:

I replaced the first version of the left hand with a Empire flagellant hand. The detailing on the staff was achieved by grafting some Bloodletter horns and teeth to the bird skull for a pretty convincing look, if I do say so myself (Fun Fact: I have since discovered that the staff wielded by the leader of the Nightvault Godsworn Hunt warband would have been an almost ideal place to start — oh well…).

And since everything was still looking rather hideous at this point, it was a good thing that the undercoat had the great effect of pulling all of the disparate parts together rather nicely.Take a look:

Even though I had to make a couple of compromises, I think I have still done a pretty good job at matching both Les Edward’s art and the somewhat clunky vintage HeroQuest look, wouldn’t you agree?

When it came to painting the model, the artwork worked as perfect inspiration, so I tried to match it as closely as possible, especially for the luxurious crimson robes, dark metal and bright golden parts. Here’s a PIP shot…

…and here’s the mostly finished model:

Of course the Witch Lord needed to be on a proper HeroQuest base, so I carefully cut a damaged skeleton from its original base and used that for my Witch Lord model. One weird but cool thing was that the undercoat produced a really pronounced crackle effect when sprayed onto the base, and for no discernible reason, at that. At first I was a little miffed, but then I realised that this was a cool little effect, seeing how this is the base of a powerful undead monstrosity, so I actually embraced it:

And I still wasn’t done with the model itself either, as I wasn’t perfectly happy with those empty eye sockets, and rather wanted to feature those evil, glowing eyes from the artwork. So I went back to the model and created the tiniest eyeballs you can probably imagine, from almost microscopic amounts of GS. So here’s how that turned out:

And with that, the model was officially complete. So without any further ado, I give you: The Witch Lord:

All in all, this was a great way of expanding the classic collection of models, give myself a fun distraction between painting all of those monopose monsters, but trying to match the retro-GW look was also a neat little challenge.

So here’s a look at the Witch Lord commanding his army of the undead:

So that’s it for today. I am pretty happy with my little undead horde, but I still have a lot of work before I can call my set of HeroQuest completed, so it’s back to the painting table for me 😉

It goes without saying that I would love to hear your thoughts on my version of the Witch Lord, so drop me a comment! And, as always, thanks for looking and stay tuned for more! 🙂