Archive for praetor

Khârn of the Eighth

Posted in 30k, Conversions, paintjob, World Eaters with tags , , , , , , , , , , , on May 1, 2017 by krautscientist

“The first warrior’s ceramite armour plating was cast in the same white as clean marble, from churches that should never have been built. The suit’s reinforced edges were the same blue as a winter sky back in the impious age of Old Terra, before humanity burned the world’s surface and drank the natural oceans dry. His skin was as pale as any consumptive, a legacy of the pain machine inside his skull. It pulsed even now, teasingly erratic, sending fire tick-tocking through the meat of his mind.

The helm he carried under his arm was a slant-eyed, snarling thing of red eye lenses and a Sarum-pattern mouth grille. An officer’s crest of white horsehair rose, sharkfin-like, to mark him out from his men in the heat of battle. The etching on his shoulder guard, written in the mongrel tongue called Nagrakali, named him as Khârn of the Eighth.”

Aaron Dembski-Bowden, Betrayer

Welcome to another World Eaters-related update — I almost feel like I should apologise for the somewhat monothematic nature of recent posts, but then I am simply on a bit of a roll with this latest project of mine, and I know better than to second-guess inspiration when it strikes… 😉

So you probably remember my conversion of Khârn here, created fairly recently:


Now earlier this week, fellow hobbyist Aasfresser talked me into joining a small painting event at one large German hobby forum and suggested I enter my interpretation of 30k Khârn. I let myself get roped into it — which was all for the best, ultimately, but we’ll be getting there in a minute.

Before I could start painting the model, however, there was one last additional touch I wanted to include: Seeing how Forgeworld’s official model comes with options for both a helmeted and bare head, I just wanted to include the same variants on my own conversion as well. Now the bare head was already taken care of, which left me with having to come up with a suitable helmet.

ADB’s description of Khârn’s helmet (as quoted above) calls it “a slant-eyed, snarling thing of red eye lenses and a Sarum-pattern mouth grille.” And the accompanying piece of BL artwork came up with a version that is fairly close to the model’s actual design:


I knew I wanted something very slightly different, however, because I couldn’t shake the feeling that the one helmet design perfectly matching the description above…were the helmets that come with Forgeworld’s 40k World Eaters conversion set.

And it makes a lot of sense, too — wouldn’t those 40k World Eaters still be wearing the corrupted versions of their original Sarum-pattern helmets? Plus there was also the fact that I had seen Mr. Poom put the same approach to excellent use on his own, spectacular World Eaters.

So I very carefully shaved the Khornate crest off a World Eaters helmet and used it as a template for my first Sarum-pattern helmet:



And I was reasonably happy with the result — I would definitely be able to create a suitable helmet for Khârn this way, of course with an added officer’s crest!

The other thing to take care of was the model’s base. Now I quickly realised that a character of Khârn’s stature warranted a bigger base, so I upgraded him to a Terminator-sized base right away. When it came to the base’s actual design, I wanted it to contain visual shout outs to Angron’s base, creating an even closer link between the two models, which only seemed fitting. So I tried to repeat several elements that appear on Forgeworld’s base for Angron: torn metal beams, diamon patterned metal plates and rocks, stuff like that. At the same time, I also tried to make it fit the design of my other World Eaters, using the same general texture:


With those preparations out of the way, the time for painting had come. And in spite of the tight deadline – or maybe because of it – the model almost came together by itself, surprisingly enough. Seriously, I had a blast with this guy!

So here’s everyone’s favourite, bloodthirsty madman in his younger years:

Khârn

“The Bloody”, Eighth Captain,
Equerry to the Primarch Angron,
XII Legion Astartes

 





It was absolutely clear, of course, that I would have to include some kind of blood effect, but I also didn’t want to overdo it — which is why I chose to focus the blood on the left leg, where it would probably end up when gore keeps flying from the teeth of Khârn’s axe.

I also have to admit that I actually really love the helmeted version — which is a strange development, seeing how the bare head was what inspired the whole conversion in the first place, but then that’s creativity for you… In all fairness, however, it also feels quite appropriate to have a helmeted version when the original, classic 40k Khârn is defined so much by his helmet.

Regarding the model’s base, like I said, it now serves as a “missing link” between Angron’s base and the bases of my remaining World Eaters:


In an interesting twist, fellow hobbyist Soric pointed out over at The Bolter & Chainsword that there’s a matching piece of broken aquila in the same basing set that would just be idea to base an Argel Tal conversion — a rather interesting and tempting thought, really… 😉

Oh, and here’s a closer look at the bareheaded version of the character:


It’s mentioned several times in Betrayer how the pain of the Butcher’s Nails is a constant companion to Khârn, yet in contrast to many of his brothers, he actually tries to fight their influence and stay levelheaded more often than not, so I thought it would be nice to give his face a drawn, haunted quality. And I do think both head options really have merit, which is why I’ll leave the head interchangeable.

And, of course, Father and Son:


Wha…? Are they wielding the exact same axe at the same time? TIME PARADOX! 😉

What I really like is how the model really kinda looks like an “end boss” next to one of my regular World Eaters. Even the – rather vertically posed – Secutor Hamund is a bit shorter than Khârn:


When all is said and done, my objective was to create a model that draws enough visual cues from different sources to really read as Khârn. And when it comes to the 40k versions of the character, I think my model could reasonably grow into the classic Khârn over the next 10,000 years — but also into the new (plastic) version:


And I would argue he even takes enough cues from Forgeworld’s version of Khârn to clearly read as the character from that angle as well — and not just as any old World Eaters Centurion.

So I am really rather happy with the finished model — thanks must go to Aasfresser for actually convincing me to get off my arse! Oh, and this should go without saying, but I would definitely love to hear your feedback on the model, so make sure to drop me a comment!

As always, thanks for looking and stay tuned for more!

Advertisements

Secutor Hamund of the World Eaters

Posted in 30k, Conversions, Fluff, paintjob, World Eaters with tags , , , , , , , , , , , , , , on March 29, 2017 by krautscientist

I’ll be spending the second half of the week at two conferences, so you beautiful readers will have to cotent yourselves with something (relatively) short and sweet this week. Never fear, however, as I do have a new finished model to share with you.

A couple of years ago, I would routinely sit down and create a new World Eaters conversion several times a week. It was just a neat way of widening my conversion horizons, and the World Eaters look and feel really clicked with me — and still does, at that.

However, I’ve ended up with a rather huge pile of converted models that way over the years, and while some have been painted in the interim, and some have been tweaked on and off for years at this point, there were also some candidates that just ended up lurking about on my desktop and in my cupboard of shame. Like this guy here:


Originally built as a Chosen champion of some kind, he was cool enough, but in the end he just didn’t come together as a character, so into the great plastic men Limbo he went 😉

Until I happened upon him during my first, hesitant Horus Heresy experiments, when he finally seemed like a pretty cool addition to my embryonic 30k World Eaters project. There were just so many things that made him eligible for a place in my fledgling 30k collection: His armour wasn’t too ornate, but rather had a workmanlike and cobbled-together look that really suits a 30k World Eater. He also had that larger than life look that is ideal for a 30k commander. So I made some further tweaks to the model and turned him into this:



As for the actual conversion, most of the model consists of a plain old vanilla Chaos Space Marine. I cut the legs apart and reposed them in order to make the pose more interesting and add some height to the model. Both arms came from a Finecast Champion of Khorne, still available from GW, albeit called an “Exalted Deathbringer” these days.

Several people gave me grief over the way the model is holding its shield, correctly pointing out that shields, or at least tower shields, normally don’t work that way. To that I say: Fair enough. I could make things easy for myself here and point out that the blame actually lies with GW’s sculptors. But to be perfectly honest, I rather like the shield arm, and I decided I would use the paintjob to show how this guy uses his shield more as a weapon than as an item of defense.

The part that really finished the model was a head from the Space Wolves Terminators, purchased on a whim when I was hunting around for interesting Astartes faces. I think it really turns the model into a character, and it’s also slightly less monstrous than something you would expect in a Khornate 40k army — it just works far better for a Heresy era offcier, if you ask me.

So yeah, he found a new – and, arguably, far more fitting, home with my 30k World Eaters. But that still didn’t mean he saw any paint. I did really want to see him finished, though, so I just took the opportunity and wedged him into my already existing vow for the “Loyalty and Treachery III” event over at The Bolter & Chainsword. And that certainly did the trick. Take a look:

 

Secutor Hamund

“The Mournful”, IVth assault company Delegatus, XII Legio Astartes


“You ask if this is what I wanted for myself, remembrancer? If this is what I dreamed of?
Who could ever dream of a life such as the one we lead and crave to do as we do?
No, I did not wish for this life. But it was this or the fleshmarket at Kalekka, and a choice like that is no choice at all.”

Secutor Hamund

So let’s take a closer look at Hamund, shall we?








So, a couple of notes on the model: I mainly stuck to my established World Eaters painting recipe. The most interesting area was the shield, because I wanted to make it look really grisly — and I also wanted to hint at the fact that Hamund probably uses it to give opponents a good beating or even slice open a jugular vein here and there, if push comes to shove. So making it look suitably battered and gruesome was a fun challenge alright!

However, to be perfectly honest with you, painting Hamund turned out to be a rather massive slog, all in all, both because the conversion was pretty messy, using some very beat-up parts, and because the arms came an fairly early Finecast model (i.e. lots of bubbles and warping). With those factors in mind, I am pretty happy with the finished model: His patched-together suit of mongrel-plate really gives him a suitably World Eater-ly look, and the smaller Khornate symbols scattered over the model could be seen as the War God’s influence slowly beginning to manifest during the latter stages of the Heresy.

As for his background, Hamund is one of Captain Lorimar’s “Secutorii”, an officer serving as  a go-between between the Praetor and the officers at squad level. There are two more Secutorii in the 4th assault company (as of yet), Eigar and Khoron. Here are the three of them, when Hamund was still unpainted:


These guys are basically what company captains would be to a 40k Space Marine Chapter, I suppose, with Lorimar more like a modern-day Chapter Master, due to the sheer size of the Heresy era Legiones Astartes. Anyway, finishing the entire triumvirate at some point will be fun. And longtime readers of this blog should already know Khoron. Just sayin’…

For now, however, I am pretty happy with finally having finished Hamund! So here’s another round of family photos, to celebrate the occasion 😉

Hamund with some of the Legionaries under his command:


And, once more, my slowly growing 30k World Eaters collection — slow and steady wins the race, eh? 😉


So yeah, feel free to let me hear any feedback you might have! And, as always, thanks for looking and stay tuned for more!

Studies in Mk. III — my first experiments with the models from “The Burning of Prospero”

Posted in Chaos, Conversions, WIP, World Eaters with tags , , , , , , , , , , , , , , , on November 23, 2016 by krautscientist

Before we begin, let me give you fair warning — there are lots of unpainted plastic ahead!
But with the contents of The Burning of Prospero box now at my disposal, I liked the idea of sharing my initial experiments on the new kits with you — and it somehow turned into a sprawling kitbashing post somewhere along the way. What’s more, it occurs to me that I haven’t actually shown you some of my recent 30k World Eaters conversions yet, so let’s start with those (don’t worry, we’ll be getting to the new Mk. III models before long 😉 ).

First up is a conversion I am actually really happy with, and it began as another attempt of building a Heresy era version of one of my 40k Chaos Lords. This time, it was Huntmaster Bardolf’s turn:

Huntmaster Bardolf new
He was one of the first more involved conversions I did after getting back into the hobby a couple of years back, and while the conversion does show its age a bit, I am still enormously fond of this guy, mostly because he was my go-to Chaos Lord in all those smallish 500 and 750 points games when I re-learned 40k. As a consequence, his various victories and losses really turned him into a character rather than a mere playing piece, and helped me to figure out what I wanted Khorne’s Eternal Hunt to feel like. So I thought it would be fun to build a younger, uncorrupted version of Bardolf, from his time as a fresh-faced veteran sergeant during the Heresy.

The idea here was to take several elements from the 40k model (the pose, the weapons, and a couple of bitz) and incorporate them into the 30k version as well, while still making him seem like a more restrained 30k character (and also a sergeant and not yet a powerful commander type). So here’s what I came up with:

Sergeant Bardolf WIP (1)

Sergeant Bardolf WIP (2)
And since even the World Eaters still occasionally used slightly more conservative Astartes warfare tactics back then, I also made sure to add a standard bolter in addition to the axes

Sergeant Bardolf WIP (3)
There’s also a peculiar pleasure in adding enough gear to the individual Astartes to make them look believable — something that doesn’t seem to be as much of a concern in 40k (at least not for Khorne Berzerkers), but lends itself really well to the more regimented feel of the Heresy era legions.

Anyway, I am pretty happy with the finished model, and here’s a comparison shot showing Bardolf now and then:

Bardolf then and now WIP

I think this pair really gives a rather nice idea of what ten millennia of service to the Ruinous Powers will do to you 😉 At the same time, it’s recongnisably the same guy, wouldn’t you agree?

While I really like the conversion, however, it also left me with the upper half of the BaC Kurtha Sedd model — and to be honest, the stock model didn’t do much for me. I did want to build a chaplain for my 30k World Eaters, however, mostly because I remembered  Poom’s amazing chaplain model and wanted to steal some cues from it.  My first attempt involved using the Kurtha Sedd torso swapping in a pair of plastic Mk. IV legs and using the same helmet (from the limited edition Interrogator Chaplain from Dark Vengeance) and Rampager weapon (as an alternate crozius) as Poom. So here’s my first take on the chaplain:

30k World Eaters Chaplain WIP (3)
I also tried to add a few touches of my own here and there. For instance, I really liked Fabricator General’s take on the World Eaters’ chaplains serving as “Chain Dogs”, the grim overseers of the fighting pits, and I tried to make my chaplain reflect that concept.

So I was already really happy with my Chaplain conversion, but I still had to make two small tweaks: Something about his very clean left wrist and forearm kept bothering me, so I ever-so-carefully cut off the hand, shaved off a slice of the forearm and spliced in one of the shackles from the AoS Bloodreavers that I have been using as decoration on many of my 30k World Eaters.

I also exchanged the legs for a pair of legs from the new plastic Mk. III Marines, and while I liked the previous setup well enough, I’d argue the new legs give him even more of a grim presence.

Meet Chaplain Karrim Krieger, Chain Dog of the 4th assault company, overseeing the fighting pits and ensuring the bonds of brotherhood between the brethren of the legion remain strong:

30k-world-eaters-chaplain-karrim-krieger-wip-5
30k-world-eaters-chaplain-karrim-krieger-wip-4
30k-world-eaters-chaplain-karrim-krieger-wip-3
So this is where we finally get to the actual Mk. III related shenanigans: I had already used one pair of legs so far, but I wanted to build my first proper Mk. III Marine. Iron armour has always been one of my favourite armour marks, if not the favourite, both for its bulk and medieval look and for how decidedly different it looks from standard 40k power armour.

So I started messing around with the new bitz and thought they might be appropiate for building a guy wielding a big gun:

30k-world-eaters-heavy-early-wip-2
30k-world-eaters-heavy-early-wip-1
At this point, the model was still almost completely stock Mk. III. My one tweak was to add an Ork shoota’s barrel to the heavy bolter, making the weapon look far more brutal and massive.

The next step was to try and give the Marine that certain World Eater-ly je ne sais quoi. Now the temptation is rather big with these models to just go completely chaotic on them, adding spikes and trophies to every surface, but I am trying to deliberately keep them away from full-on 40k baroqueness, in order to show that the worship of chaos is only just beginning to creep in here and there, but the 30k World Eaters are still pretty different from their 40k incarnation at this point. With that in mind, I just made some small tweaks to the model:

30k-world-eaters-autogunner-wip-1
30k-world-eaters-autogunner-wip-2
I think the Anvilus backpack has a nice way of making the model look even more archaic, plus it also provides an element of improvisation to the armour, which I think is a great fit for World Eaters: Given their style of warfare, I think the legion should really be full of mix’n’match armour that has been patched together from everything that could be scavenged off the battlefield.

The next model I built further explored this angle, mainly staying with Mk. III parts, but swapping in a CSM torso piece:

30k-world-eaters-in-mk-iii-armour-wip-1
30k-world-eaters-in-mk-iii-armour-wip-2
The one serious shortcoming of the new models is that, once again, we have to make do without dedicated CC weapon arms (the few that come with the squad’s sergeant notwithstanding), so I texperimented with getting around that limitation. My impression is that the Mk. III Marines are both harder and easier to turn into models armed with CC weapons than their Mk. IV brethren. Harder because it’s not as easy to just swap in alternate plastic arms — due to the bulk of the armour, you’ll lose the iconic Mk. III look. On the other hand, the segmented armour plates make it quite a bit easier to carefully cut the arms apart and repose them (like I did with a pair of bolter arms on the guy above).

And finally, I went a little more adventurous and built this guy:

30k-world-eaters-in-mk-iii-armour-wip-4
30k-world-eaters-in-mk-iii-armour-wip-5
As you can see, he is wearing far more hybridised armour than his predecessors, which once again ties back to the kind of mongrel armour I’d imagine most of the World Eaters to be wearing partway through the heresy. Now I realise that many World Eaters players feel that those old berzerker arms are the bane of our existence, but the clunky look just really suits the whole Heresy-era World Eaters look and feel for me. It’s not an effect I’ll be using on every other model, but I do think this guy really reads as a World Eater.

All in all, I am pretty happy with my Mk. III experiments so far, yet I also think that there is still much fun to be had with the new parts!

30k-world-eaters-in-mk-iii-armour-wip-3
As a nice added bonus, these new models round out what will be my first tactical veteran squad, squad Bardolf. Here’s a look at the squad so far:

tactical-veteran-squad-bardolf-wip-3
tactical-veteran-squad-bardolf-wip-4
So that means one model left to go for the squad, and the vexillarius, no less — I am still debating with myself over whether to go with the fairly low key, backpack-mounted vexilla that comes with the kit or go for a slightly more involved banner. The latter seems like a better fit for the World Eaters, but I am also planning a dedicated company standard bearer for the future, and I don’t want the squad vexillarii to overshadow that guy. Then again, I grew up with 2nd edition 40k where the guy with the banner mounted on his backpack was always the sergeant. Argh, choices… 😉

 

 

And as a lucky coincidence, I also managed to finish yet another model that had been in construction for quite a while: The leftover Mk. III backpack from the heavy weapons guy was used on this World Eaters Praetor:

30k-world-eaters-secutor-wip-2
The model is based on an Ivanus Enkomi body Augustus b’Raass sent me a while ago. I realise I must have shown the model to you before, but now I am finally happy with the setup: The new backpack provides precisely the dash of Heresy-era tech the model was still missing.

30k-world-eaters-secutor-wip-1
This guy will be one of Lorimar’s Secutorii, a cadre of officers serving as a link between the Captain and the individual squad leaders:

world-eaters-4th-assault-company-secutorii-wip

To make a long story short, I imagine those 30k World Eaters will be one of my big hobby projects in 2017. However, I still refuse to refer to the project as an actual army — yet…

And finally, before I wind up this post, something that doesn’t have anything to do with my World Eaters but very much factors into my experiments with the new Prospero plastics: Some of you may remember that I kitbashed a whole squad of those girls, back when there were no models available. And I wanted to experiment a bit with the new, “official” models vis-à-vis my own attempts from a couple of years ago. Here’s an initial comparison picture:

sisters-of-silence-wip-4
The model on the left is the squadleader from my kitbashed Sisters of Silence. I am still pretty happy with the model, to be honest, even in the face of the new kit. On the right is one of the new, official models — and I think they share enough visual cues to keep the older model viable.

Even so, I wanted to experiment with this a bit more, so in an attempt to blur the edges between the two approaches, I used some leftover bits from the new Sisters (a head and a shoulder pad, to be precise) on another one of my kitbashed models to create something like a “missing link”:

sisters-of-silence-wip-2
sisters-of-silence-wip-1
sisters-of-silence-wip-3
I rather like the result and think this avenue of kitbashing definitely warrants some further experimentation — here’s a comparison picture showing all three models so far:

sisters-of-silence-wip-5
So yeah, the TL;DR version of this would be: It’s quite a lot of fun to mess around with those kits from The Burning of Prospero right now, even if I am taking it slow for now. Feel free to let me hear any feedback you might have!

And, as always, thanks for looking and stay tuned for more!

Inquisitor 28: From Cataphractii to Chapter Master

Posted in 40k, Conversions, Inq28, Inquisitor, WIP with tags , , , , , , , , , , , , , , , , , , on May 12, 2016 by krautscientist

Hey everyone, after speaking – at length – about my conversions using the Cataphractii Terminators from Betrayal at Calth and about my experiences converting that Cataphractii Praetor from the same boxed set into yet another 30k version of Lord Captain Lorimar, let’s return to the wonderful world of Cataphractii once more and discuss another conversion. The base for today’s project was, once again, the Betrayal at Calth Cataphractii Praetor:

Betrayal at Calth release (17)
Messing around with the model had already taught me that it didn’t take much to really transform the stock version of the Praetor into something else — but I wasn’t quite finished with the model yet, because I had to remember Commissar Molotov’s very interesting proof of concept for a true scale Astartes based on the Cataphractii Praetor. And after learning for myself how relatively easy it was to get rid of the model’s pidgeon-toed stance, I couldn’t get this idea out of my head. And when I recently had the chance of picking up another Praetor for cheap from fellow hobbyist Mineralwasser, that basically settled the deal. And what better way to convert this model again than to make it into the Chapter Master of my DIY Chapter, the Golden Legion?

I started by creating a very simple first mockup:

Second Golden Legionnaire early WIP (1)
The main objective here was to get a basic feel for what I wanted the model to look like. As you can see, I made the exact same adjustment to the legs I used on my Lorimar conversion earlier. Beyond that, a couple of things were pretty easy to decide, even at this early point: I really, really wanted to use that fantastic, bearded head from the Sternguard kit (possibly one of the best Space Marine heads ever), and some ostentatious shoulder pads from the same kit would be used for the Chapter Master’s pauldrons.

Regarding the overall look of the armour, I think the Cataphractii Praetor is a really promising base model for a true scale conversion, as the armour could easily pass for an older mark of regular power armour or some kind of artifcer armour. Possibly the best part is that the layered armour on the arms and legs believably looks like enforced standard power armour — unlike plastic 40k Terminator parts that will always look like Terminator armour, unless you are prepared to invest quite a bit of work.

Anyway, here’s a comparison picture with the early mockup version and my previous Golden Legion Astartes, Praetor Janus Auriga:

Second Golden Legionnaire early WIP (2)

The next step was to nail down the pose I wanted as well as the overall feel of the model, in order to decide on the additional bits I would need . For instance, the Praetor’s stock arm with the combi-bolter worked reasonably well, but it wasn’t what I had in mind for the Golden Legion. In my background notes, swordplay is a huge part of the Legion’s culture and mythology, so it goes without saying that the Chapter Master would need an especially ostentatious sword. However, as the following picture shows, using the stock arm and weapon would work really well for an Astartes with a slightly more standard set of equipment!

Second Golden Legionnaire early WIP (3)
For the left forearm, I decided to use an arm from the Stormcast Eternals models from the Age of Sigmar starter box: I already knew at this point that I wouldn’t be keeping the hammer, but the vambrace has a very nice lion design on one side, plus it really worked well scale-wise for a true scale Astartes.

But yeah, I wanted a sword, so I browsed through GW’s entire catalogue until I came upon a bit that I thought might do the trick — I even made a crude Photoshop mockup of the whole shebang at this point 😉

Second Golden Legionnaire early WIP (5)
So I ordered that sword from the Deathwing command squad, along with a small collection of additional bitz — we’ll get to the result in a second. Before that, however, here’s a look at the model’s back, warts and all, to show you the construction I used:

Second Golden Legionnaire WIP (5)
The model’s back is basically a shaved down GK Terminator torso back, which fit surprisingly well with a bit of shaving here and there. What’s more, the shaved-down back vents really make for an excellent point of attachment for a standard Space Marine backpack without any further work — I used the same approach on my first true scale Marine, incidentally.

One thing you will also have noticed in the picture above is that I did try to add a stylised deathmask to the model’s right pauldron. The idea was that this is the Deathmask of St. Sabasto, the Velsen Sector’s patron saint, so to speak, and that the Golden Legion is using it almost like a chapter badge. I felt mighty smart when I press-molded a Sanguinary Guard mask with GS, because I thought a GS duplicate would ultimately conform to the shoulder pad’s curvature far better — but unfortunately it ended up looking pretty hokey! I did find a very simple solution for this problem, though.

So here’s a look at a far more complete version of the Chapter Master:

Golden Legion Chapter Master WIP (1)
As you can see, the Deathwing sword works really well with the stock arm, even though it turned out to be even longer than I had anticipated. I also added a cape from the same Deathwing kit, because, let’s face it, Chapter Masters just need to look suitably ostentatious 😉

As for the mask on the shoulder pad, the solution turned out to be almost disappointingly simple: I simply grafted an original plastic Sanguinary Guard faceplate to the shoulder pad, and it worked much better than the GS copy I had on there earlier (even though it made me feel a bit stupid for even trying the long way around, so to speak):

Golden Legion Chapter Master WIP (3)
Golden Legion Chapter Master WIP (2)
As I have mentioned earlier, the idea behind the deathmask is that it’s the stylised face of the Imperial Martyr Sabasto, patron saint of the Velsen Sector. The Golden Legion were his personal guard of honour when he defended  the sector against an incursion by the forces of the Arch-Enemy about 1,500 years ago, and his ultimate demise at the very forefront of the Crusade remains a mark of shame to the chapter, and a reason for their fanatical need to protect the Velsen Sector against any enemies from without.

At this point, most of the conversion was basically finished:

Golden Legion Chapter Master WIP (4)
All that was left to figure out was what to do with the left hand: I considered – and ultimately discared – many different weapon and equipment options, because they all ended up feeling a bit too pedestrian to me. But then again, leaving the hand completely empty also seemed like a bit of a missed opportunity.

Fortunately, JaggedToothGrin came up with the excellent idea of having the model hold some kind of rosary or amulet, and EdT suggested using the left hand of this Age of Sigmar Paladin Retributor:

Paladin Retributor Champion

I instantly liked this idea, but I didn’t know how easy it would be to source the required bit — but it soon became obvious that I wouldn’t even have to find that particular hand, because I discovered yet another suitable part on the Sternguard sprue.

So here’s Orestes Prabian, Lord Commander of the Golden Legion, finished except for maybe a bit or two 😉

Golden Legion Chapter Master WIP (10)
The small chain with a Crux Terminatus dangling from it was originally part of a Sternguard torso, but it seemed like a natural fit, so I carefully snipped it off and grafted it to an empty fist from the same source, and I am really happy with the result:

 

Golden Legion Chapter Master WIP (12)

Golden Legion Chapter Master WIP (14)

The area where the backpack meets the cape will require some minor cleanup, but that shouldn’t be too much of a problem. After that, it’ll mostly be a case of carefully adding a bit more bling to the model here and there 😉

Golden Legion Chapter Master WIP (13)

I think the finished conversion is suitably iconic to work as a Chapter Master — and, maybe even more importantly, it also believably works as a true scale Astartes! Here’s another comparison picture with Janus Auriga:

Prabian & Auriga comparison picture
Granted, upon closer examination, Janus may be ever so slightly taller than his Chapter Master — a result of my cobbling together a recipe while I was going on the first model, whereas the second Astartes was mostly based on a rock solid base model. In the end, I didn’t want to mess up the Chapter Master’s proportions by awkwardly splicing in any spacers, though — and who knows, maybe Janus is just a big guy, even for an Astartes?

Here’s another picture, showing both the Chapter Master and my 30k Lorimar version — both of them are obviously based on the same plastic Cataphractii Praetor:

Prabian & Lorimar comparison picture
While I wasn’t completely sold on the stock model for a while, it has really grown on me, due to its surprising versatility. And it does make for a pretty much perfect base for a true scale conversion, if you ask me!

And with that, we can mostly consider the Cataphractii case closed — expect to see more of these guys once I get some paint on them 😉

Until then, as always, thanks for looking and stay tuned for more!

Golden Legion Chapter Master WIP (11)

Lorimar – the post-Isstvan years

Posted in Conversions, Fluff, WIP, World Eaters with tags , , , , , , , , , , , , , , , , , on April 26, 2016 by krautscientist

For todays’s post, let us return to plastic models wearing Cataphractii Terminator armour for a bit. Because, even with the squad of five Cataphractii finished, there was still the matter of the Praetor model that came with the Betrayal at Calth box to take care of:

Betrayal at Calth release (17)
In many ways, it’s a rather strange model: On the one hand, it’s well designed and fairly elegantly engineered. Like most of GW’s newer plastic characters, it’s made up of a number of parts that lock together in a very clever way, creating a character model that definitely has the right amount of bulk, detail and depth. The armour is also a nice step up from the standard Cataphractii design and, along with the flowing cape and the more detailed pteryges leather straps, instantly communicates the fact that this guy is an officer. So far, so good, right?

But then there’s the pose: I cannot even begin to guess what made GW’s designers decide on such a rigidly posed model. Maybe they merely wanted to provide the model with some agency, instead of going for the classic “posing with outstretched weapon arms” look of the yesteryear? Or maybe the Praetor was designed as an opposite to Forgeworld’s own Praetor in Cataphractii armour?

Whatever the reason, the pose is definitely one of the model’s weaker parts for me, and it seemed like the one factor that would make any conversion rather challenging. Even with quite a number of fairly clever conversions appearing over at The Bolter & Chainsword, few versions of the Praetor managed to get rid of the somewhat pidgeon-toed stance of the base model — which really seemed at once central to the conversion and fairly challenging to me.

And maybe it was  that challenge that drew me towards attempting a conversion in the first place. I had originally planned to leave this guy for last, but when I recently started hitting a bit of a roll with my Catapphractii, I felt motivated enough to start working on the Praetor as well. There was just one problem, however:

You may remember that my 30k models are supposed to represent an earlier incarnation of my 40k army of choice: The World Eaters’ 4th assault company. And the 4th has one commander, and one commander alone: Lord Captain Lorimar. And I even already had a 30k model for him:

Lorimar then and now
The model shown above was originally mostly built and painted by AgnostosTheos, and I bought it from him when he sold off his collection of World Eaters about two years ago. It took very little work to turn the model into an earlier incarnation of Lorimar, and I am still reasonably happy with the way both versions of the character look next to each other — incidentally, you can read more about the models and the character that informed them here.

So was there actually any room for yet another version of Lorimar? Or for a different character serving as Praetor? Of course this whole discourse only really makes a lick of sense if you take the whole background part of the hobby seriously, but I am just funny that way in that I tend to build and paint characters, not just playing pieces. At least that is what it feels like to me.

In the end, however, the urge to create a badass Cataphractii Praetor got the better of me, and I decided to play this one by ear: If the resulting model ended up as another version of Lorimar, then I would find a place for him in my collection somehow.

So I started making some adjustments to the base model, and here’s what I ended up with after putting in the first bit of work:

WE Cataphractii Praetor WIP
Like I said, the base model is pretty cool in principle, but it’s also severly hampered by the somewhat rigid (and slightly uncomfortable looking) pose, so that was the part I really needed to change. I also knew that it wouldn’t do for a World Eater to focus so much on a shooting weapon, so I changed the model’s entire orientation.

The most important part was to cut off the right leg above the knee and slightly rotate it inwards. Such a small thing, really, but it was really key for making the pose far less awkward — in fact, it’s a neat little trick that I would recommend to anyone trying to change the model’s pose around a bit:
You cut right between the kneecap armour and the armour plate covering the hip (directly under that one line of decorative trim on the leg). There’s really only an area of about 0.5 mm width where you can make the cut without damaging either armour plate, so the sweet spot should be easy enough to find. Then you rotate the leg inwards, stopping once you’re happy with the pose. There’s going to be some damage, especially if you are trying to have both feet meet the ground at the same angle, but it’s really easy to repair with some plastic glue and some plastic shavings, plus the damage will be nearly invisible from the front. And if you are using the stock model’s cape, the damage will be neatly camouflaged by the Praetor’s cape.

The other considerable change I made to the base model was to cut off the hand holding the combi-bolter and replace it with that massive chainsword from the Space Wolves Upgrade Pack — incidentally, that sword was one of the two reasons that made me pick up that sprue in the first place, and its mass and length seemed ideal for a World Eaters Praetor.

And finally, I cut away the model’s original head, mostly to allow for a head facing in a different direction. As it happened, however, I had an extra head from the chaos warshrine priest still knocking about – the exact head I also used on 40k Lorimar – so I decided to use it in my early mockup.

With the basic pose out of the way, the next part was to add some detail that would make the model read as an actual World Eater. Seeing how the stock model’s armour was already very detailed, I had to try not to go overboard, lest the model end up looking too busy. In the end, I think I managed to come up with a fairly good solution, though:

WE Cataphractii Praetor WIP (2)

WE Cataphractii Praetor WIP (1)

The bandolier of skulls is a classic for World Eaters, especially since the more recent fluff has given it a deliciously ambiguous nature: Are those the skulls of enemies, displayed as trophies? Or are they the remains of honoured battle brothers, allowed to see the field of battle once more? Or a little from column A and a little from column B, perhaps?

I also added another shackle bit from the AoS Bloodreavers — as DexterKong astutely pointed out when commenting on my Cataphractii, shackles are such a tragically fitting accessory for 30k World Eaters, are they not?

And finally, I tried to give the a slightly more ornate version of the topknot the other Cataphractii have, spliced together from a topknot that came with the chaos chariot and the tail of a Marauder horse. I like how the front of the piece could be seen as a stylised Iron Halo or as the iconic arrows of chaos…

The one thing that didn’t sit right with me was the chainfist. Granted, it works pretty well with the tweaked pose — arguably better than on the stock model, really. But I just couldn’t help it, I had to mock up an alternate arm holding an axe.

I used the upper arm from a plastic 40k Terminator (which had to be shaved down quite a bit) and the forearm from an Age of Sigmar Stormcast Eternal, as the curves of the armour fit the overall Cataphractii look pretty well. As for the axe, I chose the same blade I already used on 40k Lorimar. And here’s the model with an alternate arm:

WE Cataphractii Praetor WIP (11)
And seeing the axe arm in place actually decided things for me: I would be turning this guy into a representation of Lorimar, after all.
Incidentally, when putting all three models in a row, I realised that there was a really nice sense of visual progression between the three. Take a look:

Lorimar comparison

The version on the left represents Lorimar as a younger officer, say a Secutor-Sergeant, during the latter stages of the Great Crusade, or even as a young Captain, having just taken command of the 4th after winning his captaincy in the fighting pits. The new version in the middle is him during the Heresy: The more ostentatious armour shows his newfound confidence in his command. And he has started to discard the trappings of a loyalist Astartes: Where his younger version is armed with weapons bearing a strong aquila motif, his new weapons are more vicious and cruel-looking, and there’s not an aquila to be seen — I really like how his weapons get less Imperial as he goes! Finally, the model on the rightis him in the 40k setting, now in fully Khornate regalia.

So basically all that was left for the conversion at this point was some cleanup work. One interesting part is that I have not yet glued the different parts of the model together — I think this will make painting quite a bit easier in this case, because the seams between the parts are cleverly hidden. Anyway, here’s the model as it looks right now:

WE Cataphractii Praetor WIP (15)
WE Cataphractii Praetor WIP (16)
One thing I still want to do is to make his axe look slightly less chaotic. I am going to fill in the chips and nicks in the blade with GS, provided I manage to pull it off in a clean enough way. As for the chaotic eye, a fellow forumite on a big German forum came up with the idea to keep the eye, but to fill in the chaotic arrows around it, making it look like some kind of decorative jewel. I think I rather like that idea, as just removing everything would just create a huge flat area on the axe blade.

One small detail I am really happy with is how I have used some leather straps from another Cataphractii Praetor model to close the gaps between the straps that were already there:

WE Cataphractii Praetor WIP (18)
Shaving these off from the source model’s shoulders was slightly fiddly, but the extra effort was definitely worth it!

And here’s a look at the model’s back. Careful observers will spot the stylised Khornate rune adorning the crossguard of Lorimar’s sword (I put it there to replace a wolf skull):

WE Cataphractii Praetor WIP (17)
All in all, I am very happy with the model, both because it makes for a pretty cool “missing link” between the two versions of Lorimar I already have, and because I have managed to tweak just about everything that I didn’t like about the stock Cataphractii Praetor. In fact, having discovered how easy it is to carefully turn the base model into something quite different, I would basically recommend this guy to every hobbyist looking for a characterful base model to turn into a commander for their own Space Marines! What’s more, as has already been postulated by Commissar Molotov, the Praetor is also a pretty ideal base morel for a true scale conversion — as it happens, I am working on a true scale Chapter Master based on this model right now, but that is a story for another time 😉

Before I wind up this post, here’s a look of Captain Lorimar with his Cataphractii bodyguard:

Lorimar's Fist 30k WIP (4)
As always, thanks for looking and stay tuned for more!