Archive for painting in progress

A Short Knight, pt. 2

Posted in 40k, Chaos, Conversions, paintjob, World Eaters with tags , , , , , , , , , , , , , , , , , , on November 10, 2018 by krautscientist

Hey everyone, here’s the next look at my current project, the recreation of my 28mm Renegade Knight Questoris, Gilgamesh, the Warrior King, at the Adeptus Titanicus scale. I haven’t had much hobby time since my update, but I’ve tried to make it count. So let’s take a look, shall we?

First of all, this is where we left off last time:

While the similarity between the Adeptus Titanicus Knight Questoris and its bigger 28mm version already astonished me during the building stages, the parallels even extended to the actual painting process: Due to the way the model comes together, it’s actually possible to keep most of the armour plates, especially the big top carapace and shoulder pads, separate from the Knight’s “skeleton” during painting, so it was once again a matter of undercoating the skeleton in silver and the armour plates in red, then work from there.

And since this was my biggest alteration to the stock model, I did of course have to start with the pilot, trying the best I could to have the paintjob make up for the lack of sculpted detail:


Even at this stage, I was already reasonably happy with the way the chibi-version of Baron Harrowthorne looked, so after that, it was mostly a matter of carefully blocking in all of the base colours. Due to the delicate sculpt of the Knight, this was a bit more fiddly than on, say, a bog standard Space Marine model, but it was still fairly quick work. Here’s Chibi Gilgamesh 2.0 with all the base colours and washes in place:

And now came the delightful part: I carefully tried to match as many visual cues from the bigger version as possible — including the decals used on the original Gilgamesh. In some cases, I was able to use smaller decals that were a close – or even perfect – fit, in other cases (on the kneepads, for instance), I had to use a fine liner instead.

But anyway, enough talk, let’s take a look at the mostly finished model:

Just to remind you, here’s the big version:

And here’s what I have right now:


Pretty close, wouldn’t you agree?

As for Baron Harrowthorne and the cockpit, I had to give the area another small round of tweaks, of course:

So, once again, let’s start with the bigger version:


And here’s the Chibi-Baron:

As I’ve said before, since there is so very little actual detail on the pilot, I’ve had to use the paintjob to suggest detail were none extists, and to create an evocation, for lack of a better word, of the much bigger, more detailed 28mm pilot. I am pretty happy with the outcome, though — if you take a closer look you can even see the glowing buttons on the control panel:

And here’s another comparison picture with my earlier Chibi-Knight kitbash:

So a few very minor tweaks notwithstanding, the new Chibi Knight is basically finished at this point — except for the basing, that is, and I do have a rather nifty plan for that. Let’s hope it works out!

Until then, however, I would love to hear what you think! And, as always, thanks for looking and stay tuned for more!

Advertisements

Feet on the ground! Painting my Chaos Knight, pt. 4

Posted in 40k, Chaos, Conversions, paintjob, WIP, World Eaters with tags , , , , , , , , , , , , , , , , , , , , on September 30, 2015 by krautscientist

So, what about that Chaos Knight I’ve been working on for quite a while now? While recent events have slowed down work on the model a bit, I do have a fresh update for you that should give you a pretty good idea as to what the finished model is going to look like, so strap yourselves in!

When we last encountered the Knight, the entire top carapace was still only undercoated black, so this was the next area I needed to tackle. Thankfully, I had purchased a Citadel L Base Brush from my FLGS, which made it far easier to produce an even coat of red on this huge area. Here’s what the Knight looked like with the carapace painted red and the first details picked out:

Chaos Knight PIP (111)

While I realise that not everyone will like the armour plates painted entirely in red, this was very much my plan from the beginning — and, like I said, if it had been my call, the fabled “Red Period” at GW would never have ended πŸ˜‰

I’ll still need to add some further detail work, but I’ve already finished the top hatch. Here’s a closer look:

Chaos Knight PIP (113)
And while I was at it, I also had some fun with the interior:

Chaos Knight PIP (114)
Hey there, Baron Harrowthorne! πŸ˜‰

Speaking of which, seeing FW’s recently released Knight Scion has made me pretty happy, seeing how I seem to have come pretty close to the “official” version of a Knight pilot with my own, kitbashed version — at least when it comes to the position and the controls for the Knight:

FW Knight ScionOh, and another detail: Those of you paying close attention may have spotted a suspicious model in that picture of the Knight above. This little guy here:

Chibi-Knight WIP (19)
This is a small “Gaiden Project” dubbed the “Chibi-Knight” — a roughly Epic-scaled version of my Chaos Knight, inspired by fellow German hobbyist Paule’s excellent thread about kitbashing Epic Titans. Coming up with a model to match the bigger version fairly closely has been a lot of fun, and I think I’ve done a reasonably good job of it, wouldn’t you agree? Anyway, expect to see more of this little guy at some point πŸ˜‰

And that’s where I stopped working on the Knight for a while when, well…real life happened. But this past week, I’ve felt the need to do something creative and fun, so I’ve come up with this:

Chaos Knight base (1)
Chaos Knight base (2)
Chaos Knight base (3)

As you will probably have guessed, this will be the base for my Chaos Knight. As it happens, I’ve been going back and forth regarding what to put on the base: On the one hand, it’s really easy to make bases of this size look tacky by overcluttering them. But the Knight deserved a suitable base. And yet. And still…

In the end, I realised that there are few things more emblematic of the crumbling Imperium of Man than a toppled and destroyed Astartes statue — plus the piece from the Honoured Imperium kit was a pretty nice fit scale-wise! So I went with that, and I am pretty pleased with the general direction, if I do say so myself.

So here’s the – still unfinished (!) – Knight, provisionally placed on top of it:

Chaos Knight PIP (117)
Chaos Knight PIP (121)
Chaos Knight PIP (119)
Chaos Knight PIP (122)
And a closer look at the way the model and base interact:

Chaos Knight PIP (118)
Chaos Knight PIP (118b)
While the base is suitably impressive for a model of this size, I think it does a pretty good job of not drawing a way too much attention from the true star of the show. If anything, it may actually be a tad too monochromatic, as pointed out by my buddy Biohazard. Yet I don’t want to screw up both the painting I have so far and the fact that it matches the bases of my World Eaters — any ideas?

Oh, and there’s one last thing I did: I finished the banner dangling between the Knight’s legs, using some decals to create a suitable design. The front received a World Eaters legion badge in red:

Chaos Knight PIP (125)
Chaos Knight PIP (127)
As simple as this design looks, it was a veritable nightmare to get right! I started with a decal from the FW World Eaters decal sheet, but it needed lots of decal softener and several coats of varnish to finally conform to the banner’s surface. And even then, what had been a rich, ox-blood red on the decal sheet turned into a prety off-putting shade of pink against the dark background, so I ended up painting over the decal several times, coloring in the legion badge, so to speak, with my brush.

Fortunately enough, the rear was far less of a hassle — in fact, designing some of the battle honours won by the Knight during its long years of service was actually quite a bit of fun! Take a look:

Chaos Knight PIP (129)

So, here’s the Knight as it stands right now:

Chaos Knight PIP (124)
Chaos Knight PIP (126)
Chaos Knight PIP (130)
Chaos Knight PIP (128)

When all is said and done, I am very happy with the way this guy is turning out, even though there’s still quite a bit of detail work left to do. Roughly speaking, I’d place the entire model at about two thirds done right now, although most of the stuff left to do is fairly minor detail work. But the Knight is shaping up to be quite the centre piece, wouldn’t you agree?

Chaos Knight PIP (131)

As always, let me know what you think! And, of course, thanks for looking and stay tuned for more!

Chaos Knight PIP (132)

 

Getting dressed… Painting my Chaos Knight, pt. 3

Posted in 40k, Chaos, Conversions, paintjob, WIP, World Eaters with tags , , , , , , , , , , , , , , , , , , on August 12, 2015 by krautscientist

Hey everyone, another Knight-related update today. The original plan was to post a review of the recent Stormcast Eternals release today, but I spent yesterday in Frankfurt, visiting a pretty cool exhibition about the intertwined histories of film and videogames at the Deutsches Filmmuseum — the museum also had some pretty cool stuff apart from that particular exhibition. Such as this:

Xenomorph (2)
Xenomorph (1)
Aaanyway, this left me with very little time for expansive writeups on the old blog, so you will have to content yourselves with some more incremental progress on my Chaos Knight — I realise that this style of updates may not be all that spectacular, but bear with me here: For one, this is easily the biggest and most complex single project of my hobby life so far, so I may be forgiven for taking it slowly (and also for documenting my progress rather meticulously). This also allows me to showcase some details that I am especially proud of, as it happens — so I hope you’re not yet bored of the model yet πŸ˜‰

When we last saw the Chaos Knight, I was hard at work on its daemon-faced breastplate. And indeed, here’s the model with a more complete version of that breastplate already mounted in place:

Chaos Knight PIP (84)
I wasn’t sure at first about whether or not to paint the eyes, but in the end I think the effect works rather nicely without being to cartoony. The teeth will need some additional highlighting, though.

I quickly added the lower jaw as well:

Chaos Knight PIP (87)
Once again, the area will need some more work — in fact, most of the armoured areas that are looking pretty much finished in the pictures are anything but: I’ll still need to add decals, further detail, some grime and maybe a little weathering. Anyway, this is what the Knight looked like at this point:

Chaos Knight PIP (88)
And lest we forget, a quick look at the Baron in his cockpit πŸ˜‰

Chaos Knight PIP (85)
While the top carapace has only been undercoated, I think the picture shows rather nicely how the design of the cockpit and pilot works rather nicely, even when only glimpsed through the open top hatch (in any case, I’ll be leaving the carapace detachable, though).

This was also the point where I had to start working on the more complicated parts of the Knight’s armour: The pauldrons were especially daunting to me, mostly because I had planned adding a World Eaters decal to one of them. Let’s take a closer look at how that went in a minute. Before that, here’s a look at the Knight with its mostly finished faceplate in place:

Chaos Knight PIP (89)
And, once again, the entire model so far:

Chaos Knight PIP (92)
Chaos Knight PIP (91)
Chaos Knight PIP (95)
I think by now we can really see this guy coming together, wouldn’t you agree? One armour plate at a time…

As for the pauldrons, I am really happy that they are mostly finished now. Here’s the left one, complete with a big icon of Khorne and some additional totems and trophies:

Chaos Knight PIP (97)
Paintig this part was a bit fiddly because all the small trinkets had already been glued in place beforehand, but it wasn’t that much of a problem. I really like the look and feel of the design — it seems chaotic without being overly warped or mutated. The chains are also a callback to the World Eaters gladiatorial tendencies. And the pauldron actually mirrors the design of the shin armour on the same side.

The true star of the show is the right pauldron, though — complete with a World Eaters icon and numbers for the legion and company the Knight has been attached to:

Chaos Knight PIP (94)
I had been planning to use a Forgeworld decal (kindly provided by Mr. poom, no less) for a long time, although the process turned out to be just the nightmare I had anticipated: Making a decal conform to a curved surface can be tiring enough at the best of times, but I found out that it was even more of a hassle here, in spite of copious amounts of decal softener. Which makes me all the more happy to have pulled it off like this — save for a few tiny irregularities, it ended up looking fairly convincing, don’t you think? I also added some weathering on top in order to represent places where the paint had been slightly damaged and nicked.

Once again, the right pauldron shares similarities with the corresponding shin armour — especially since both use the same spikes (which, in turn, are a callback to the studded parts of Heresy-era Astartes armour).

So here’s the entire model:

Chaos Knight PIP (100)
Next stop: the carapace. And boy what a job that will be! Wish me luck! πŸ˜‰

Anyway, so much for the progress on my Chaos Knight. If you have any feedback or suggestions, I’d love to hear from you!

Before I tune out for today, allow me to share something very cool with you: Fellow hobbyist Bloodygoodtime sent me a wonderful little sketch of Lord Captain Lorimar. Take a look:

illustration by Bloodygoodtime

illustration by Bloodygoodtime

I almost laughed myself off my chair when I first saw it, because it’s just perfect: badass and adorable at the same time, and it really captures the very essence of the character for me — in fact, it makes me wonder whether the Eternal Hunt wouldn’t make for an excellent Saturday morning cartoon… Anyway, a huge thank you, mate! You rock!

And, of course, to everyone else: Thanks for looking and stay tuned for more!

The Devil is in the detail… Painting my Chaos Knight, pt. 2

Posted in 40k, Chaos, Conversions, paintjob, WIP, World Eaters with tags , , , , , , , , , , , , , , , , , , , on August 5, 2015 by krautscientist

Having managed to bring my Chaos Knight back from the brink after the undercoating mishap, it was finally time to get to work on some of the detail I hoped would make the model into something truly special. So today I would like to show you some of the detail work on the model — some of these areas seemed like very daunting tasks beforehand, but have ended up really well, if I do say so myself.

Anyway, after lots and lots of weathering and trying to make the metallic areas actually look like metal, it was good tor return to something rather different. I already showed you some progress on both the pilot and the cockpit in my last post, and so I got in some more work on those two areas. So here’s the finished Baron Augustus Melchia Harrowthorne in his cockpit.

Chaos Knight PIP (54)
This guy is basically at the heart of this whole project, as thinking of a backstory for a traitorous Knight pilot was what provoked my building a Chaos Knight in the first place. Which is why it feels really good to finally see him in his place of honour like that! πŸ™‚

I actually spent quite a bit of time coming up with just the right look for the Baron, as I tried to figure out just what kind of pilot I wanted (and how I wanted him to interact with his machine). There are many different kinds of Imperial Knight cockpits out there, and I am very willing to accept any kind of pilot interface as long as the artist in question really, really nails it. For instance, my understanding is that control of a Knight is heavily based on some kind of neural interfacing, where you actually control the machine with your thoughts, right? But I also love the idea of some kind of mechanic control, and when it’s well realised, I think it really adds something to the model. Take Jeromgb’s absolutely fantastic cockpit here: It’s very retro, almost WWI in a way, and the pilot is much more “hands on” than my own take on the matter, yet it’s perfectly executed and absolutely believable, and it really sells the concept of a pilot doing his darnedest to stay one step ahead of his opponent.

By the same token, if you look at Forgeworld’s Titan Princeps models, they all seem to have some physical controls as well as neural interfaces — and I think it really makes sense for a setting as eclectic and retro-futuristic as 40k to fall back on a mix of both ways. What’s more, given the fact that the Knight Households are such a very ancient remnant of pre-Imperial times, with each machine a millennia-old artifact, I think it’s totally conceivable that there are as many types of interface as there are Knight worlds.

As for my own model, I wanted Harrowthorne to have some kind of physical control, but I also wanted him to look very dignified and noble, which is why I heavily based him on the Princeps from FW’s Warhound Titan. As for the actual points of interface on my model, Harrowthorne is rather extensively augmented, as you can see: In addition to that, there’s some cabling on the back of his head, and his throne has several parts that look like ports for a possible interface, so I imagine him to be plugged into those. All in all, I really think he looks like quite the character, and I am very happy with him:

Baron Harrowthorne PIP (6)
Fun fact: Harrowthorne’s paintjob was actually heavily inspired by the Dark Jedi Jerec, villain of the first Jedi Knight videogame…

Baron Harrowthorne PIP (8)

Here’s another picture of the Knight’s interior: You can see both the cockpit and the engine compartment in their basically finished forms. Since all of this was basically scratchbuilt and kitbashed, it remains among my favourite parts of the model — and it’s pretty cool that the solution I came up with ended up fairly similar to the “official” Knight interiors produced by Forgeworld (even moreso because I actually came up with mine before Forgeworld’s version was even available!):

Chaos Knight PIP (62)

The above picture also shows how I have gone for a little “special effect” with the flames emerging from the additional baroque outlets on the Knight’s back: My idea was that these would function as some kind of extra vent, allowing the machine to vent excessive warp power or what have you (don’t overthink this bit, I only wanted it to look cool πŸ˜‰ ). Anyway, my original plan was to paint the flames in a slightly more supernatural blue, but I was afraid the effect would end up looking too unnatural and toylike. So I went with a slightly more naturalistic approach — and I was fortunate enough to find an absolutely excellent tutorial for painting flames over at Tale of Painters, which allowed me to finish the whole area in very short order, even though I’d never attempted painting natural looking flames before! The tutorial also provided a sweet tip for using a glaze made from Mephiston Red and Lahmian Medium to create an effect resembling glowing coals around the flames — just what I needed, as it makes the area surrounding the flames look interesting without diverting too much attention towards it.

Still inspired by the success of my first-time flame painting, I then tackled the one area I was really rather afraid of: The monitors and displays inside the cockpit. Since the cockpit had already been permanently assembled at this point, I had set myself up for a rather fiddly task. But while the challenge turned out to be just as fiddly as I had expected, I am really rather happy with the result:

Chaos Knight PIP (67)
I’m certainly not great with freehanding, but I am still pretty happy with the suggested data streams on those tiny monitors. I also used the aforementioned Mephiston Red glaze to give some of the buttons a glowing look:

Chaos Knight PIP (66)
And, once again, here’s the Baron inside the now finished cockpit:

Chaos Knight PIP (68)

Chaos Knight PIP (69)
Fellow hobbyist The Hydra pointed out that it would have been really funny to have one of the monitors display a game of Pong! Dang, what a missed opportunity! πŸ˜‰

But seriously, I am really, really happy with the finished cockpit!

So the Knight’s skeleton is bascially finished at this point: I tidied up the last few rough spots and added some leftover Heldrake armour plates on the arms. Here’s what I ended up with:

Chaos Knight PIP (71)

Chaos Knight PIP (70)
Chaos Knight PIP (72)

Chaos Knight PIP (73)
Chaos Knight PIP (74)
Chaos Knight PIP (75)
Chaos Knight PIP (76)

Chaos Knight PIP (77)

Chaos Knight PIP (78)

On a related note, let me take a moment to address Forgeworld’s “official” Chaos Knight kit: It was actually interesting to see this being released recently, after it had already made a sneaky appearance in the new Warhammer: World displays… πŸ˜‰

Forgeworld Chaos Knight (1)
Forgeworld Chaos Knight (2)
But to be perfectly honest, I am almost a little underwhelmed by the model. Sure, it clearly reads as a Chaos Knight. But doesn’t the design seem like they phoned it in a bit, at least compared with Forgeworld’s regular output? It seems very generically chaotic to me, especially with the warped armour and teeth around the head. And some touches are pretty close to my own version, as it happens: Just take a look at the chaos star on the back of the cannon, the spikes on the chainsword and the reactor section…

Forgeworld Chaos Knight (3)

I think when all is said and done, this should work as a pretty serviceable basic template for a Chaos Knight, although it might need some additional conversion and kitbashing to really bring it to the next level. However, if I need to further convert the model anyway, I might as well make it an all plastic conversion in the first place and circumvent the issue of potentiall having to deal with ill-fitting resin parts, right? Or one could go for the Kytan Daemon Engine of Khorne, which seems like the more interesting project, at least for a follower of Khorne like yours truly… πŸ˜‰

It’s a nice enough kit, surely, but I am actually rather relieved that it’s not that much more awesome than my own conversion — at least that’s how I feel about it. This means I can happily finish my own model without feeling like I missed out on an even cooler version. And one advantage of the release is that we know have semi-official Chaos Knight rules! Yay!

 

All the more incentive to keep plugging away on my own Chaos Knight. And I have already made pretty good headway regarding the armour plates. Let me show you a final sneak peek or two of what is to come:

The Knight with its leg armour in varying stages of completion:

Chaos Knight PIP (79)
And here’s a first look at the PIP belly plate:

Chaos Knight PIP (80)
Oh, and there’s one thing you guys can help me with: I want to add a decal to the Knight that represents the Machine’s honorary membership in the Legio Audax (The “Ember Wolves”), the Titan Legion that fought alongside the World Eaters during the Heresy. So I was looking at a suitably wolf-y decal in order to represent that affiliation: At first I wanted to use one of the War Hounds decals, but those definitely show a dog, not a wolf. So which of the following do you think would work best for the intended effect (As for placement, I’m thinking one of the kneecaps)?

Possible Audax decals
As it happens, some hobbyists have suggested some very cool – and slightly less common – SW decals to represent the Legio: The flame wolf (playing on the whole “Ember Wolves” thing):

Flame WolfOr these very cool, slightly more feral looking symbols that I hadn’t even seen before:

Possible Audax decals (2)
Are these even available as decals? And if so, if anyone has some of these left, (especially the more hirsute looking wolf heads dead centre and in the bottom row), feel free to send them my way! πŸ˜‰

 

So yeah, I think you could really say I am having a blast with this big boy right now, even though painting the model is turning out to be a ton of work. So stay tuned, there should be more shortly πŸ˜‰

If you have any feedback or suggestions, I’d love to hear from you, of course. And, as always, thanks for looking and stay tuned for more!

Engine of destruction, pt. 2

Posted in 40k, Chaos, Conversions, paintjob, WIP, World Eaters with tags , , , , , , , , , , , , , , , , on August 30, 2013 by krautscientist

Right, I promised you that you wouldn’t have to wait long for the next update on my Dreadknight/Decimator conversion, so here goes. Let me begin by admitting that I’m a little disappointed by the lack of reactions to the painted model so far: That really doesn’t bode well for the publich opinion on this guy, I suppose. Let’s just hope people are holding back all their constructive feedback for the finished model…

Anyway, back to the matter at hand! Here’s where we left off last time:

Wargrinder PIP (5)
Time to get this bad boy some arms, right? Unfortunately, I didn’t take any PIP photos of the arms, as I painted them in one, frantic session, eager to finally see the model completely assembled and painted! Once again, the arms were detailed enough to almost be counted as models in their own right, yet the slightly bigger size made painting them a fairly pleasant affair.

I also made a list of all the little details that I had yet to paint and used the time it took for the paint on the arms to dry to get all the fiddly detail and additional accents out of the way.

When all the different sub-assemblies had been completed, the time had come to carefully glue everything together. While maybe I should have gone out to pick up some really strong superglue before putting everything together, I really couldn’t wait until the next day when I had finished all the components at about ten in the evening. So I used a couple of items to stabilise the position of the arms, while the model was resting on my keyboard, no less – yes, talk about patience and professionalism…Β  πŸ˜‰

Wargrinder PIP (17)
But after leaving the model to dry overnight, everything was stable enough, and the model itself was finally completed.

So now it’s finally time to take a look at the assembled model. Meet the Wargrinder, ladies and gentlemen:

Wargrinder (10)
Wargrinder (9)
Wargrinder (8)
Wargrinder (7)
Wargrinder (6)
Wargrinder (5)
Wargrinder (4)
Wargrinder (3)
Wargrinder (2)
Wargrinder (1)
Quite a beast, don’t you think? The arms do a pretty good job of making it look even less than a stock Dreadknight and more like a daemon engine. And as you can see, some final detail was added during the assembly process: Two Ogre gut plates were once again used to represent the World Eaters’ legion badge. And two semi-circular trophy racks from the chaos vehicle sprue provide some additional chaos flair while also bulking out the model’s silhouette some more.

Let’s take a look at a couple of details:

Wargrinder (13)
Like I said before, I realise that the head probably isn’t for anybody. But I am rather happy with the way it turned out: The model looks like an emotionless, relentless killing machine, and that’s exactly the look I wanted to achieve. And even if you don’t like the head, it should really be easy to find a suitable replacement, in case somebody is planning a similar conversion.

I also used one of my beloved, simple OSL effects on the weapon arm’s plasma coils:

Wargrinder (14)
The huge coils are really an open invitation to painters to go for an effect like that, and even though I kept it all rather simple, the finished arm makes for a nice eyecatcher.

Wargrinder (17)
Another look at the model’s back: The exhaust pipes were given a pass of Vallejo Smoke Ink to make them look even more dark and grimy. I am also very much in love with that brass etched symbol of Khorne sponsored by PDH!

 

To tell you the truth, all in all, I probably couldn’t be any happier with the model: The different head (while clearly a case of love it or hate it) makes it different enough from Chris’ conversion so as not to seem like a retread of the same idea. And the paintjob really ties together the different parts, making them look like they were meant to be used in that way. Painting this guy also was a real blast!

I am still not 100% done, though: The base still needs to be built and painted — and it goes without saying that a model as imposing as this deserves a suitably impressive base to go with it. Fortunately, I already have an idea, although it may take some time for me to get around to actually completing it.

Until then, I would love to hear your opinion on the model, so feel free to drop me a line or two in the comments section! And, as always, thanks for looking and stay tuned for more!

Wargrinder (16)

Engine of destruction, pt. 1

Posted in 40k, Chaos, Conversions, paintjob, WIP, World Eaters with tags , , , , , , , , , , , , , , , , on August 28, 2013 by krautscientist

So, time to revisit that mysterious model from the fuzzy teaser shot, I think. Some of you may already have recognised the model in question, and to tell you the truth, ever since I built my converted Dreadknight / counts as Decimator (inspired by Chris’ fantastic conversion over at A Host of Word Bearers), I’ve been itching to get this big boy painted. While painting the model seemed like a rather daunting task at first, painting my various Chaos Dreadnoughts has taught me that models at a slightly bigger scale can be real fun to paint, if only because the actual painting can be less fiddly due to the increased size.

In any case, there was really only one way to find out…

So, how did it go? Just to remind you, here’s where we left off last time:

kitbashed Decimator WIP (9)
Before breaking out the paints, I used the last possible opportunity to add some final bitz: A chaos smoke launcher was cut in half, with both halves added to the cowling behind the model’s head. A chain with dangling skulls was also added to the reactor on the model’s back.

The next step was to break down the model into the different sub assemblies and get everything undercoated in chaos black. Thankfully, this was pretty fast work. Here’s most of the model undercoated and tacked together (again):

Wargrinder PIP (1)
I then started painting the different sub assemblies, starting with the legs. Fortunately enough, my predicition proved correct: Painting the model turned out to be quite a lot of fun!

While larger models take much more paint to be completed, you can also cover much more ground and work with larger brushes, without having to worry about all the small nooks and crannies — at least at first…

So a short while later, the legs were basically finished:

Wargrinder PIP (2)
At this point, I really liked where this was going and I was basically hooked. So I pressed on, painting the torso next…

Wargrinder PIP (3)
As you can see, the amount of cables and metal doodads on the torso front meant that I could use a healthy dose of washes to make the metal look suitably dark and oily. I was also happy to finally see the head painted (but we’ll take a closer look at that in a minute). The last parts for the torso to be painted were the armour plates for the model’s chest. I quickly finished these, then tacked together what I had so far:

Wargrinder PIP (11)
Wargrinder PIP (10)
Wargrinder PIP (9)
Wargrinder PIP (8)
Wargrinder PIP (7)
Wargrinder PIP (6)
I am actually pretty pleased with the WIP model so far. The paintjob already does a fairly good job of blending together the different parts used in the conversion.

On a related note, I realise that the use of a head from an 80s’ toy was a point of contention for some. So my hope was that the paintjob would go a ways towards making it look like an actual part of the model. Take a look:

Wargrinder PIP (12)
While I am pretty sure that this particular choice of head will never make everybody happy, I am pretty pleased with the result: I don’t think it looks that much like an action figure any more. As you can see, I also added a simple blending effect on the models visor, trying to ride the cylon motif for all that it’s worth πŸ˜‰

A brass etched symbol of Khorne (kindly sponsored by PDH — cheers, mate!) was added to the armour plate on the model’s shoulders:

Wargrinder PIP (14)
You may say that it looks like it’s the wrong way around: a result of the plate originally being positioned slightly differently. In any case, it fits much better this way around anyway, so there is little to be done.

Again, I am really pretty happy with the model so far, even though it’s not yet complete: The next step, obviously, is to paint the model’s arms. And, of course, a suitably impressive base will have to be designed and painted at some point. Expect the next update pretty soon, though, because I am rather stoked for finishing this model.

Until then, feel free to let me know what you think in the comments! And, as always, thanks for looking and stay tuned for more!

Wargrinder PIP (15)