Archive for ordo malleus

State of the Hunt, Week 37/2018: A time to build…

Posted in 40k, Conversions, Inq28, Inquisitor, Uncategorized, WIP with tags , , , , , , , , , , , , , , , , , , , , , , , , , on September 10, 2018 by krautscientist

After another week or so without any hobby time to speak of, I was finally able to make some time for cutting up little plastic men last weekend, and all the kitbashes I have wanted to do for a while – and couldn’t – seemed to just keep bubbling to the surface, so to speak πŸ˜‰ So for today, allow me to share what is currently on my desk:

I. Iron Man

Back in April, when I picked up the AdMech part of the Forgebane boxed set fairly cheaply — and mostly in an attempt to get my hands on the Armiger Warglaives (in order to, eventually, do stuff like this and this). This also had the side effect of giving me another set of Skitarii Rangers/Vanguard, and also another Tech-Priest Dominus. And after a while, I started to experiment with parts from the latter, in an attempt to make yet another high-ranking member of the Adeptus Mechanicus. Here’s what I came up with:

As you can see, the two main ideas here were to turn around the lower body (for a fairly different look, interestingly enough) and to swap in some Kataphron bitz. Both of these ideas weren’t exactly new, but at least it felt as though I might be on to something. The model still seemed a bit too unbalanced, however, and maybe too much like a ship plowing through the waves πŸ˜‰

But last week I finally had the time to make some serious tweaks to the Tech-Priest and try to work out all of the various kinks. Take a look:



I tried to make him look a bit more grounded in his pose and composition. Plus I had wanted to use that alternate Magos Dominus head with the mitre for quite a while now — and I think it works really well with the more upright pose, compared to the standard Dominus. The top of the staff/axe has also been replaced, mostly to add yet another way to distinguish the new model from my older, mostly uncoverted Tech-Priest Dominus:

I really like how the models share at least half of their parts, yet still look fairly different πŸ˜‰

In fact, I have made even more tweaks to the model, adding a piece of parchment and coming up with a slightly better setup for that secondary set of arms:

And I think the model is really starting to come together. Some people on the forums pointed out how they thought the new axe blade wasn’t a good fit, but I respectfully disagree with that notion: If anything, that blade always seemed like a poor match for a Space Marine weapon to me, because the blade has this slightly weird look. At the same time, it does seem more at home with the weird arcane tech of the Adeptus Mechanicus to me, plus that censer bit at the center fits the priestly nature of the AdMech pretty well, if you ask me — but this is totally a question of personal preference, of course.

II. Shark Attack

Since it felt so good to be able to get in some hobby time again, I built yet another model, the – provisionally – last member for my true scale Deathwatch killteam, a member of the Carcharodons:

Where the rest of the killteam is Primaris-based (for that look somewhere between classic Mk. VII and the more hi-tech looking Mk. VIII [?!] Deatwatch armour), I wanted this guy to be wearing a suit of bulky, archaic armour, as a shout out to the chapter’s history of long isolation and drifting through the farthest reaches of known space with next to no contact with the rest of the Imperium, so I used parts from one of the plastic Tartaros Terminators, spliced together (rather cleverly, if I do say so myself) with Primaris parts. To give credit where credit is due, however, some of Doghouse’s seminal truescale conversion work was very much on my mind when building the model.

The original idea was to come up with an approximation of Mk. V armour, but I really ended up going for a more general pre-heresy look, to show how the armour might have been repaired and patched up with different parts over time. So touches from several different armour marks are now present, from the Mk. III backpack to the slightly Mk. V-ish legs, leading to a generally archaic look.

I also wanted to convey the feeling that this guy is very much used to wading into the fray of melee, swinging his weapons and making a huge mess as teeth and claws are shattering against his massive warplate. All in all, I am pretty happy with the kitbash so far, with one caveat: In spite of my best efforts, he’s a tad shorter than the Primaris-based models, something that I’ll hopefully be able to distract from with some deft basing πŸ˜‰

In addition to the guy’s size, there are two small touches that I am not perfectly happy with yet: One, the left shoulder pad is only a placeholder until I manage to source yet another one of those spiffy “new” Deathwatch pads πŸ˜‰ Two, everybody seems to be hating that shark jaw codpiece, so I might have to reconsider that element — it’s actually a bit frustrating, really:Β  because it seems like the perfect part to add some chapter-specific decoration, yet the placement is very much the problem: My original plan was to use it on the Marine’s collar, but it seems that would overclutter the head area quite a bit. If anyone has a smart idea, I would love to hear it!

III. Going feral

And finally, another kitbash I have wanted to do for quite a while: A feral worlder based on the AoS Darkoath Chieftain:

It occured to me a while ago that we don’t get to see nearly enough feral worlders in Inquisitorial retinues (I was also heavily influenced by all the sweet “tech-barbarians” appearing in Horizon Zero Dawn, admittedly), and the chieftain just seemed like the perfect base model — there’s a fair bit of a SlΓ‘ine vibe about the model, and that really made me want to work with it:

 

When it came to the actual conversion, the stock model was so detailed and delicate that I had to pay attention to carefully bring it into the 40k setting without going overboard, so I limited myself to adding a slightly futuristic touch here and there, via weapons, ammunition or wargear. As a nice side effect, this strategy also allowed me to exchange my least favourite part of the stock model as well – the slightly weird blade of the sword – and replace it with a nice, vicious chainsword courtesy of the CSM Raptors πŸ˜‰

Seeing how tall this guy is, I think he would make a good follower for the – equally imposing – Inquisitrix Elianu, especially since she looks like she might have come from a warrior culture of some sort herself:


I think the various tokens and trophies scattered around the model also lend themselves well to a bit of a Daemonhunter vibe — I also chose the left hand gripping a severed Tzaangor head for the same reason, as it just seemed to hint at an affiliation with the Inquisitional Ordo dealing with the more daemonic servants of the ruinous powers. There’s also a tech-barbarian style character in John French’s latest book for the Horusian Wars series who was on my mind when I converted the model.

 

So yeah, that’s it for today. Any feedback you may have is welcome, as usual. And, as always, thanks for looking and stay tuned for more!

Advertisements

The State of the Hunt, Week 33/2018: The Ordos are recruiting…

Posted in 40k, Conversions, Inq28, Inquisitor, Pointless ramblings, state of the hunt, WIP, World Eaters with tags , , , , , , , , , , , , , , on August 16, 2018 by krautscientist

Hey everyone, I am pretty busy at the moment, but I do have some new models for you to look at — just a couple of INQ28 kitbashes for today, however — that will have to suffice πŸ˜‰ So what is this about?

The first pair of models I want to share with you has actually been around for a while, but I don’t think I have posted them over here yet: Last year, fellow hobbyist BubblesMcBub was amazingly generous enough to let me have most of the Death Guard models from the Dark Imperium boxed set, and as a way of paying him back for that great kindness, I promised to convert some models for him. I already sent him a converted Iron Warriors champ late last year…

…but Bubbles also wanted meΒ  to build him an Ordo Xenos Inquisitor.

Now it did take me a while to do this, both because I wanted to come up with something cool, but also because I couldn’t quite decide which general approach I wanted to go with: A massive, towering monodominant Inquisitor of the “Suffer Not The Alien To Live!” school of thought? Or a rather more subtle, sneaky and shadowy Inquisitor who is not above using the odd Xenos artifact himself? Both are pretty cool angles, and I realised in the end that the only right way was to actually build both πŸ˜‰

So here are the Inquisitors I converted for Bubbles:

 

First up, the hulking monodominant Inquisitor:

Now this guy is actually a refurbished model of sorts: He began his existence as a champion for my old, kitbashed Legio Custodes army, but with official Custodes models now available, he wasn’t likely to be used for his intended role anytime soon. I rather liked the kitbash, however, which is why I made some changes to him (adding a different sidearm, backpack and shoulder pad) to make him look even less Space Marine-y. And I think that, after a final round of minor cleanups, he should work as a fine puritan Inquisitor for Bubbles’ collection.

The second guy, on the other hand, was built completely from the ground up, and represents the more subdued (and maybe ever so slightly radical) side of the Ordo Xenos. Take a look:

The Inquisitor uses a Genestealer Hybrid body, because I felt the retro-futuristic spaceman vibe of the suit fits the Ordo Xenos rather nicely (it is also heavily reminiscent of the kind of industrial design you see in the Alien films, which is another great match. I gave the Inquisitor an AdMech sword, because its very sleek, modernist look seemed like a good fit. And he’s also wielding a Harlequin’s kiss, to show how he’s definitely not above making use of Xenos artifacts.

I also have to admit that I may have taken a teeny tiny bit of inspiration from DexterKong’s excellent Inquisitor Falx, one of my favourite models of his.

So these two guy will soon be a part of BubblesMcBub’s part of the 40k galaxy, and I hope he likes them — once I finally manage to send them off to him, at long last, that is. Sorry, mate! I know I’m terrible! πŸ™‚

 

So, with those two guys finally documented over here on the blog, I also have a current kitbash to share with you. Now you may remember my kitbash for Inquisitrix Elianu, of the Ordo Malleus, from recently:

The Inquisitrix was based on the Easy To Build Stormcast Sequitors — in fact, I only really bought that kit to get my hands on this one model. But I still had those other Sequitors, so I thought it was time for another INQ28 conversion based on the kit. So I made a Crusader for Inquisitrix Elianu’s retinue:



As you can see, it’s a rather simple conversion from a structural standpoint, although it did require some detail work when it came to picking out the right bitz to take the model into the 41st millennium — and to replace some of the more overtly AoS inconography.

One bit that I really think makes the conversion is the head, a leftover head from the Datasmith that comes with the Kastelan Robots. Nothing says 40k like a face full of cables, isn’t that right? πŸ˜‰

I also went through several weapon variants and surprised myself by using the Custodes sword blade in the end — I actually really don’t like those clunky swords when they are used as swords, but as some kind of weird tech-spear-glaive thing, it really works rather well with the Crusader feel, wouldn’t you agree? Prompted by fellow hobbyist Naryn, I even included a small trigger mechanism close to the model’s right hand, to show how the integrated boltgun might be fired.

One thing I did think long and hard about was whether or not to replace the model’s shoulder pads with something a bit less Stormcast Eternal-ish, but the pauldrons seemed like such an integral part of the lines that define the model that I decided to leave them like that, as everything I would have come up with wouldn’t have looked better in the end.

All things considered, I am also rather fond of him right now, to be honest — I think it has something to do with the fact that I only really purchased the box for the female Sequitor, and the other two models were basically chaff. To see one of them transformed into something useful and cool does feel pretty cool! πŸ™‚

 

Here he is, along with his mistress, Inquisitrix Elianu:

So that’s it for today! Please feel free to let me know what you think! And, as always, thanks for looking and stay tuned for more! πŸ™‚

The State of the Hunt, Week 29/2018: Hot weather and heavy armour

Posted in 40k, Blood Bowl, Conversions, Inq28, Inquisitor, Orcs & Goblins, state of the hunt, Totally worth it, WIP with tags , , , , , , , , , , , , , , , , , , , , , , on July 16, 2018 by krautscientist

A bit of a transitional post for today, as I don’t have any completed models to share with you at the moment — that’s what I get for touting my own productivity in my previous post, I suppose πŸ˜‰

But anyway, both the warm weather and various other distractions have kept me from painting anything lately. That doesn’t mean I haven’t been doing any hobby-related work, though: At least I have some WIP impressions to share with you! πŸ™‚

I. The Long Watch:

So far, my Primaris-based true scale Deathwatch killteam numbers four completed members, as you will probably remember:

Thanks to several bitz drops, I have been able to start work on the next two members of the team. First up, I wanted to include a Watch-Brother from the Castigators, a fourteenth founding Ultramarines successor, and Commissar Molotov’s own DIY chapter — given Mol’s role as the doyen of the INQ28 movement, I felt this would be a nice little shout out to him πŸ˜‰

So far, my Deathwatch conversions have been an attempt to convey the character of the Marines’ respective chapters through the actual conversion, and I did have a rather nifty idea for the Castigator, if I do say so myself: Seeing how the chapter icon prominently features a hand holding a whip, and given the fact that the Deathwatch seem to be all about crazy weapons nowadays, I thought it would be cool to get a little creative with the model’s equipment πŸ˜‰

Take a look:

The model is based on one of the Primaris Lieutenants from the Dark Imperium boxed set that I was able to snap up on ebay — the pose was quite perfect for what I had in mind, and it was really easy to replace the model’s power sword with the whip from the Necromunda Escher sprue — it’s a good thing we actually get two of those whips in the Necromunda boxed set πŸ˜‰

I wasn’t quite sure at first whether or not the whip look would work, but I do think the Marine wears it rather well: The bigger scale makes the weapon look a bit more plausible, and the model’s dynamic stance definitely matches the weapon.

Apart from the weapon swap, I only really added a bit of additional gear to the model’s belt and swapped in a Deathwatch backpack and shoulder pad (replacing the stock shoulder pad did take a bit of careful sawing, though, as the pauldron and arm were one bit). I also really wanted to have one member of the squad wear an Mk. VII helmet, for that classic mid-to-late 90s Space Marine look, and I still had a vintage metal Deathwatch head in my bitzbox, so that seemed like the perfect option to go with.

Commissar Molotov also kindly offered to send over a custom Castigators shoulder pad, although I am pretty much committed to freehanding the chapter icon onto the right pauldron — how much harder than an actual lion head can it possibly be, right? Plus it would save me the hassle of having to saw through another Space Marine arm πŸ˜‰ I would really like Molotov to name this fellow, though!

That’s not all, though: Thanks to a supply drop from fellow hobbyist Augustus b’Raass, I received yet another Primaris Marine, which allowed me to start yet another Watch-Brother, a Lamenter this time around. It felt like my kill team still needed someone with a massive gun, so I decided that the role would fall to the Lamenter. After doing a bit of research on the matter, I bought the model for Rodricus Grytt (from Kill Team Cassius), because it would give me both the weapon, backpack and Deathwatch shoulder pad I needed in one go.

So the biggest part of the conversion was to make Rodricus’ arms fit the Primaris body — something that actually turned out to be surprisingly easy, with just a bit of tweaking:


I did have to carefully cut off the right upper arm from both the “donor” model and the Primaris Marine, though, in order to make it all work together — I only really had to do this because I wanted to be able to replace the stock Primaris shoulder pad, however.

Regarding the details, I chose some bitz with teardrop symbols to match the Lamenters’ inconography. As for the helmet, I have a funny story to go with that one: Having tried, half a dozen times, and unsuccessfully, no less, to sell Commissar Molotov on this particular helmet for his true scale Lamenters Watch-Brother, I realised that the only way I was going to ever see this helmet used in that capacity was to build my own Lamenter — so here we are πŸ˜‰

In order to add to the bulky look created by the helmet and massive weapon, I also added some additional armour plates to the model’s hip, although they are not all that visible in the above picture — trust me, though: They are there πŸ˜‰

As for the pose, I would have preferred something a little more grounded and stable, but I only had the one Primaris Marine to work with, so I did the best I could. Given his pose, the Marine obviously isn’t in the process of firing his weapon, but rather seems to be lugging it from point a to point b. So what do you guys think: Does he work better looking straight ahead like this:

Or looking off to the side, like this:



I also tried having him look towards the barrel of his gun, but the model ended up looking very unbalanced that way, plus it would also obscure a lot of the detail on the faceplate. Anyway, would love to hear your feedback on this!

In any case, many thanks to Augustus b’Raass, of course, for sending over the model for the conversion! Cheers, buddy! πŸ™‚

 

II. Golden Girl

Ever since the recent release of Age of Sigmar’s 2nd edition’s starter box and the accompanying models, everyone and their mother have been going crazy over the new Nighthaunt models (and some hobbyists, like the ever-inspirational Jeff Vader, are already having a field day with the, admittedly very nice, skeleton-ghost thingies).

However, nobody’s been talking about what must be the entire release’s single coolest model: The female Stormcast Eternal coming with the Easy To Build Easy To Build Stormcast Sequitors:

Seriously, I love this model! It’s almost perfect, really: The pose, the very cool face, the clean lines. I don’t care much for the weird mace head, but that’s Stormcast Eternal weapon design for you. Anyway, I knew right off the bat that I wanted to turn this lady into an Inquisitrix — my first Inquisitrix, actually, something I have wanted to do for a long time, ever since seeing PDH’s brilliant take on Naeve Blacktalon.

So here’s what I have so far:

 

Like I said, I really love this model, which is why I have decided to keep the conversion fairly subtle for now: I merely replaced that weird He-Man-style weapon with something a little more 40k (a thunder hammer from the plastic Mk. III Marines with an eagle head from the Imperial Knight Questor) added a holstered pistol at the hip and an Inquisitorial rosette and replaced the design on the shield with an Ordo Malleus-style heraldic device (quite a bit of work, that last one):

I am actually a bit reluctant to add too many more gubbins to her: Much of the model’s coolness comes from its very clean lines, mostly created by juxtaposition of the static pose and the flowing robes, and I don’t want to ruin that by overcluttering her. A bit of extra gear on her belt, maybe, but don’t expect me to go crazy on the grimdark bitz. In the end, I am pretty confident she’ll look perfectly at home in the middle of an Inquisitorial warband.

If there is one problem with the model, it’s that this girl is tall — almost freakishly so, and even moreso when using the elevated base the model actually came with — a veritable plinth, that one. She is just as tall as a Primaris Marine, and that’s not counting the base.

So the first thing I did was to drop the base and go with something a bit less vertical — the very cool readymade base that came with the Primaris Marine Augustus send me seems like an excellent standin for now. As for her actual height, I guess I’ll be able to get away with it because she’s an Inquisitrix: The Inquisition definitely has the kind of crazy tech at its disposal that could allow for all kinds of body augmentation. It would arguably be more of a problem if I wanted to turn her into, say, a Sister of Battle, for instance.

 

III. This is going to sting a little…

There’s also another addition to my Blood Bowl team, as my friend Annie gave me a very cool model for my birthday. This delightful little Kromlech goblin nurse, who will be the Orkheim Ultraz’ medic from now on:

Expect to see this little guy painted sooner rather than later! And a heartfelt thank you to Annie for – another – lovely contribution to my team! πŸ™‚

 

IV. In closing…

Before I wind up this post, I want to elaborate about one of the aforementioned distractions that have kept me from painting. Some long time readers may remember that I am a bit of a video game fiend, so it’s probably not too surprising to learn that one thing keeping me from painting at the moment is…a video game:

I have been slightly addicted to playing Hollow Knight for the last couple of days, and I only really bring this up because I am fairly confident that quite a few readers of this blog might enjoy the game just as much as I do: It’s a 2017 indie action adventure that has been receiving quite a bit of hype recently, after being released for the Nintendo Switch. I bought the PC version last weekend and have been unable to tear myself away from it ever since. For those of you a bit familiar with videogames, it’s as though Dark Souls had been reimagined as a sidescrolling Metroidvania…with bugs (the animals, mind you, not the technical gaffes). It’s highly addictive, incredibly atmospheric, and also very cute and very creepy at the same time. If that sounds like it might be your thing, check out the game here.

 

So yeah, that’s it for today! Let’s hope I’ll be able to get something finished again before long — I’ll definitely keep you guys posted! πŸ˜‰

Until then, please feel free to let me know what you think about these WIPs! And, as always, thanks for looking and stay tuned for more!

Inquisitor 28: Kitbashing spree pt. 1 – With Fire and Sword

Posted in 40k, Conversions, Inq28, Inquisitor, Uncategorized with tags , , , , , , , , , , , , , on May 14, 2014 by krautscientist

Ever since I’ve managed to complete my World Eaters Lord on juggernaut, I have been in the clutches of a veritable, INQ28 related kitbashing spree, building model after model — let’s just hope I’ll manage to get some of these painted at some point! πŸ˜‰

Anyway, over the next couple of posts, I would like to show you the models I have come up with during this pleasant burst of inspiration. As usual, many of these have been hammered into completion through the very helpful feedback of fellow hobbyists on the forums I frequent, so a heartfelt thank you to anyone who helped me sorting out the smaller kinks on these pieces.

Anyway, for today, let’s forego the shadowy side of the Inquisitor universe in favour of some more ostentatious servants of the Emperor:

 

I. A pair of colleagues

Ordo Hereticus Inquisitor WIP (15)
One thing I did was to touch up a pair of Inquisitors that I had already built a rather long time ago. Upon closer inspection, it seems I have never shared them here on the blog, so that alone should be enough reason to talk about them πŸ˜‰ So let’s take a closer look:

The first of the two was built to be instantly recognisable as a psyker: By choosing bitz of psionic equipment like a warding staff and psychic hood and by trying to look him tall and gaunt, I believe succeeded at communicating that idea. Take a look:

Ordo Hereticus Inquisitor WIP (5)
Ordo Hereticus Inquisitor WIP (6)
Ordo Hereticus Inquisitor WIP (7)
As you can see, the kitbash itself is fairly straightforward, with an upper body mostly made from GK plastic parts combined with the robed legs of the WFB Chaos Sorcerer. But while I had originally used GK shoulder pads on this guy, PDH rightly pointed out that those made him look a tad too much like an Astartes, so I replaced them with some Chaos Marauder shoulder pads for a less “Marine-y” look. This also had the coincidental side effect of making the model look quite a bit like a piece of artwork in the Inquisitor rulebook, but this wasn’t planned.

In order to further obscure the GK origins, I improvised a nonstandard “power plant” for the model’s back, combining the lower half of a GK backpack with some tanks from a Vraksian Renegade Militia soldier:

Ordo Hereticus Inquisitor WIP (9)
The other Inquisitor was designed to be pretty much the polar opposite of the psyker: I wanted a bulky, ostentatious, very physical type, inspired by characters like Witch Hunter Tyrus or Inquisitor Coteaz:

Ordo Hereticus Inquisitor WIP (10)
Ordo Hereticus Inquisitor WIP (11)
Ordo Hereticus Inquisitor WIP (12)
Again, a couple of Marine and GK bitz are very much at the centre of this conversion. So I tried once more to prevent the model from looking too much like an Astartes by combining the Marine bitz with stuff from different sources: The legs came from the WFB chaos warriors, and I added a couple of additional armour plates (the shoulder pad based on a radar array was inspired by a similar conversion in the old Codex Witch Hunters, by the way). And I added a half cape over the model’s shoulder, making use of possibly the last part I had left over from the Chaos Lord on Manticore rider bitz πŸ˜‰

Ordo Hereticus Inquisitor WIP (13)
All in all, this guy is a real beefcake, but back then, it was a lot of fun to build an Inquisitor who wasn’t a gaunt, shadowy figure for once.

While I have not yet decided which Ordo these two will belong to (I suppose it’ll be a neck and neck between Malleus and Hereticus), I definitely think they have some chemistry together: There’s certainly a bit of a “brains and brawn” thing going on, don’t you think?

Maybe, these two work together as a team, hunting down rogue Inquisitors and Heretics. It might also beΒ  interesting to have them be far more divided than is apparent at first glance: Maybe the bombastic, monodominant Witch Hunter secretly detests his colleague for his reliance on the powers of the warp? Maybe the Psyker has discovered he has a taste for the more radical rituals and pratices? Maybe they are the estranged former pupils of a common master, now brought back into an uneasy alliance by circumstances beyond their control? In any case, there could be some delicious friction between the two…

 

II. A Sister of Battle

The next model I want to show you today came together surprisingly quickly and was a ton of fun to convert. But I am getting ahead of myself! Let me start by telling you that I have a huge soft spot for the Adepta Sororitas and think it’s a crying shame that GW have shown them so little attention over the last years. For me, the Sisters of Battle are one of the most eclectic and quirky elements of 40k, and one of the things that really sells the setting as something different and interesting. The Sisters are iconic and recognisable and – rather surprisingly, both for GW and wargaming in general – not a highly sexualised depiction of female characters (let’s just forget the Sisters Repentia for now, because they clearly aren’t all that sexy, unless you are that way inclined…). Maybe that’s why the Sisters aren’t selling enough models to warrant a substantial new release?

Anyway, long story short, I have wanted to build a Sister of Battle for my INQ28 collection for quite a while now, and after having converted a small squad of Sisters of Silence for my Custodes, I was reasonably confident that it could be done, and could be done in plastic, no less. So a short time ago, I picked up a leftover Dark Eldar Kabalite Warrior and a couple of bitz and built this model:

Sister Kitbash (5)
Sister Kitbash (7)
Sister Kitbash (8)
I am really happy with the model, to tell you the truth, even though I clearly recognise that it’s not without its faults: For the head, I had to fall back on the one plastic Sororita head available (from the Sisters of Battle vehicle conversion kit, I believe), resulting in a head that might be ever so slightly too big for the body. The backpack may be a bit too bulky as well, although I am actually rather proud of the actual build for that part.

All in all, even though it may be a slightly flawed model, I am enormously fond of it, if only because it was entirely built from plastic parts, without any actual sculpting involved. And I hope that a classic Sisters of Battle paintjob will go the rest of the way towards selling the model.

Sister Kitbash (6)

III. An Angel of Death

And, last but definitely not least, let me show you my latest conversion (and a model I am immensely proud of):

I imagine most of you will have heard about a certain trend of “truescaling” or “art scaling” Space Marines. Not to delve too deeply into this discussion, but the main argument behind this movement is that the scale of the actual Space Marine models doesn’t fit the depiction of Marines in the art and written background published by GW: While the Marines in the art and fluff come across as veritable titans, much taller and wider than any mere man, an actual Marine on the table will often literally see eye to eye with any Cadian or Chaos Cultist.

So quite a few hobbyists are going the “true scale” route, converting and/or resculpting their Marines to be closer to the depictions in the background. And while I am perfectly happy with the scale of Marine models in my regular 40k army (for practicality reasons, if for nothing else), the wonderful world of Inquisitor provided the perfect excuse for building at least one true scale Astartes.

You see, one of the things the original 54mm Inquisitor models truly excelled at was to communicate the fact that people come in all shapes and sizes: While most infantry models for 40k will usually be scaled to equal size, the 54mm Inquisitor models represented a wide range of heights and builds — and Brother Artemis, the Space Marine model released for Inquisitor, was definitely the tallest and most imposing guy in the catalogue.

And with the focus on making individual models look as good as possible in INQ28, I think we should also try to incorporate that variety in heigth and build into the smaller scale, even though it means more work. And while there’s admittedly not that much use for a Space Marine in INQ28, I still wanted to build one, both due to the challenge involved and because such a character would fit into the background for my little slice of the galaxy.

Now actually building the model turned out to be a veritable odyssey: Everything started when I saw Commissar Molotov’s Deathwatch Marine many moons ago:

Deathwatch Astartes by Commissar Molotov

Deathwatch Marine converted by Commissar Molotov and painted by ElDiablo

Molotov himself may no longer be all that fond of this model, but ut really served as a trailblazer for me in that it convinced me that building and painting a truescale Marine would be a very worth hobby endeavour! And indeed, I started kitbashing right away (back in 2011), coming up with this:

Truescale early WIP 01
But while it may have been a valiant first effort, the model didn’t convince me, even back then: The proportions were a bit off, the legs were clearly Terminator legs, and I feared I would have to get my feet wet using GS to sort out the build of the model. So this first test model was scrapped, and I put the project on the back burner, there to simmer for a while…

And simmer it did: Whenever I saw my fellow hobbyists come up with amazing truescale Marines of their own, their work would prove to be both inspiring and intimidating to me: Inspiring because it gave me the motivation to take another shot at my own model, intimidating because all those models always seemed so much cooler than what I could come up with.

There are many, many cool truescale projects out there, so naming favourites seems a bit unfair, but let me at least mention the models that proved the most inspiring (and/or intimidating) to me: Jeff Vader came up with a wonderful series of truescale Marines, but I couldn’t get his recipe to work for me, much as I tried. The Strike Force Helmawr project proved tantalising, showing not one but many, many true scale models (and convincing me I could never pull it off). Bruticus’s amazing Sun Titan Space Marine made me salivate at the mouth and gnash my teeth at the same time, because the model and backstory were fairly close to what I had been planning for my own model (on a related note, the model is made even better by the wonderfully grimdark background provided here and here). And there was always migsula with his outstanding Alpha Legionaries, of course, but I knew right away that I myself could not hope to aspire to something as lofty as that πŸ˜‰

Meanwhile, I made another attempt at building my own truescale Marine:

Truescale early WIP 02
But while the model did feel like an improvement over the first version, the look I wanted still wasn’t there. Would I be forever unable to come up with a suitable Astartes for my INQ28 collection?

What finally pushed me over the edge to try it yet again were Jeff Vader’s Deathwatch Marine (using a GK Terminator torso instead of that of a regular Marine, something I hadn’t even considered before) and Ukos’s really nice and clean truescale model (also using plastic Terminator parts). So, last weekend, I gave it yet another try, and this time I persevered:

Brother_Sergeant_Auriga
In hindsight, it’s truly baffling how quickly the model’s body came together after all that prior deliberation. The main challenge was to get the proportions to look plausible enough, but I think I have finally managed to make it work! As for the parts used, the legs came from a FW Tartaros Terminator (I’d probably always recommend these over regular Terminator legs, because their design means that they won’t need any additional greenstuffing to look accurate), while the torso and arms are from the Grey Knight piloting the Nemesis Dreadknight. I also added shoulder pads from the Sternguard kit and a particularly arrogant looking head from the Vanguard kit. Oh, and the cap of a felt pen provided the plasticard collar I needed to make the armour work — another good piece of advice for lazy people like me πŸ˜‰

After the main build had been sorted out, it came to making the armour look less utilitarian and more ostentatious and baroque. I quickly found out that I couldn’t add nearly as much bitz and bobs as I would have liked, and I really had to reign myself in so as not too overclutter the model’s silhouette! Anyway, here’s the model with added gear and decoration:

Brother_Sergeant_Auriga04
In addition to providing a bit of extra bling, some pouches and grenades were used to bulk out the hips and help create the illusion of “correct” proportions.

The final step was to add weapons to the model, and I clearly knew I wanted this guy to be wielding a sword and a pistol of some sort. And while I had several options for either, in the end it turned out that many of the possible weapons weren’t useable because they would have looked like mere toys in the hands of this huge model — a very real complication with truescale models!

In the end I settled on a FW plasma pistol and a Grey Knight power sword. And with that, the conversion was completed. I give you Brother Sergeant Janus Auriga, of the Golden Legion Astartes Chapter:

Brother Sergeant Auriga (7)
Brother Sergeant Auriga (6)
Brother Sergeant Auriga (5)
Brother Sergeant Auriga (4)
Brother Sergeant Auriga (3)
Brother Sergeant Auriga (2)
And, of course, no post about a true scale Marine would be complete with a scale comparison shot showing the model next to one of its “regular” counterparts. Take a look:

Brother Sergeant Auriga (8)
Quite a beast, don’t you think? πŸ™‚

I won’t lied to you: I am super happy with the finished model, especially since it has taken me such a long time to come up with a true scale Astartes of my own! Since I don’t plan on building any more TS Marines, I knew that I should give it my all on this guy — and I did πŸ˜‰

Brother Sergeant Auriga (1)

So yeah, those are the first results of my recent INQ28 kitbashing spree. As usual, I would love to hear any feedback, suggestions or criticism you might have! And, as always, thanks for looking and stay tuned for more!