Archive for lord commander

Inquisitor 28: From Cataphractii to Chapter Master

Posted in 40k, Conversions, Inq28, Inquisitor, WIP with tags , , , , , , , , , , , , , , , , , , on May 12, 2016 by krautscientist

Hey everyone, after speaking – at length – about my conversions using the Cataphractii Terminators from Betrayal at Calth and about my experiences converting that Cataphractii Praetor from the same boxed set into yet another 30k version of Lord Captain Lorimar, let’s return to the wonderful world of Cataphractii once more and discuss another conversion. The base for today’s project was, once again, the Betrayal at Calth Cataphractii Praetor:

Betrayal at Calth release (17)
Messing around with the model had already taught me that it didn’t take much to really transform the stock version of the Praetor into something else — but I wasn’t quite finished with the model yet, because I had to remember Commissar Molotov’s very interesting proof of concept for a true scale Astartes based on the Cataphractii Praetor. And after learning for myself how relatively easy it was to get rid of the model’s pidgeon-toed stance, I couldn’t get this idea out of my head. And when I recently had the chance of picking up another Praetor for cheap from fellow hobbyist Mineralwasser, that basically settled the deal. And what better way to convert this model again than to make it into the Chapter Master of my DIY Chapter, the Golden Legion?

I started by creating a very simple first mockup:

Second Golden Legionnaire early WIP (1)
The main objective here was to get a basic feel for what I wanted the model to look like. As you can see, I made the exact same adjustment to the legs I used on my Lorimar conversion earlier. Beyond that, a couple of things were pretty easy to decide, even at this early point: I really, really wanted to use that fantastic, bearded head from the Sternguard kit (possibly one of the best Space Marine heads ever), and some ostentatious shoulder pads from the same kit would be used for the Chapter Master’s pauldrons.

Regarding the overall look of the armour, I think the Cataphractii Praetor is a really promising base model for a true scale conversion, as the armour could easily pass for an older mark of regular power armour or some kind of artifcer armour. Possibly the best part is that the layered armour on the arms and legs believably looks like enforced standard power armour — unlike plastic 40k Terminator parts that will always look like Terminator armour, unless you are prepared to invest quite a bit of work.

Anyway, here’s a comparison picture with the early mockup version and my previous Golden Legion Astartes, Praetor Janus Auriga:

Second Golden Legionnaire early WIP (2)

The next step was to nail down the pose I wanted as well as the overall feel of the model, in order to decide on the additional bits I would need . For instance, the Praetor’s stock arm with the combi-bolter worked reasonably well, but it wasn’t what I had in mind for the Golden Legion. In my background notes, swordplay is a huge part of the Legion’s culture and mythology, so it goes without saying that the Chapter Master would need an especially ostentatious sword. However, as the following picture shows, using the stock arm and weapon would work really well for an Astartes with a slightly more standard set of equipment!

Second Golden Legionnaire early WIP (3)
For the left forearm, I decided to use an arm from the Stormcast Eternals models from the Age of Sigmar starter box: I already knew at this point that I wouldn’t be keeping the hammer, but the vambrace has a very nice lion design on one side, plus it really worked well scale-wise for a true scale Astartes.

But yeah, I wanted a sword, so I browsed through GW’s entire catalogue until I came upon a bit that I thought might do the trick — I even made a crude Photoshop mockup of the whole shebang at this point 😉

Second Golden Legionnaire early WIP (5)
So I ordered that sword from the Deathwing command squad, along with a small collection of additional bitz — we’ll get to the result in a second. Before that, however, here’s a look at the model’s back, warts and all, to show you the construction I used:

Second Golden Legionnaire WIP (5)
The model’s back is basically a shaved down GK Terminator torso back, which fit surprisingly well with a bit of shaving here and there. What’s more, the shaved-down back vents really make for an excellent point of attachment for a standard Space Marine backpack without any further work — I used the same approach on my first true scale Marine, incidentally.

One thing you will also have noticed in the picture above is that I did try to add a stylised deathmask to the model’s right pauldron. The idea was that this is the Deathmask of St. Sabasto, the Velsen Sector’s patron saint, so to speak, and that the Golden Legion is using it almost like a chapter badge. I felt mighty smart when I press-molded a Sanguinary Guard mask with GS, because I thought a GS duplicate would ultimately conform to the shoulder pad’s curvature far better — but unfortunately it ended up looking pretty hokey! I did find a very simple solution for this problem, though.

So here’s a look at a far more complete version of the Chapter Master:

Golden Legion Chapter Master WIP (1)
As you can see, the Deathwing sword works really well with the stock arm, even though it turned out to be even longer than I had anticipated. I also added a cape from the same Deathwing kit, because, let’s face it, Chapter Masters just need to look suitably ostentatious 😉

As for the mask on the shoulder pad, the solution turned out to be almost disappointingly simple: I simply grafted an original plastic Sanguinary Guard faceplate to the shoulder pad, and it worked much better than the GS copy I had on there earlier (even though it made me feel a bit stupid for even trying the long way around, so to speak):

Golden Legion Chapter Master WIP (3)
Golden Legion Chapter Master WIP (2)
As I have mentioned earlier, the idea behind the deathmask is that it’s the stylised face of the Imperial Martyr Sabasto, patron saint of the Velsen Sector. The Golden Legion were his personal guard of honour when he defended  the sector against an incursion by the forces of the Arch-Enemy about 1,500 years ago, and his ultimate demise at the very forefront of the Crusade remains a mark of shame to the chapter, and a reason for their fanatical need to protect the Velsen Sector against any enemies from without.

At this point, most of the conversion was basically finished:

Golden Legion Chapter Master WIP (4)
All that was left to figure out was what to do with the left hand: I considered – and ultimately discared – many different weapon and equipment options, because they all ended up feeling a bit too pedestrian to me. But then again, leaving the hand completely empty also seemed like a bit of a missed opportunity.

Fortunately, JaggedToothGrin came up with the excellent idea of having the model hold some kind of rosary or amulet, and EdT suggested using the left hand of this Age of Sigmar Paladin Retributor:

Paladin Retributor Champion

I instantly liked this idea, but I didn’t know how easy it would be to source the required bit — but it soon became obvious that I wouldn’t even have to find that particular hand, because I discovered yet another suitable part on the Sternguard sprue.

So here’s Orestes Prabian, Lord Commander of the Golden Legion, finished except for maybe a bit or two 😉

Golden Legion Chapter Master WIP (10)
The small chain with a Crux Terminatus dangling from it was originally part of a Sternguard torso, but it seemed like a natural fit, so I carefully snipped it off and grafted it to an empty fist from the same source, and I am really happy with the result:

 

Golden Legion Chapter Master WIP (12)

Golden Legion Chapter Master WIP (14)

The area where the backpack meets the cape will require some minor cleanup, but that shouldn’t be too much of a problem. After that, it’ll mostly be a case of carefully adding a bit more bling to the model here and there 😉

Golden Legion Chapter Master WIP (13)

I think the finished conversion is suitably iconic to work as a Chapter Master — and, maybe even more importantly, it also believably works as a true scale Astartes! Here’s another comparison picture with Janus Auriga:

Prabian & Auriga comparison picture
Granted, upon closer examination, Janus may be ever so slightly taller than his Chapter Master — a result of my cobbling together a recipe while I was going on the first model, whereas the second Astartes was mostly based on a rock solid base model. In the end, I didn’t want to mess up the Chapter Master’s proportions by awkwardly splicing in any spacers, though — and who knows, maybe Janus is just a big guy, even for an Astartes?

Here’s another picture, showing both the Chapter Master and my 30k Lorimar version — both of them are obviously based on the same plastic Cataphractii Praetor:

Prabian & Lorimar comparison picture
While I wasn’t completely sold on the stock model for a while, it has really grown on me, due to its surprising versatility. And it does make for a pretty much perfect base for a true scale conversion, if you ask me!

And with that, we can mostly consider the Cataphractii case closed — expect to see more of these guys once I get some paint on them 😉

Until then, as always, thanks for looking and stay tuned for more!

Golden Legion Chapter Master WIP (11)

Advertisements