Archive for heresy

Khârn of the Eighth

Posted in 30k, Conversions, paintjob, World Eaters with tags , , , , , , , , , , , on May 1, 2017 by krautscientist

“The first warrior’s ceramite armour plating was cast in the same white as clean marble, from churches that should never have been built. The suit’s reinforced edges were the same blue as a winter sky back in the impious age of Old Terra, before humanity burned the world’s surface and drank the natural oceans dry. His skin was as pale as any consumptive, a legacy of the pain machine inside his skull. It pulsed even now, teasingly erratic, sending fire tick-tocking through the meat of his mind.

The helm he carried under his arm was a slant-eyed, snarling thing of red eye lenses and a Sarum-pattern mouth grille. An officer’s crest of white horsehair rose, sharkfin-like, to mark him out from his men in the heat of battle. The etching on his shoulder guard, written in the mongrel tongue called Nagrakali, named him as Khârn of the Eighth.”

Aaron Dembski-Bowden, Betrayer

Welcome to another World Eaters-related update — I almost feel like I should apologise for the somewhat monothematic nature of recent posts, but then I am simply on a bit of a roll with this latest project of mine, and I know better than to second-guess inspiration when it strikes… 😉

So you probably remember my conversion of Khârn here, created fairly recently:

Now earlier this week, fellow hobbyist Aasfresser talked me into joining a small painting event at one large German hobby forum and suggested I enter my interpretation of 30k Khârn. I let myself get roped into it — which was all for the best, ultimately, but we’ll be getting there in a minute.

Before I could start painting the model, however, there was one last additional touch I wanted to include: Seeing how Forgeworld’s official model comes with options for both a helmeted and bare head, I just wanted to include the same variants on my own conversion as well. Now the bare head was already taken care of, which left me with having to come up with a suitable helmet.

ADB’s description of Khârn’s helmet (as quoted above) calls it “a slant-eyed, snarling thing of red eye lenses and a Sarum-pattern mouth grille.” And the accompanying piece of BL artwork came up with a version that is fairly close to the model’s actual design:

I knew I wanted something very slightly different, however, because I couldn’t shake the feeling that the one helmet design perfectly matching the description above…were the helmets that come with Forgeworld’s 40k World Eaters conversion set.

And it makes a lot of sense, too — wouldn’t those 40k World Eaters still be wearing the corrupted versions of their original Sarum-pattern helmets? Plus there was also the fact that I had seen Mr. Poom put the same approach to excellent use on his own, spectacular World Eaters.

So I very carefully shaved the Khornate crest off a World Eaters helmet and used it as a template for my first Sarum-pattern helmet:

And I was reasonably happy with the result — I would definitely be able to create a suitable helmet for Khârn this way, of course with an added officer’s crest!

The other thing to take care of was the model’s base. Now I quickly realised that a character of Khârn’s stature warranted a bigger base, so I upgraded him to a Terminator-sized base right away. When it came to the base’s actual design, I wanted it to contain visual shout outs to Angron’s base, creating an even closer link between the two models, which only seemed fitting. So I tried to repeat several elements that appear on Forgeworld’s base for Angron: torn metal beams, diamon patterned metal plates and rocks, stuff like that. At the same time, I also tried to make it fit the design of my other World Eaters, using the same general texture:

With those preparations out of the way, the time for painting had come. And in spite of the tight deadline – or maybe because of it – the model almost came together by itself, surprisingly enough. Seriously, I had a blast with this guy!

So here’s everyone’s favourite, bloodthirsty madman in his younger years:


“The Bloody”, Eighth Captain,
Equerry to the Primarch Angron,
XII Legion Astartes


It was absolutely clear, of course, that I would have to include some kind of blood effect, but I also didn’t want to overdo it — which is why I chose to focus the blood on the left leg, where it would probably end up when gore keeps flying from the teeth of Khârn’s axe.

I also have to admit that I actually really love the helmeted version — which is a strange development, seeing how the bare head was what inspired the whole conversion in the first place, but then that’s creativity for you… In all fairness, however, it also feels quite appropriate to have a helmeted version when the original, classic 40k Khârn is defined so much by his helmet.

Regarding the model’s base, like I said, it now serves as a “missing link” between Angron’s base and the bases of my remaining World Eaters:

In an interesting twist, fellow hobbyist Soric pointed out over at The Bolter & Chainsword that there’s a matching piece of broken aquila in the same basing set that would just be idea to base an Argel Tal conversion — a rather interesting and tempting thought, really… 😉

Oh, and here’s a closer look at the bareheaded version of the character:

It’s mentioned several times in Betrayer how the pain of the Butcher’s Nails is a constant companion to Khârn, yet in contrast to many of his brothers, he actually tries to fight their influence and stay levelheaded more often than not, so I thought it would be nice to give his face a drawn, haunted quality. And I do think both head options really have merit, which is why I’ll leave the head interchangeable.

And, of course, Father and Son:

Wha…? Are they wielding the exact same axe at the same time? TIME PARADOX! 😉

What I really like is how the model really kinda looks like an “end boss” next to one of my regular World Eaters. Even the – rather vertically posed – Secutor Hamund is a bit shorter than Khârn:

When all is said and done, my objective was to create a model that draws enough visual cues from different sources to really read as Khârn. And when it comes to the 40k versions of the character, I think my model could reasonably grow into the classic Khârn over the next 10,000 years — but also into the new (plastic) version:

And I would argue he even takes enough cues from Forgeworld’s version of Khârn to clearly read as the character from that angle as well — and not just as any old World Eaters Centurion.

So I am really rather happy with the finished model — thanks must go to Aasfresser for actually convincing me to get off my arse! Oh, and this should go without saying, but I would definitely love to hear your feedback on the model, so make sure to drop me a comment!

As always, thanks for looking and stay tuned for more!

More 30k World Eaters — and a recipe for bloodshed

Posted in Conversions, paintjob, WIP, World Eaters with tags , , , , , , , , , , , , , , , , , on January 26, 2016 by krautscientist

Having already teased some additional painted 30k World Eaters in my last post, I think it’s only proper to take a closer look at these models today. Some of you may remember that my first 30k test model ended up quite alright, but also that I didn’t find the process of painting white armour all that enjoyable.

Well, no more. Because I have actually manage to tweak my recipe for 30k World Eaters so as to be far less time consuming and nerve-wracking. Which made my second test model far more enjoyable to paint than the first one! So without further ado, here’s the model:

2nd 30k World Eater (1)
“To the prim and proper XIIIth or the bleeding heart XVIIIth, the thought of Astartes killing Astartes is anathema.
But we have been doing this for decades, night after night, in the cages and on the hot dust.
The only difference is that there is no longer any need to hold back.”

Legionary Sarn, Eigar Veteran Tactical squad, 4th assault company, XII Legion Astartes


2nd 30k World Eater (2)

2nd 30k World Eater (3)

2nd 30k World Eater (4)

2nd 30k World Eater (5)

2nd 30k World Eater (7)

Regarding the parts I chose for the model, I spliced in some CSM arms and a Khorne berzerker torso. While the finished model seems like a fairly standard marine at first glance, it retains a certain sense of brutality that works well for the World Eaters, I think. Using CSM arms on the Betrayal at Calth plastics also allows for slightly more interesting poses. And the spiked and barbed CSM weapons are an excellent fit for World Eaters weaponry, without looking too chaotic — in fact, maybe this is Sarum pattern equipment, provided by the Forgeworld of the same name that the World Eaters liberated during the latter stages of the Great Crusade…?

As for painting the model, the main change to my original recipe was to use GW Corax White spraypaint for the white undercoat instead of having to paint it all on by brush. This really cut down on the time it took me to complete the model, plus it also reduced the number of somewhat iffy areas that needed further touchups. What’s more, having an easier time with the basic paintjob gave me the liberty to experiment with some additional effects.

The first of those was the blood: It was clear of course that blood would have to enter the picture at some point, so I chose this model as a test piece for that as well, trying to create an effect that would subtly enhance the model without overpowering it. I actually used a tootbrush to flick small amounts of Tamiya Clear Red at the model, in order to create realistic patterns. Then I went back and added some more blood to select areas of the model, such as the chainblade and the knee. I think it’s fun to apply the blood in a very deliberate manner, rather than just slathering it on. That way, figuring out how the blood may actually have gotten there in the first place turns into an interesting bit of meta-narrative — did this guy knee his opponent in the face, for instance? 😉

I also added another decal to the right shoulder pad: A “XII” numeral (actually a cut-down XIII from the Betrayal at Calth decal sheet):

2nd 30k World Eater (8)

And I included the pauldron of a fallen Armaturan Evocatus on the model’s base, trampled underfoot during the battle, maybe?

2nd 30k World Eater (6)

All in all, I am really rather happy with the World Eaters recipe I have come up with! It’s fairly effective and pretty fast to pull off, especially if, like me, you don’t like having to paint multiple thin layers of a base colour but enjoy the aspects of weathering and adding “special effects” far more.

30k legion badge

In fact, allow me to share my recipe — maybe those of you thinking about a 30k World Eaters project of their own will find this helpful.
So here’s a step by step tutorial for the white armour:

What you will need:

  • GW Corax White spraypaint
  • a white of your choice (I use Vallejo Dead White, but GW Ceramite White will work just the same)
  • GW Lahmian Medium (!)
  • a black and brown wash of your choice. I use Army Painter Strong Tone and Dark Tone, respectively, but GW Agrax Earthshade and GW Nuln Oil should also do the job.
  • a suitable dark brown/dark grey/green-brown colour for the sponge weathering. I use the OOP GW Charadon Granite (which is wonderful). However, any very dark grey/black/dark brown should work similarly well.

Oh, and one more piece of advice: You’ll make your life quite a bit easier if you leave the backpack and shoulder pads off and paint them separately. In fact, I even use a different undercoat for them (Chaos Black for the pauldrons and Chaos Black followed by Leadbelcher for the backpack). You can also leave off the head in order to be able to get into all the little nooks and crannies. However, all the following steps apply to both the head and body of the model.

So here we go:

Step 1: Spraypaint the entire model using GW Corax White. You get to decide how white you want your model to be during this step. For a slightly grey-ish off white, use the spraypaint sparingly. For a cleaner white, use a thicker coat of paint (or multiple passes of spraying). Make sure not to lay the colour on too thickly, though. This is what your model will look like afterwards:

Pre Heresy World Eaters white tutorial (1)
Step 2: After everything has dried, check to see whether there are any areas that remain unpainted. If so, this is the moment to use some slightly diluted white to clean them up a bit. As soon as that is finished, you should give the entire model a drybrushing with the same white, in order to build up a bit of contrast on the raised parts of the armour. It goes without saying that this will be more effective if you went for a slightly thinner undercoat beforehand.

Step 3: Now’s the time to block in all the different colours that aren’t white, i.e. the metallics, skin, trophies, pieces of cloth, pouches etc. This recipe won’t focus on my colour choices for this part, although I might do a more detailed tutorial in the future. Anyway, this is what the model will look like after this step:

Pre Heresy World Eaters white tutorial (2)
If you think it looks pretty terrible, you’re absolutely right. Don’t fret, as that’ll change in a minute 😉

One important thing, though: This is also the moment where you apply all the decals you want to go onto the armour, as we’ll need to weather them along with the armour to make them look realistic. So if you want to use any of those red World Eaters decals from Forgeworld, apply them now! After they are well dry, add a coat of matt varnish on top to seal them , just for hood measure.
This is also the last opportunity to clean up the white: Any errors that you don’t correct now will have to be covered up by the weathering later, so take another look at the areas that might require a bit of cleanup now!

Step 4: Here’s where it gets interesting: Mix a glaze using Lahmian Medium and your brown and black washes on your palette. No need for an exact recipe, although the Lahmian Medium should account for about 60-70% of the mixture, with the rest made up of the black and brown. You’ll also want slightly more black than brown for a World Eater, (while mixing in a lot more brown and little to no black would give you a pretty nice glaze for a Death Guard legionnaire, incidentally). Once you have mixed the colours together, quickly and generously paint them onto the white armour, and do it in one go, so as not to produce any ugly borders. The glaze will shade the armour without drying on the even surfaces in a splotchy way (as a mere wash would), while also giving the whole armour a slightly muddy and off-white quality. Here’s what the model will look like after this step:

Pre Heresy World Eaters white tutorial (3)
The picture is rather misleading in that it was taken late in the evening, in less than ideal lighting. I just wanted to keep painting instead of waiting for better light, so the photo isn’t as good as it should be. The white is just as bright as the white in the following picture, if not brighter, it just doesn’t appear that way.

Step 5: We’re almost there. Now give the model some time to dry (!) before you tackle the next step. When everything is nice and dry, you put some Charadon Granite (or your alternate dark brown/dark grey) onto your palette and use a small piece of blister sponge to dip into it. Then you should sponge off most of the colour back onto the palette or onto a piece of kitchen towel. When there’s just a bit of colour left, use the sponge to carefully add weathering to the surfaces of the armour. This is not an exact science, so you need to experiment a bit. You can also build up the effect in several layers. The sponge weathering will end up looking very organic, which is great, plus it’s really useful for covering up errors and ugly areas. Just keep in mind that you will also have to use the effect on the blue parts of the armour (i.e. the shoulder pads and backpack), so they won’t stick out later by being too clean.

Anyway, I added multiple layers of spomge weathering until I was happy. And here’s the mostly finished model:

Pre Heresy World Eaters white tutorial (4)
As you can see, the shoulder pad and backpack are already back in place. You can do this as soon as you no longer need access to every part of the armour. I also added a selective edge highlight to some raised parts of the armour, such as the helmet’s faceplate, the elbows, the armour plate covering the model’s stomach etc. Oh, and I brushed some Steel Legion Drab over the model’s feet and greaves, in order to create a visual connection with the base. Of course you’ll have to adjust this part, depending on the colour scheme you have chosen for your basing.

As for the blood, like I said above, I use Tamiya Clear Red (although I keep hearing good things about GW Blood for the Blood God as well, and it may be easier to source), flicking it at the armour with the help of a toothbrush and then adding some of the paint to select areas. When touching up the gore, you should mix in some brown and/or black wash, so you’ll get slightly different hues and saturations that will make the blood look more believable.

Oh, and let me speak about the blue parts as well: When I painted my first 30k World Eater, I didn’t have any suitable blue, so I just used Vallejo Magic Blue with a drop of black, mostly as a stopgap solution. However, I really like the colour that resulted from this, so I’ve decided to keep the recipe for the rest of my models.

Anyway, so much for the tutorial. Aftersome final touchups and a completed base, here’s what the model looks like now:

3rd 30k World Eater (1)

“You think we take our opponents’ skulls to mock them, Evocatus? Hah, quite the opposite!
Even in death, your eyes will be allowed to glimpse the battlefield once more — what greater honour could be bestowed upon a true warrior?”

Legionary Molax of the Triarii, XII Legion Astartes. Seconded to the 4th assault company following the Battle of Armatura.

3rd 30k World Eater (2)
3rd 30k World Eater (3)
3rd 30k World Eater (4)

Regarding the conversion itself, I wanted to experiment with a more gladiatorial look, which I believe turned out pretty convincing. I also spliced in some actual Khorne Berzerker parts to create the kind of “mongrel” plate that should have been a pretty regular occurence in the XII legion, considering its rather heads-on approach to warfare and the amount of losses taken during the outbreak of the Heresy and the subsequent Shadow War.

And here are all three test models I have painted so far:

30k World Eaters test models (3)
One thing you can see in the picture is how the ratio between the black and brown washes will slightly influence the colour of the armour: If you look closely, you’ll see that Molax is slightly more brownish than the other two. This is because I used slightly more brown wash when mixing the glaze for his armour. The other two models use less brown and more black, leading to a somewhat colder look.

Another thing that’s evident in the picture is how the models are quite a bit less uniform than the stock Betrayal of Calth tactical Marines. I really wanted my World Eaters to have a slightly more ragtag appearance, as this just seems appropriate for the legion. As I keep adding new models, I think some of them will look quite different, with the spectrum ranging from fairly standard Mk IV Marines to guys in far less standardised gear, yet I hope to include some visual touches that pull it all together, creating a feeling of visual coherency while also allowing for quite a bit of variation at the same time.

Speaking of which, here are the two 30k models I am currently working on:

Plasma Gunner and Triarius WIP (2)
Plasma Gunner and Triarius WIP (3)
The model on the right further explores the Triarii archetype, while the guy on the left is a pretty standard plasma gunner. Like I said, these may seem rather different when compared like this, but I do think they’ll work together rather nicely in the finished squad. And there’s always the option of spinning off the Triarii into their own squad somewhere along the way, of course.

In this particular case, the main challenge was to make the guy with the plasma gun look suitably massive and menacing and not like “that boring model with the gun”. I think I was fairly successful with that, though.

And there’s also another model that I am fairly excited about. This guy:

WE Praetor 30k WIP (2)
WE Praetor 30k WIP (1)
The model was originally built as an officer for my 40k World Eaters, but it seems as though he might make an even better officer for my small 30k project, even if he’s a bit more openly Khornate than the other guys so far — personally, I think that all bets were really off for the World Eaters after Armatura and Nuceria, so I imagine some Khornate elements will have begun to sneak into the legion by then — after all, they were definitely present shortly after the Heresy, according to Khârn: Eater of Worlds.


Anyway so much for the status of my little 30k project. Again, don’t expect this to grow into a fully-fledged Horus Heresy army any time soon! That being said, this project is a great way of exploring an earlier incarnation of my 40k World Eaters and of using ideas that I’ve always found cool but couldn’t make work on the 40k setting. So it’s definitely a win/win situation for now 😉

I would love to hear any feedback you might have! And as always, thanks for looking and stay tuned for more!

Meanwhile, back at Isstvan…

Posted in Conversions, paintjob, World Eaters with tags , , , , , , , , , , , on December 9, 2015 by krautscientist

30k legion badge02

Painting the models for my AdMech warband left me in a fairly productive mood, and before my motivation had any chance of dying down again, I took the opportunity to paint my first 30k World Eaters test model. This turned out to be quite an educational experience. But we’ll be getting to that.

Let me start by sharing my research first — I actually love doing research for projects, and it has become a sizeable part of the hobby for me. Before I tackle a particularly challenging or interesting project, I will spend quite some time digging through a mountain of material, ranging from threads I like to random Google image search results.

I also did this in order to figure out what kind of look I wanted for my Pre-Heresy World Eaters. In fact, I’ve been squirreling away inspirational images of 30k World Eaters for quite a while now – just in case 😉 But when all was said and done, three main sources of inspiration remained:

1. Mr. Poom’s World Eaters

World Eaters by Mr. Poom
Mr. Poom’s version of the 8th assault company is very possibly the coolest 30k World Eaters army in existence right now, so it shouldn’t surprise you that I chose his models as one of my main inspirations. I really wanted to emulate the particular shade of off-white he uses for the armour. Beyond that, I think that Mr. Poom’s style is far more exact and meticulous than my own, so I would need to find a way of covering up some of my inevitable mistakes — weathering and battle damage were the obvious answers!

2. Triarii by kizzdougs

World Eater by kizzdougs
There isn’t a more beautifully weathered and battle-damaged World Eater than the one shown above, painted by kizzdougs. Now kizzdougs paints some of the most amazing 30k models around, yet what’s the most fascinating is how he can do both the ultra-exact, clean and stunningly highlighted look of his Emperor’s Children as well as the thoroughly beaten-up, weathered look of the XII or IV legions. His Triarii legionary serves as a stunning example of this and became another important inspiration. However, I wanted a slightly less weathered look for my own World Eater.

3. World Eaters by James Karch

World Eater by James Karch
James Karch is the owner of another absolutely stunning World Eaters army (also beautifully documented as Army of the Month in Warhammer:Visions #4, still one of my favourite spreads ever from that magazine). And his army served as the kind of missing link I needed: It has the off-white of Mr. Poom’s World Eaters, but also a weathered look similar to kizzdougs’ model. So this army became the third vital piece to complete the triptych.

With the elements I liked and wanted to emulate firmly in my mind, I started painting. And while the white armour turned out to be a bit of a challenge, I also discovered that battle damage and weathering is a great tool for covering up any slipups 😉 Anyway, after a short while (and a bit of a nervous breakdown somewhere near the halfway mark), my first 30k test model was finished. Take a look:


30k World Eater (1)
“I will never forget the day the legion ships came to my world. The whispered benedictions, forbidden even then, that accompanied them.  And those of us who aspired to a place among their ranks: Noble Hergan. Soulful Krizti. Brave Sharlen.
How they laughed at me, the baseborn butcher’s boy.

And when those of the legion came to walk among us, clad in armour of white and blue, they were glorious and terrible, and we caught a first glimpse of the consequences our choice might have.

They passed over noble Hergan and soulful Krizti, and killed brave Sharlen when he dared to talk back to them, then laughed over his broken body in voices that were deep and cruel.

And they chose me, the baseborn butcher’s boy.

Because for all its perceived flaws, the twelfth had learned even back then what others would only find out later
(and many too late):

That the Emperor’s Crusade had little need of thinkers and poets, philosophers or noblemen.
It needed butchers.”

Legionary Shadrak, Eigar Veteran Tactical squad, 4th assault company, XII Legion Astartes


30k World Eater (2)
30k World Eater (4)
30k World Eater (5)
30k World Eater (6)

All in all, I am really rather happy with my first effort. Not everything may have gone 100% according to plan, but the finished model clearly has the look I wanted. It was also nice to be able to use those red World Eaters decals the way originally intended by Forgeworld (although the decals’ uneven performance remains a minor concern).

Oh, here’s a closer look at the right shoulder pad, by the way:

30k World Eater (8)
In the end, the tactical markings from the Betrayal at Calth decal sheet turned out to be far easier to apply to the shoulder pad than the ones from the World Eaters decal sheet. I added a small WE legion badge on top, in order to denote veteran status.

So, all in all, here’s what I have learned while painting the model:

  • white an be just as unenjoyable to paint as red — out of the frying pan and into the fire, I guess 😉
  • That said, I will try a different recipe for my white next time around: The model was painted over a black (and silver) basecoat, because that recipe had worked so well on my AdMech models, with different colours blocked in later. It didn’t work so well with white. And the approach was rather backwards to begin with, so I’ll consider actually using a white undercoat on my nect 30k World Eater.
  • Lahmian Medium turned into an indispensable tool when it came to shading the armour: I mixed it with a bit of black and brown wash for a shade that was just heavy enough, but not so heavy as to ruin the white.
  • I tried sponge weathering for the first time, and while there’s quite a bit of room for improvement, it’s a really fun and rather effective technique.
  • I still have to get used to the new Space Marine bases, as they seem freakishly big to me. Every model seems like a Terminator now, simply by virtue of a bigger base 😉 I think I really like the effect for a Killteam or warband but would find it a bit distracting on an entire army…

So much for my first 30k World Eater. It’s been fun! And, of course, I’d love to hear any feedback you might have!

As always, thanks for looking and stay tuned for more!

30k World Eater (7)