Archive for cypher

Kitbashes from opposite ends of 40k, pt. 2

Posted in 40k, Chaos, Conversions, Custodes, WIP, World Eaters with tags , , , , , , , , , , , , , , , on August 17, 2014 by krautscientist

You might feel inclined to call my scheduling slightly scattershot – and you’d be right – but I already have an update to my last post, further eloborating on each of the respective conversion projects, and I simply want to share the results with you, so let’s take a look: 😉

 

1. Custodes

Certainly the smallest of the updates, but even after showing you this Custodian in archaic power armour…

Squad Asklepian 31
…I just couldn’t stop myself from tweaking the kitbash even further. The photo above made me realise that the model’s waist seemed rather waspish, for one, so I tried bulking it out a little:

Squad Asklepian (34)
I used some leftover Terminator armour plates for this task, and I have to say I rather like the added bulk! And while I was added, I could not resist replacing the left shoulder pad with a studded one from the Sternguard kit, mirroring the studded leg armour on that side — in fact, I should probably have done this from the get go!

Squad Asklepian (35)
Just some small changes, admittedly, but they help me homing in on what I want the finished model to look like!

2. More Fallen Angels

I should have known before that converting my own version of Cypher wouldn’t be the actual end of this particular project. As a matter of fact, it only took a small remark from fellow hobbyist ghosty over on Dakka to provide me with the urge to kitbash some additional Fallen Angels — stupid hobby ADD!

Fortunately enough, I still did have quite a few DA bitz as well as some leftover Dark Angels from the Dark Vengeance boxed set lying around, so indulging my fancy was really easy enough 😉

So I built two test models for a small squad (or Kill Team) of Fallen Angels. Take a look:

Fallen Angels (1)
This first model was built from the DA Sergeant that came with Dark Vengeance. I simply replaced his weapons and head and added some additional bitz and bobs.

The second model was mainly a kitbash from different Space Marine bitz with a chaos bit or two thrown into the mix:

Fallen Angels (3)
Fallen Angels (2)
One thing that was important to me was that these guys’ allegiance was supposed to be somewhat ambiguous. Yes, they are more ragged and more sinister than your average Dark Angel, but even if they are followers of chaos at this point, it’s out of necessity rather than conviction. That’s why I restrained myself when it came to adding chaotic and spiky bitz. They’ll also fit together nicely with my Cypher conversion, I believe.

I also started working on a Fallen in Terminator armour to accompany these guys. Once again, instead of going for straight out chaotic spikyness, I tried to achieve the brooding, sinister look you see in some of GW’s own artwork for Fallen Angels, with only some slightly heretical touches here and there…

Fallen Angels Terminator WIP (2)
Fallen Angels Terminator WIP (1)
Fallen Angels Terminator WIP (3)
Granted, the huge daemon sword is a bit of a giveaway, but again, I like the idea that this is a weapon that the Fallen picked up by necessity rather than inclination. I also have to admit that the helmet remains a bit of an experiment at this point — feel free to let me know what you think!

Here are all of my Fallen together:

Fallen Angels (5)

 

3.  World Eaters Daemon Prince

Some more work went into my World Eaters Daemon Prince, in order to tidy up the conversion a bit.

World Eaters Daemon Prince (6)
The main addition is a tangle of Butcher’s Nails implants on the model’s back:

World Eaters Daemon Prince (7)
I am pretty happy with how that turned out!

my original plan for the huge collar the Daemon Prince wore in the previous post was to place it around the model’s neck and have it rest atop the crest of cables — but that didn’t end up looking quite as cool as I had hoped. So I tried a slightly different approach, halving the collar and using it almost like a heretical version of the Space Marines’ Iron Halo:

World Eaters Daemon Prince (13)
World Eaters Daemon Prince (14)
One last thing I did was to try adding the wings from the Daemon Prince kit. I wasn’t even sure whether I wanted to add any wings to this guy, to be honest, but I at least wanted to find out how the model would look with them:

World Eaters Daemon Prince (16)

World Eaters Daemon Prince (17)
And to be perfectly honest with you, I really rather like the bulk and presence they add to the model — what do you think?

 

So yeah, those are the three kitbashing projects that have kept me occupied this weekend. I would love to hear any feedback you might have! Oh, and a warning in advance: The next update might be slightly late for work related reasons, so use this one to tide you over until then, alright? 😉

In any case, thanks for looking and stay tuned for more!

Kitbashes from opposite ends of 40k

Posted in 40k, Chaos, Conversions, Custodes, WIP, World Eaters with tags , , , , , , , , , , , , , , , , , on August 14, 2014 by krautscientist

Kitbashing seems to be my most productive hobby activity at the moment: While converting plastic models has been my favourite part of the hobby for a long time, I seem to have worked myself into a bit of a kitbashing frenzy right now, using my work on various conversions as a means to relax. This might be a disappointment to those of you who would like to see some painted plastic on this blog, for a change — I can merely ask you to bear with me here: I will get around to doing some painting eventually, promise 😉

In the meantime, I do have to show a number of new kitbashes to show you: Three wildly different projects from opposite ends of the Warhammer 40,000 universe, so to speak. Here we go:

 

1. Golden Boys

Granted, it has been some time since we last heard of my kitbashed Legio Custodes army — but the project is far from dead, I assure you! By way of proof, let me show you two (fairly) recent kitbashes I made for this project:

First of, a conversion I am extremely happy with: Meet Constantin Valdor, Chief-Custodian and Captain General of the Legio Custodes:

Constantin Valdor WIP (1)
Constantin Valdor WIP (2)
Constantin Valdor WIP (3)
Even though it’s only a Space Marine based kitbash, I believe most of the visual cues are there to make the model a reasonable approximation of the artwork for Valdor. While most conversions have him running forward, however, this one is clearly more static, resembling his appearance in this piece of artwork.

Constantin Valdor WIP (4)

As you can see, most of the bitz for the conversion came from the Sternguard kit, which is basically your go-to source when it comes to building ostentatious looking Marine characters. The kit has also given me the chance to touch up a couple of earlier conversions, among them one of the Marines for my squad in various marks of power armour. Here’s the old version of the model in question:

Squad Asklepian 22
I think we can all agree that the legs on this guy were a little iffy. Fortunately, one of the beautiful leg pairs from the Sternguard kit allowed me to give this guy a bit more presence. Take a look:

Squad Asklepian 32
Squad Asklepian 31
The model now looks quite a bit more massive than before, which I think is a rather nice fit for the slightly clunky, archaic looking armour on the upper body.

So here are the two models together:

Squad Asklepian 33
My small Custodes project may be far from finished, but it’s a great little sandbox I can always return to in order to tinker away on a model or two for a while. It also helps me get the urge to build blinged-out loyalists out of my system, which is a great help when I need to stay focused on my more chaotic projects 😉

2. Lord of the Fallen

Next up, a very recent kitbash: Last Sunday evening, I sat down and converted my own version of Cypher, apropos of nothing. I didn’t even need the model from a gameplay perspective, mind you: I just felt that Cypher had been a staple of the CSM background for so long that I needed to build my own version. Here it is:

Cypher WIP (1)
Cypher WIP (2)
Cypher WIP (3)
Cypher WIP (4)

As you can see, the conversion was based on the model for Interrogator Chaplain Seraphicus from the Dark Vengeance limited edition set I purchased back in 2012. It did feel kind of sacrilegious to cut apart a limited edition model like this, to be honest, but I figured it wouldn’t do any good to leave the model lying around for another two years — plus I will need those lovely smokestacks from Seraphicus’s backpack when I eventually convert the 4th assault company’s Apothecary, so that made the decision a bit easier 😉 What’s more, fellow hobbyist and Skull-Championess Flint13 pointed out that desecrating an Interrogator Chaplain by converting him into the Dark Angels’ worst enemy was strangely fitting, in a way…

Beyond those considerations, the conversion is fairly straightforward from a structural perspective, which gave me the liberty of lavishing some extra work on a couple of small details: I originally considered having him in a more static pose, with the arms held down. But when it came to building the model, I just couldn’t resist spacing his arms as far apart as I did, making it look like he’s covering a huge area with his shots — it’s just the way I imagine him in the midst of battle, guns blazing, and it works for me. I also obsessed over which pistols to use for the conversion for quite a while (and I am really happy with my eventual choice). And I spent far more work on that backpack than I would care to admit…

Cypher WIP (5)

 

3.  A daemonic gladiator

And finally, as if to prove that I haven’t forgotten my World Eaters, a very early WIP I am currently working on:
I have gone on record saying that I am not a huge fan of the fairly underwhelming plastic Daemon Prince kit. In fact, I kitbashed my first own Daemon Prince at one point, partly out of a desire to avoid having to use the “official” model. But as karma would have it, I did still have a mostly complete Daemon Prince kit lying around, and I felt the urge to challenge myself with trying to come up with a version of the model that fits the gladiatorial look and feel of the World Eaters more closely, while trying to dial back some of the cartoon villain look. Here’s the result:

World Eaters Daemon Prince (4)
World Eaters Daemon Prince (3)
The model’s nowhere near finished, of course: What you see above was only started yesterday afternoon, but I think I may be on to something here…?

 

Anyway, so far for my current kitbashes — they really serve as a great way to relax for me, funnily enough, and as the one part of the hobby that I never seem to tire of.

So, let me know whatever feedback or suggestions you might have in the comments! And, as always, thanks for looking and stay tuned for more!