Archive for CSM

Berzerker (R)evolution

Posted in 40k, Chaos, Conversions, paintjob, WIP, World Eaters with tags , , , , , , , , , , , , , , , , , , , on May 14, 2019 by krautscientist

After last week saw me complete a World Eaters Dreadnought, today another member of the XII legion muscles his way to the front of the queue — so what is this about?

The recent Chaos Space Marines release has been a bit of a bittersweet affair for me. Sweet, of course, because the models are obviously brilliant, and such a long overdue reworking of some rather ancient kits. At the same time, however, the added size of the new CSM makes a rather big part of my World Eaters look pretty runtish. There’s also the fact that I don’t see myself revamping the entire army anytime soon — or, in fact, ever: I’m not sure I still have it in me to build and paint huge 40k armies, as I am much more interested in smaller, bite-sized challenges like INQ28 retinues or single pieces that appeal to me. And yet I did of course want to get in on some sweet chaotic action — so what was I to do?

The best possible approach was to start by purchasing some new plastic crack, of course, so I hot myself a box of vanilla Chaos Space Marines and Havocs each (I just couldn’t resist the massive, brutal look of the Havocs, even if rules don’t even interest me all that much at this point). And I began some preliminary experimentation.

Now as many of you will already know from firsthand experience, the new CSM are noticeably taller than the older models, and that makes quite a few of my chaos models look rather weird next to the new guys. Unfortunately, this includes a fair bit of my still unpainted stuff. So the first order of the day was to find out which of my more recent (unpainted) chaos models were still salvageable. In order to find out, I quickly poster-tacked together one of the new models to serve as a point of reference:

Keep this guy in mind — we’ll be seeing more of him shortly…

This guy was mostly built straight out of the box — although, as you can see, I couldn’t help adding a Caedere Remissum helmet crest, even at this early hour — more on that particular design decision later…

Using the new guy as a point of reference, I was lucky enough to find some models that might still work.

There’s my WIP Iron Warriors kill team, for starters:

Now this project was started before Kill Team was even a thing (again), so I mostly played it by ear back then, and built models that appealed to me from a visual standpoint. At the same time, I did try to go beyond the look of vanilla CSM with this project, so most of the models (except for the one tester lurking in the back whom you may safely ignore) were mostly based on Chose models from the Dark Vengeance boxed set. And while the models are still a bit shorter than the new CSM, they don’t look too out of place. Two Iron Warriors remain unpainted, but have already been built, as you can see, and after that, I think I’ll be adding a heavy weapons specialist (built from one of the new kits), add a few suitably IW-themed cultists and call it a day. The finished team should hopefully still work well enough. And KiIl Team, with its smaller model count and potential larger focus on individual characters (and models) appeals more to me than standard 40k at this point.

But where does that leave my World Eaters?

Well, the good news is that I found some guys that should still work rather well in this new, upscaled world. Take a look:

Once again, most of these conversions were heavily based on the Dark Vengeance Chosen, so they still work fairly well (even though they are just a tad shorter than the new models):

I also think that coming up with a really cool World Eaters Kill Team (code name “The Hateful Eight”) should be a very rewarding project in and of itself. If that prompts me to keep building and painting World Eaters for 40k proper afterwards, so much the better. But for now, I want to explore the new kits and use them to build some of the best World Eaters I can come up with — at least that’s the plan.

That being said, the new kits turn this into an interesting challenge, because many well established conversion recipes may not work anymore due to the slightly changed scale (many stock arms, for instance, just seem too short on the new models. As do the chaos marauder arms I have used many times to create the classic “bare arm” World Eaters look). So my first little project was to find out how to make the new vanilla CSM look more like World Eaters, so I started to mess around with a couple of bitz:

The good news is that most older helmets and shoulder pads should still work fairly well — this includes some of the older FW shoulder pads (as seen here with the pauldrons from the berzerker conversion kits. They torso pieces from the same kit, however, are right out).

But I also wanted to do something slightly more involved for my first test model, and after looking for a while at a Blood Warrior chest piece, I got a bit more creative:

Some of the new breastplates are still a bit bland, to be honest, so I decided to splice in some Khornate goodness: I carefully cut through the torso front just above the abdomen as seen in the picture above.

The Blood Warrior breastplate (seen on the left) fit with just the slightest fraction of shaving. However, there was a huge gap underneath it that, while not directly visible when looking at the model from the front, still made it obvious that the torso was hollow. So I used a bit of GS to create a small lip, like this:

Then the Blood Warriors breastplate was simply glued on. The GS plugged the gap, and the new torso works really well, what with the cabling on the abdominal section and everything:


Granted, the whole assembly seemed a little less convincing when seen from the side:

But most of this should end up being covered by the arms anyhow — I merely added some GS to create a straight surface for the arms to attach to.

Here’s a mockup of the entire body:

Now I was really pleased with myself at this point about how clever a conversion I had created. However, I only realised after completing this particular conversion that to replace the breastplate like that would have been even easier on some of the other bodies from the kit, because those already have the breastplates and abdominal section separated from the get-go. Oh well, we live and learn… ๐Ÿ˜‰

Anyway, a short while later, I had my first World Eaters test model made with the new CSM kit:


I think there’s something so malevolent about this guy’s pose — like a predator stalking its prey…

Of course I decided that I would need to get this chap painted right away, so I adapted the colour scheme I had used for my recent Chaos Dreadnought for use on the smaller model and used quite a bit of time to make sure to get the paintjob just right…

Once again, brighter reds and oranges were used both for edge higlights, but also to create scratches and scuff marks, in order to make the armour look pitted and ancient, and to suggest a texture to the whole warplate.

Oh, I also included a shout-out to Wade Pryce’s World Eaters, one of my biggest inspirations when I got back into the hobby: The stylised legion badge was very much inspired by the way Wade used to paint the World Eaters symbol.

Anyway, to make a long story short, allow me to share my first finished World Eaters test model created using the new CSM kit, fully painted and based:








I did decide to include a bit of blood on the chainsword, using Tamiya Clear Red to create the effect:

And here’s another peak at that legion badge inspired by Wade Pryce’s old models:

And here’s a pretty nice shot (if I do say so myself) of the new World Eater next to Argus the Brazen:

Now as for the evolution of my berzerker painting scheme and, indeed, my Khorne berzerkers, I have prepared a little comparison shot to show you the evolution, as it were:

On the left is one of the first Khorne Berzerkers I painted back in 1998 or so, back when the plastic kit was released. These guys still saw use in my modern army, mostly because I was too lazy to replace them. Next in line is the first World Eater I painted when getting back into the hobby after a longer hiatus, in 2010, but using a slightly tweaked recipe. The third guy was an experiment on replacing the – by then OOP – Blood Red with Mephiston Red, but back then I wasn’t quite happy with the effect. And there’s my brand new little guy — maybe this time I have finally managed to nail the recipe? What do you guys think?

I also took a couple of scale comparison pictures, just to illustrate my earlier point about the new kit making most of the classic catalogue look rather tiny.ย  The difference is not equally pronounced between all CSM: For instance, the DV Chosen are just a tad shorter than the new CSM, but it’s not too obvious. Old CSM models, however, just look really awkward next to the new guys, at least if untweaked. Take a look:

Almost a little painful to look at, isn’t it? ๐Ÿ˜‰ The new Marine just seems much taller — and indeed he is. Now here’s a comparison with an old model that was nevertheless aย  slightly more involved kitbash:

This comparison is interesting because it shows off both the evolution of my painting recipe, as well as the fact that the legs from the new kit are quite a bit longer, the torso is broader, and the backpack no longer dominated the entire model as much. It’s especially obvious when looking at the back of the models:

Next up, another round of comparisons with some taller models:

For starters, here’s my new World Eater next to Brother Arcturus Diomedes, based on a Primaris marine:

As you can see, the new CSM are not quite as tall as Primaris Marines, but they are closed (and could be used as true scale models opposite Primaris in a pinch).

And here’s a comparison with one of the wonderful converted World Eaters my buddy Augustus b’Raass sent me earlier this year:

Augustus’ model was created using older part, but it’s heavily converted and built to be taller than a standard CSM, so you barely notice the difference in height. So that’s the good news for those hobbyists with highly customised and converted chaos armies, I suppose — your guys still look good, in spite of the scale creep ๐Ÿ˜‰

Also, don’t get me wrong: Ultimately I would say the new scale is for the best — it finally gives the Chaos Space Marines the stature they deserve, because unlike their loyalist counterparts, they have skipped one or two rounds of scale creep. By the same token, however, the change is so significant that it presents a couple of challenges to chaos players now, but those can definitely be overcome. In fact, I would say that to figure out how best to use the new kits and how to work around the changes in scale seems like just the kind of creative challenge that should delight chaos players all over the world!

For now, I am pretty happy with my first test model, and I am actually looking forward to painting a couple of World Eaters again — who would have expected that, eh? Anyway, I would be happy to hear your thoughts on the new model, of course, so please leave a comment! And, as always, thanks for looking and stay tuned for more! ๐Ÿ™‚

State of the Hunt, Week 14/2019: Another chaotic interlude…

Posted in 40k, Chaos, Conversions, state of the hunt, WIP, World Eaters with tags , , , , , , , , , , , , , , , on April 2, 2019 by krautscientist

So, something unrelated to my #HeroQuest2019 project for today’s update — don’t worry, though, work on my HeroQuest models continues apace! However, with all of those incredible new Chaos Space Marine models hitting the shelves, I felt the need for just a wee little bit of chaotic kitbashing — indeed the irony of all of those models finally arriving just when I happen to have taken a bit of a hiatus from 40k has not escaped me…

For now I have mostly resisted the lure of the new kits — or of the Shadowspear boxed set, for that matter: While I basically love everything I have seen so far, I can simply not justify dropping over a hundred Euros on yet another box that would remain unpainted for the foreseeable future. But I do have my ways, and so a recent bitz delivery has provided me with the raw material for some smaller experiments. So let us take a look, shall we…?

 

I. The Host

Let’s start with what’s probably the least impressive offering for today, albeit one that I am nevertheless pretty happy with: Ever since first laying eyes on those rogue psykers that came with Blackstone Fortress, I have felt the need to use one of them to create a Daemonhost (most likely for use in INQ28): There’s just something about the chains and weighing down the psyker’s floating body that really recalls the Daemonhost aesthetics originally introduced by the 54mm version of Inquisitor — plus I have been saving that perfect Daemonhost head (originally from the Hellstriders of Slaanesh) for such a conversion. So anyway, here’s what I have made:

As you can see, it’s a pretty straightforward conversion: I have mostly just replaced one of the arms and the head, and have also shaved off most of the openly chaotic decoration. I still think the changes have nicely tweaked the general look and feel of the model — just a few purity seals and imperial doodads, and this poor wretched soul is ready for grueling servitude in an inquisitorial retinue (probably of the Ordo Malleus flavour, come to think of it).

This was, however, merely the warmup:

 

II. Don’t look a gift Dread in the mouth…

The second model I would like to share with you has been a long time coming: Back when I visited fellow hobbyist Augustus b’Raass in Amsterdam in 2017, he was generous enough to present me not only with a pile of conversion bitz, but also with one of the old Forgeworld World Eaters Dreadnoughts:


Now I have a fond personal history with those FW Dreadnoughts, because they were my first proper contact with Forgeworld to begin with: Back when I saw those, I remember being utterly blown away with the sheer quality of the sculpts — and there was one for each Traitor Legion, mind you! And all of this at a time where the Traitor Legions didn’t exactly get all that much love from GW proper.

Alas, I never purchased one of the Dreads, and when they went OOP a while ago, I was quietly furious at myself at passing the opportunity to have the World Eaters one in my collection — an oversight that Augustus remedied by way of his wonderful gift.

But I am nothing if not a hobby butterfly, so it took me ages to finally start working on the Dreadnought — I was also missing some proper arms for him, in my defense. But when Augustus recently sent me a wonderful squad of World Eaters, he also included a chaos Dread CC arm in the package, and I definitely got the message: I would have to get the hell off my arse and build that Dreadnought, at long last!

So only one bitz delivery later, I had everything I needed for the model:

So here’s a look at the initial mockup of the Dreadnought:

Most work went into turning that squeaky clean Venerable Dreadnought lascannon arm into a suitably chaotic version that matches the general look of the model. Here’s a closer look at the – mostly finished – gun arm:


I chose the Lascannon, mostly for the visual balance created by those longer barrels. When it came to making it look suitably chaotic, I worked from Forgeworld’s “official” design, trying to match several of the visual cues present in the sculpt, while also putting a small personal spin on things here and there. So here’s a look at Forgeworld’s version:

And here’s the – mostly finished – Lascannon arm I came up with:

There’s also an additional cool little special effect in place here: I decided to base his gun arm on one of the weapons from the Venerable Dreadnought kit in order to be able to keep the arm modular, so that it will accept alternate guns and can make use of the additional weapons I already built back when I converted my first Venerable Dreadnought.

Beyond the arm, I only added one or two bitz to the rest of the model, not wanting to overpower what I think is a brilliant sculpt overall. So here’s a look at the completely built model, already in the intended pose, leaning into its next shot:


Only some cleanup and the base design left, and then I hope I can finally do this guy justice. Wish me luck! ๐Ÿ™‚

 

III. Step into my parlour…

So is that all? Welll, when I said that I had resisted the lure of Shadowspear so far, I may not have been entirely honest with you…

So there’s also this:


As some of you may have already realised, those are the sprues for the Chaos Venom Crawler, the daemon engine included with the Shadowspear boxed set:


I simply had to get my hands on one of those, as there is just so much about the model that I love: It’s a freaking monster spider from hell, for one. I also love how it has all those shared visual cues with various daemon engines: You’ll find little touches from the juggernauts, the Heldrake or the Forgefiend/Maulerfiend all over the creature’s jagged carapace. I love how lithe and deadly it looks (where some of those older daemon engines were a bit clunky). Anyway, I needed one to play around with a bit, so there.

For all my love of the model, however, there was one area that I thoroughly disliked: The head. It was just a bit too weird for my taste (and not the good kind of weird, at that). And it definitely lacked that certain (Khornate) je-ne-sais-quoi. But I felt I had just the idea for that…


A head from the Blood-Slaughterer Impaler, carefully cut down to fit into the carapace. Of course with the first attempt, I was still trying to find my feet, getting the placement right while still keeping that spiked crest in place, just in case I didn’t want to commit to this solution.

It quickly became clear to me that this was the way to go, however, and that getting the head to look right would mostly consist of shaving down the neck portion until it fit just so. So I did just that, and the reszlts ended up looking better and better:


In case anyone was wondering about the scale of the model, by the way: Here’s a comparison picture with the Venom Crawler next to a Myphitic Blighthauler:

I can only commend whoever planned out the way this model should be assembled for an excellent job! It goes together like a dream, and the legs can be easily left off to have an easier time during the painting stage — excellent craftsmanship, this one! At the same time, the finished model looks far more delicate and complex than the relatively few parts would suggest. As for my replacement head, I kept shaving, millimetre by millimetre…

And after a few more sessions, I think I have the perfect setup:

Of course the seam between both parts still needs a bit of cleanup, some additional cabling etc. — but I think the head works really well like that. In case anybody else is considering a headswap on this beast, let me just say that a Armiger head would be a perfect fit (and the cyclopean one makes for an excellent, sinister Dark Mechanicum look) — just sayin’ ๐Ÿ˜‰

 

 

IV. A shout out in closing…

While you may actually have seen this elsewhere, just to be on the safe side: The first issue of 28 MAGAZINE, a free digital mag dealing with the wonderful world of INQ28 (and AoS28, for that matter) has been out for a while now, and you should definitely check it out and immediately download it here. It is the most extraordinary thing.

So that’s it for today’s update. If you have any thoughts about my small chaotic projects, I would of course be delighted to hear them! And, as always, thanks for looking and stay tuned for more! ๐Ÿ™‚

A Child for the Warrior King, pt.3: The Hound

Posted in 40k, Chaos, Conversions, WIP, World Eaters with tags , , , , , , , , , , , , , , , , , , , , , on July 30, 2018 by krautscientist

With the ETL VI deadline fast approaching, this last week was mostly given over to the task of completing my Renegade Armiger Warglaive, and I would very much like to share my progress on this project with you today! It wasn’t all smooth sailing, either, because Germany has been in the iron grip of a heat wave for quite a while now, with temperatures solidly in the mid-30s Celsius degrees for most of last week — certainly not unheard of in other parts of the world, but not something we are all that used to in my particular neck of the woods…

But I soldiered on regardless, so let’s take a look at what I have to show for my perseverance:

Here’s where we left off last time:

The biggest task at this point was to paint the bigger amour plates for the legs as well as the top carapace. In order to save myself some time, I decided to use GW’s Mephiston Red spray as an undercoat for the armour plates. But while it did end up laying down a nice, even coat of red, the red was also fairly flat and chalky — so I did end up re-painting all the red areas anyway…

In the end, it probably did save me some time, after all, but it was certainly not a game changer on par with, say, the Leadbelcher spray.

Anyway, I tackled the armour plates one after another, picking out the various details and blocking in the different colours. The biggest piece of work was the top carapace, of course, so that’s where I started. Here it is, with most of the detail already blocked in:

As you can see, I also added some decals during this stage: These days, I never save the decals until everything else has been painted, because that will invariable make them look tacked on, almost like an afterthought. By applying them sooner, they can be weathered and damaged along with the rest of the model, as needed, in order to actually make them look more realistic. Now in this case, this only really involved a subtle pass of sepia wash to make them look just a bit more natural, but it’s a habit I have picked up. Besides, none of them were in the way of the eventual highlighting, so that helped, too ๐Ÿ˜‰


Some of the decals were actually chosen to tie the model into the lore of my World Eaters army: The paw print hints at Gilgamesh’s honorary membership in the Legio Audax, the “Ember Wolves” (while the Titan Legio is an actual part of the background, as of “Betrayer”, I did make up Gilgamesh’s membership in it as part of my own head canon).

Meanwhile, the numerals on the right pauldron stand for the XII Legion’s IVth company — mirroring a similar marking on Gilgamesh’s right shoulder guard:


So here’s what the carapace looked like at this stage:


And here it is, a short while later, with all of the missing detail painted and a pretty serious (at least for my standard) amount of highlighting in place:

The rest of the armour plates were given the same treatment, and while none of this is any award winning stuff, the subtly higlighted red ended up looking quite a bit deeper than the armour on Gilgamesh, while still fitting the overall look: While the Armiger should still look like it belongs, it also shows off how I have grown as a painter over the last couple of years, and I like that, to be honest ๐Ÿ˜‰

So anyway, here’s the Armiger in its almost finished state:

At this point, I made a To Do list for myself listing all the small cleanup work and small tweaks I still needed to do before the model would be finished. I also made an eleventh hour decision to diverge from the original conversion, as the original plan had been to add some marauder shields on top of the Armiger’s pauldrons, for an even more baroque, chaotic look. Like so:

But when I added them to the pauldrons, I just couldn’t shake the feeling that the model actually worked better without them, so after hemming and hawing and asking for feedback over at the forums, I eventually decided to leave them off — something about them just didn’t quite click with me, while the model did seem complete enough without them.

So at this point it was mainly a matter of checking all of the boxes on my To Do list, one after another.

One area of notice was the detailing of the cockpit and reactor section, and I am pretty happy with how that area came out. Take a look:


For the cockpit displays, I chose an approach I had seen on a Knight by fellow hobbyist Noigrim — I really liked the idea of approaching enemies being visible as red dots on the radar ๐Ÿ˜‰

And here’s a closer look at the reactor section:

This is how the whole assembly looks when seen from the side, by the way:

From a conversion perspective, this is probably the most involved customisation on the entire model, but I do think it has been worth it.

The other big thing to take care of was the base. Here’s the completed build I came up with:


Gilgamesh’s base uses several pieces of broken imperial statuary (courtesy of GW’s “Honoured Imperium” terrain kit), and I thought it would be cool to match that look, albeit on a slightly smaller scale. So the base was built around a shattered statue’s broken sword (once again, a very apt metaphor for the failing Imperium of Man, and all that), and I used different kinds of slate, sand and cork to build up a suitable amount of rubble and texture around it all. The main floor texture was, once again, created using Vallejo’s Sandy Paste.

I also did a preliminary dry fitting to find out wether the model would fit neatly onto the base:

And after that, it was off to the painting desk for one last time. Here’s the finished base, completed a short while later:

As you can see, some skulls and broken Ultramarines armour pieces were also added to the base, if only to tie the model into the 28mm scale a bit better (and make for smaller areas of visual interest).

And with that, my Renegade Armiger was finished. So let’s take a look at the model, shall we?

 

The Hound

Enkidu Lance
attached to the XII Legion’s 4th assault company

 








And a couple of detail shots, of course:

First up, the Armiger with its carapace removed and a closer look at the pilot:

The plan was to make the pilot look similar to Gilgamesh’s pilot, the Baron Harrowthorne:

At the same time, I wanted it to be fairly obvious that the Hound is below the Baron in rank, so his uniform is just a bit plainer. I think the finished look works pretty well:

The top carapace will – obviously – stay removable, if only because it allows me to show off the custom cockpit and pilot every once in a while ๐Ÿ˜‰ In fact, the entire model retains a certain amount of modularity:


This should provide a nice extra bit of flexibility once the second Armiger (codenamed “The Huntress”) has been completed! Incidentally, the harpoon arm I shared with you in my previous post will actually serve as the Huntress’ stock armament…

Here’s a side view that gives you a better idea of the detail work on the undercarriage:

The amount of detail on the Armiger’s skeleton owes a lot to the “JeffTibbetts school of Knight painting”, as it were ๐Ÿ˜‰

Another area of the model I want to showcase is the banner between the Armiger’s legs:


While loyalist Armigers appear a lot less draped in personal heraldry than their Imperial Knight masters, I wanted to invoke the impression that Armiger pilots may serve their lords for far longer in the Great Eye, so it seemed appropriate to include a banner showing the pilot’s battle honours: It shows both the World Eaters’ legion badge as well as the War Hounds’ old symbol — probably a shout out to the Hound’s epithet.

At the same time, I also wanted to make the banner look more rugged than the banner on the bigger Knight, so I painted it as some kind of roughly tanned hide. I used the approach outlined in Brandon’s tutorial here, with a couple of minor tweaks, and am pretty happy with the finished effect.

Oh, and I also finally managed to take a picture of the face that shows of the Armiger’s glowing eye:

The missing optical sensor on the right side was originally a consequence of a slight miscast of the face, but I think it gives the model an even more sinister and chaotic look, so it actually works in its favour, wouldn’t you agree? ๐Ÿ˜‰

Oh, and here’s a picture of the Armiger and my Renegade Knight Titan, Gilgamesh, “The Warrior King” — “Father and Son”, so to speak:

In fact, I discovered that my older Wargrinder conversion could actually work as an Armiger fairly well, at least from a scale perspective:

And with that, I have managed to finish both my entry for this year’s ETL event as well as my contribution to Azazel’s “Jewel of July” challenge. Pretty nifty, eh? ๐Ÿ˜‰ To be honest, I am immensely pleased with the finished model — I actually put this off as long as I could, and I really had to force myself to start painting, but I couldn’t be any happier with the result. That being said, this has been a pretty involved project, so I think I’ll allow myself a bit of rest and mostly focus on small fry for a bit ๐Ÿ˜‰

But anyway, so far for my first Renegade Armiger Warglaive. It goes without saying that I would love to hear your feedback on the model, so leave me a comment! And, as always, thanks for looking and stay tuned for more!

The State of the Hunt — Week 40

Posted in 40k, Chaos, Conversions, paintjob, Pointless ramblings, state of the hunt, WIP with tags , , , , , , , , , , , , , on October 8, 2016 by krautscientist

Hey everyone, just a teeny tiny update for today, as I’ve just returned home from a little seaside vacation. I spent most of this week gazing out to sea and contemplating life in general and a couple of new hobby projects in particular.

seaside

Unfortunately, none of those proceedings make for particularly interesting blog content so far — bugger!

But wait, I do have something to show you, after all: Because I managed to start on the second model of my Call of Chaos vow before heading out to the Eastern-Frisian isles ๐Ÿ˜‰

So here’s model number two, mostly finished except for a proper base: My Iron Warriors Apothecary:

iron-warriors-apothecary-wip-8
iron-warriors-apothecary-wip-9
iron-warriors-apothecary-wip-10

As I’ve explained in my last post, this guy was usually built as part of a possible Iron Warriors Killteam, and I am pretty happy that the Call of Chaos event now provides me with the incentive to get back to this small gaiden project! I rather like the Iron Warriors I have converted so far, because while they are not true scale, I would refer to them as “true scope”, in that they are quite massive and very detailed, carrying lots of gear and weaponry. This makes them look like true veterans of the Long War, which I think is a pretty good fit for this particular legion!

Here are the models I have so far for the Killteam:

iron-warriors-killteam-wip-2
Judging by the actual Killteam rules, the Terminator Lord in the back will be surplus to requirements, but he really was my proof of concept model to test the waters.ย  Now the next step will be to finish the Apothecary’s (32mm) base and to rebase the two guys on the left on the new, bigger bases, while I am at it. And then I think I’ll ultimately return to this project and add another two or three members (two have already been built, check them out here).

So yeah, it’s not much, but that’s all I have for you today ๐Ÿ™‚

I would love to hear any feedback you might have. Regular service will resume next week. Until then, as always, thanks for looking and stay tuned for more!

iron-warriors-killteam-wip-4

The State of the Hunt — Week 39

Posted in 40k, Chaos, Conversions, paintjob, Pointless ramblings, state of the hunt, WIP, World Eaters with tags , , , , , , , , , , , , , , , , , , , , , on September 28, 2016 by krautscientist

And so, here’s another post dealing with ongoing projects. With the second issue of the new White Dwarf just having arrived on my doorstep earlier today and with the recent release of Genestealer Cults as a dedicated faction, it’ll sure be time to take a closer look at GW’s current shenanigans, but for now, you’ll have to deal with my own hobby activities — bugger ๐Ÿ˜‰ I’ll try to make it worth your while, though!

 

I. Finally making the headlines!

 

I was rather surprised earlier this week to find out one of my models had actually made the cover of the latest issue of The Golden D6, a very cool hobby mag I talked about a while ago. Yet there he is, Lord Captain Lorimar, right in the spot of honour:

d6-issue-7-cover
As I have already told you earlier, the mag is an excellent read for people who are yearning for the kind of broad hobby reading exemplified by the back issues of White Dwarf, so the surprise was very much a welcome one! What’s more, I have a two-part series about enhancing miniature photos (based on this blog post) in issue 6 and 7, so all the more reason to finally check out the mag in more detail! Head over to The Golden D6 website in order to find out more — Adam is also offering a cool bundle deal for the early issues.

II. Heeding the call…once again

After a pretty successful recent ETL V event over at The Bolter & Chainsword, I’ve already thrown myself into the next hobby event hosted by the forum, as a part of a long-term strategy to try and make a dent in my sizeable backlog of unpainted stuff. So I’ve joined this year’s Call of Chaos IX, pledging to complete the following models before December 15th:

call-of-chaos-2016-vow-1

  • a winged Daemon Prince of Khorne with a decidedly gladiatorial look. More about him can be found here.

gladiatorial-daemon-prince-of-khorne-wip

  • an Iron Warriors Apothecary that I originally built as part of an attempt to create a small Iron Warriors kill team — a project I would like to re-invigorate, now that kill teams are actually a thing once more!iron-warriors-apothecary-wip
  • a massive Flesh Hound conversion, originally built last year:giant-flesh-hound-wip-3
  • The excellent Khornate Chaos Lord converted for as a gift from fellow hobbyist BrotherJim: 

    Model converted by BrotherJim

    Model converted by BrotherJim

  • And finally, something special, seeing how this year’s Call of Chaos is actually Tzeentch-themed. Now Tzeentch has always been the least-appealing Chaos God to me, from a visual perspective: I am just not into all the abstract and OTT mutation stuff ๐Ÿ˜‰
    But I did have a pretty nifty idea for a Tzeentchian contribution to my vow: My very own version of Iskandar Khayon, viewpoint character of Aaron Dembski-Bowden’s novel “The Talon of Horus”. Now here’s how Khayon is pictured in the book’s limited edition artwork:iskandar-khayon

    Already pretty cool! But I did feel the need to make some minor tweaks to the concept to make the actual model match my mental image of the character even more closely. So here’s what I came up with:

    iskandar-khayon-wip-1
    iskandar-khayon-wip-2

Now Khayon and BrotherJim’s Chaos Lord are new models, but the bigger part of my vow consists of models that were built last year. So I hope to finally get these stragglers finished for good! Like I said, all of these models will have to be completed before December 15th, so wish me luck! As it happens, I have already made some good progress on my vow, however, because the first model has already been finished…

 

III. The Dog of War

I decided to start my Call of Chaos activities with the giant Flesh Hound conversion:

giant-flesh-hound-wip-3
Now the model does have its minor kinks, mostly because it was assembled from a collection of wildly disparate parts, but I am still very fond of it, so I was really looking forward to getting it painted!

My tweaked skin recipe for Khornate daemons turned out to be super-effective once again, although this time around, although I chose to supplement it with some further tweaks taken from another one of Duncan Rhodes’ excellent video tutorials. So after a short time, the biggest part of the model was finished:

giant-flesh-hound-pip-4
From here on out, all that was left to do was some detail work and the paintjob for the base. Regarding the base, I didn’t want to go completely overboard this time, but I thought the daemon doggie deserved something a bit more elaborate than your rank and file daemon, so I built a base with yet another fallen Astartes:

Giant Flesh Hound's base WIP
Now the special effect this time around was the inclusion of the Astartes’ broken ribs sticking out from his shattered torso. I realise that Space Marine ribs are supposed to be fused together into something like a ossified armour plate, but I chose to have the Rule of Cool trump background lore this time around ๐Ÿ˜‰

When it came to painting the base, I chose Ultramarine colours once again, mostly to get even more routine painting the XII legion for when I tackle the rest of Daemon-Angron’s display base ๐Ÿ˜‰

So here’s the finished base, blood and all:

giant-flesh-hounds-base
And, without further ado, here’s Fido:

giant-flesh-hound-2
giant-flesh-hound-3
giant-flesh-hound-4
giant-flesh-hound-5
giant-flesh-hound-6
giant-flesh-hound-7
giant-flesh-hound-8
I also took a picture of the giant Flesh Hound with one of my recently painted Bloodletters, allowing you to compare both the scale of the model as well as the skin tones:

giant-flesh-hound-1
I am happy to see this guy finished at long last — and now I really can’t wait for GW to release some decent plastic Flesh Hounds, following the same design as the hound accompanying their Khorgos Khul model. I really want a squad of flesh hounds, and they would be super-fluffy for my army — but there’s just no way I am going to purchase those terribly clunky Finecast models…

Anyway: One down, four to go!

giant-flesh-hound-9

 

IV. In closing…

Here’s one last thing I would like to share with you today: A picture I took a while ago, showing all the models I have managed to paint so far this year:

class-of-2016-1

It’s missing my gladiatorial Angron conversion as well as the Flesh Hound, but it’s still a cool little picture, wouldn’t you agree? Only 24 models, all in all, but I am still pretty happy with my output so far — and the year’s not over either!

 

So let me hear any feedback you might have! And, as always, thanks for looking and stay tuned for more!

The Ruinous Powers – Preface

Posted in 40k, Chaos, Conversions with tags , , , , , , on September 24, 2012 by krautscientist

Welcome, dear readers to a week of chaos and corruption here on Eternal Hunt! The ruinous powers draw near, and their dark majesty has warped and sanctified the pages of this blog. But I am getting ahead of myself, all in due time:

Well, it has been a hell of a ride for us chaos players, hasn’t it? But now, the new codex is finally upon us. I already outlined my …mixed feelings about the whole affair, but I am still looking forward to the new book — if only because it will serve to shake things up a bit.

The last days have been up of ups and downs: The first batch of leaked photos showing the new chaos releases left me rather unimpressed and wondering weather my beloved Chaos Space Marines had, as it were, jumped the shark. But as the pictures got less blurry, quite a few of my fears were alleviated along the way.

As it stands, the new release has some great stuff (I love the plastic Raptors, the Fiends are at least very interesting and the Finecast models are quite pretty, albeit not all that immediately useful to me) and some less impressive stuff (the Heldrake is simply not for me, the new CC obliterators look just as horrible as their older kin, the new sorceror is visually inferior to the models from the 90s if you ask me, and it is a little disappointing that GW hasn’t – yet – seen fit to redesign any of the special characters). But all in all, it looks like GW wants to make some rather bold creative decisions, and I am all for that. And while it remains to be seen whether the rules and fluff live up to my expectations, Phil Kelly has yet to disappoint me in any way — plus some of his designer’s notes in the new WD sound quite promising.

So while these are tumultuous times for worshippers of the dark gods, we should also rejoice! And what better way to celebrate than a little modelling extravaganza pledged to the Ruinous Powers?

In the next four days, I will show you four champions of those powers: One for each dark god. Each of them was specifically built and painted for this occasion, so no rehashes! I will also provide a short background for each of the models, but instead of tall tales of the respective champions’ exploits, I will try to capture the essence of the character and – by extension – the power he serves in just a few lines. There’s some edgy high concept stuff for you ๐Ÿ˜‰

So join me on this celebration of the dark gods and look forward to making the acquaintance of four distinguished individuals. And tell me what you think in the comments section!

Tomorrow on “The Ruinous Powers”: Decay.

Until then, as always, thanks for looking and stay tuned for more!

When will the legions be upon us?

Posted in 40k, Chaos, Fluff, Pointless ramblings, World Eaters with tags , , , , , , , , , , on April 27, 2012 by krautscientist

The new Chaos Codex, tentatively called “Codex Chaos Legions”, has been looming on the horizon for quite a while now. And while all the augurs and soothsayers in our wonderful blogosphere cannot yet decide whether it’s a new 4ok edition first, then CSM, then DA or the other way around, it seems reasonably safe to assume that a new book is on its way sooner rather than later. So what better time to discuss my anticipation as well as my misgivings about the whole affair?

Right, to get this out of my system first: Theย  prospect of a new Chaos Codex fills me with equal parts of anticipation and dread. Why is that, you ask? Well, there’s much to consider. Let’s call it: the good, the bad and the (potentially) ugly:

THE GOOD:

New stuff: I think one thing we can all agree upon is that one reason for looking forward to a new book is the fact that it will be accompanied by a slew of new models and kits. Seeing the amount of care given to some of the more recent releases (with each army getting multiple “waves” of great plastic kits and Finecast models), it seems a fair assumption that Chaos will get all that and more. After all, it is without a doubt one of Games Workshop’s most loved and most interesting properties. There are many rumours about what will or will not get a redesign, rerelease or new plastic kit, and while I have my own wish list (new Khorne Berzerkers would be great, legion – or at least god – specific upgrade sprues would be even better, a plastic Dread is almost a no-brainer, and Cultists or Traitor Guard as a new troop choice would be glorious), the bottom line is that it’s probably going to be a huge release with a couple of spectacular new (plastic) kits. In my experience, most Chaos players are also avid converters and kitbashers, so even those kits not immediately useful for your actual army will probably get taken for a ride in all kinds of crazy conversion projects. The new models are really something to look forward to.

New ideas: Speaking as someone relentlessly devoted to cutting up little plastic men, the new models are only half of the fun. The other half is seeing what all those crazy converters on the Internet come up with. Some of those people can take a twenty year old kit and still really make it sing. Imagine what they can do with brand new models and bits! Once the new book hits, Dakka and other forums will be awash with hundreds of new Chaos army projects. Some of them will, of course, be fairly bland or even rubbish. But I am already looking forward to the crazy stuff some of the more talented converters will come up with!

New rules: While I am also a little afraid about possible changes to the rules (We’ll get to that in a minute), the world just needs some changes once in a while. Even as someone who usually doesn’t give a hoot about the rules, I think it’s cool that a new book will help in mixing things up a bit – at least until the new “undefeatable” lists have been universally agreed upon…

THE BAD:

New rules: Like I said, a bit of change is nice every once in a while. Here’s the catch, though: I have to be honest with you, I do quite like the current Codex. While that will probably devalue anything I have to say on the matter for many, let’s take a look:

Say about the old book what you want (for example that it thoroughly lacks flavour), but Gav Thorpe makes an excellent case on his blog (here and here) that the main design paradigm behind the Codex was to emphasise flexibility: Where the (oft-lauded) 3.5 Codex tried to achieve character by adding limits and restrictions to what you could add to your army, the 4th edition codex did a very good job in giving you a lot of flexibility.

For example, I love my World Eaters. I love the fact that they are best when fighting at close quarters and usually cannot hit the side of a barn when shooting at anything. However, I already voiced my dislike for the fact that the recent fluff only ever portrays the World Eaters as nothing but raving lunatics who are always angry all the time and need to kill something every five seconds. I think that this is not very interesting (and not very realistic, but let’s not get started on realism). Often enough, it was also not a lot of fun:

The 3.5 codex forced me to play an army of guys who sometimes just disembarked from their tanks and started running towards the enemey, even if those tanks would get them into the fray much faster than their feet. The codex also didn’t allow me to use jump infantry in my World Eaters army, even though using a jump pack is something that every frenzied berzerker should find very appealing. Let’s face it: All that equipment was great and full of flavour, but the rules sometimes just didn’t add up. I don’t want to play an army that always wins. I want to play an army that conforms to my aesthetic whims and that “feels right” to me. That’s far more important than winning.

The current book made that possible. It allowed me to field a wide array of units. Most of those could be given the mark of Khorne without immediately turning into imbeciles. I was even allowed to use small traces of tactical finesse, like giving my jump infantry melters, you know, so they could actually fulfil more than one role on the battlefield. Oh, and all my berzerkers knew at all times that their dedicated transport was a pretty good bet when it came to getting them across the table in one piece. That was nice, too.

To tell you the truth, I am a little afraid that the new book will take that away from me again and instead create flavour by enforcing all kinds of restrictions. It’s also a valid strategy. It’s just not something that I find interesting or inspiring. I think a good book should let me play the army I like, not the one everyone thinks I should be playing.

New players: I really don’t want to hate on bandwagon players too much here, the more the merrier, I say. What I am really not looking forward to though are the countless articles about “totally radical, unbeatable lists that you really have to play, bro”, if that makes any sense. But there’s an easy remedy to that – don’t read the stuff in the first place ๐Ÿ˜‰

THE (POTENTIALLY) UGLY:

New fluff: I know, I know. How can new fluff be bad? It’s awesome to get cool new vignettes about our favourite armies and characters, right? I wholeheartedly agree to that! However, like with the rules, I am a little nervous that the fluff could not live up to the standard people tend to expect from Chaos. I am quite aware that it’s an enormous task to live up to the fans’ expectations, and there definitely is such a thing as an unpleasable fanbase, but here’s the thing: What I am wishing for with all my heart is the kind of well-written, evocative fluff that offers an overall outline but invites you to be creative and tell your own story in the context of the universe. A good example of what I mean is the fluff in the new Dark Eldar book. It gives a great and detailed overwiev of the Dark City and its inhabitants with their factions and feuds, but it also adds enough narrative leeway to make sure that basically any Kabal and faction you can conceivably come up with may be painlessly attached to the existing fluff. That’s the kind of fluff I love: It inspires you, gives you a good idea of the army and its characteristics, but it doesn’t prevent you from having your own ideas.

Whereas, for example, specifying all the names for every Sergeant and officer in a Space Marine Chapter (or company) is really very stupid, because you are telling people that there’s a definite version of the truth. Granted, it’s GW’s intellectual property in the first place, but it’s the fans’ creativity that made it what it is today.

So while I hope that the new fluff will be just as good as the new models, I don’t have high hopes on that front. After all, for me the best version of the Chaos Space Marine fluff is still that found in the 2nd edition Codex. And that was a looong time ago.

One last thing: If you’ve been reading this carefully, you might be able to hazard a guess as to which GW-author I would or would not prefer to write the new book. And while I really don’t want to participate in the relentless bashing of certain authors, some things are indeed just silly.

So, there you have it. That’s my two cents on the new Codex, whenever it may hit. I’d like to hear what you think! Let me know in the comments section!

As always, thanks for reading, everyone! Have a nice weekend and stay tuned for more!