Archive for chibi-knight

A Short Knight, pt. 3: The Grand Finale

Posted in 40k, Chaos, Conversions, paintjob, World Eaters with tags , , , , , , , , , , , , , , , , , , , on November 13, 2018 by krautscientist

Welcome everyone to the third and final part of my recent Chibi-Knight project! This has been such a fun little endeavour, and today you finally get to take a look at the finished model, so here goes:

The paintjob for the actual Knight was actually just about finished last time. So here’s where we left off:

This only really left the basing, but since the objective with this entire model was to match the bigger version as closely as possible, I wanted this ethos to extend to the base as well. So for starters, check out the base of the bigger version of Gilgamesh:

As you can see, I used some pieces from the Space Marine statue from the Honoured Imperium terrain kit to represent fallen Imperial monuments, and I really wanted to recreate that look — and it seemed that fate was very much on my side…

I actually realised a long time ago that the aforementioned statue seems to have been created mostly by upscaling existing Space Marine bitz: If you take a closer look, many of the parts of the statue seem to consist of bigger versions of plastic bitz from the company champion that comes as part of the old Space Marine command squad box (incidentally, I am pretty sure the statue’s cape is an upscaled chaos warrior cape, but that’s beside the point). And I actually discovered a while ago that GW used a face very similar – if not identical – to the statue’s face for different kits as well. So it didn’t take much work to collect the pieces that would allow for a very close recreation of my original design for the base. Take a look:

The shield on the left is pretty much the exact same shield also worn by the Honoured Imperium statue. It came from the aforementioned Space Marine command squad kit. The sword is from a plastic Terminator — I’ll admit the company champion’s sword would have been a better fit from a visual standpoint, but the Terminator sword worked better due to its size and proportions. And the head on the right is a piece of a broken Imperial monument from the WFB/AoS giant.

So I used these parts (or rather, copies of these parts) to create a setup that was fairly similar to the original base:

Now I had to improvise a bit, due to the bigger Knight’s base having an oval shape (and hence more room), but I think the setup worked out pretty well. I also chose to have the head in an upright pose this time around — something I should have done on the bigger base as well.

So here’s the base after undercoating…

…and with the Knight provisionally placed on top:

And here’s the finished base, painted to fit the bigger version:

So all that was left was to affix the new Chibi-Gilgamesh to his new home, and then the model was done. So here, once again, the big version for the sake of comparison:

And without further ado, I give you

Chibi-Gilgamesh version 2.0









I am actually really happy with the way the model has turned out. I may have had to compromise a bit here and there because a couple of visual touches from the bigger model just couldn’t be reproduced at the smaller scale (at least not without ending up looking extremely goofy, that is), but you can still tell at a glance that this is supposed to be Gilgamesh at a smaller scale, wouldn’t you agree?

And there’s also my favourite part about this project, the somewhat harebrained, yet ultimately successful, scheme of adding a fully sculpted interior and pilot to a Knight at the Adeptus Titanicus scale. Check out the bigger version of Baron Harrowthorne again:


And here’s the chibi-version:




And now that the new model has been finished, here’s another comparison shot with its predecessor:


As I’ve said before, I really like how the older Chibi-Knight seems to represent the somewhat clunkier vintage Epic 40k design, while the new model fits the sleeker, more faithful designs from the new Adeptus Titanicus.

That’s not quite all, though. Because with the model finished, it was of course time to trot out the actual 28mm Gilgamesh in order to find out how well the new Chibi-Knight stands up to the big guy.

well,…



I think there’s definitely quite a bit of family resemblance, wouldn’t you agree?

Having managed to closely recreate the base also makes me stupidly happy, to be honest 😉

So yeah, a fun project all around! And you know what? I am also going to pledge this little guy as part of Azazel’s Mechanical November ’18 community challenge — fits well enough, I’d say 😉

In any case, it goes without saying that I would love to hear any feedback you might have! And, as always, thanks for looking and stay tuned for more! 🙂

Advertisements

A Short Knight, pt. 2

Posted in 40k, Chaos, Conversions, paintjob, World Eaters with tags , , , , , , , , , , , , , , , , , , on November 10, 2018 by krautscientist

Hey everyone, here’s the next look at my current project, the recreation of my 28mm Renegade Knight Questoris, Gilgamesh, the Warrior King, at the Adeptus Titanicus scale. I haven’t had much hobby time since my update, but I’ve tried to make it count. So let’s take a look, shall we?

First of all, this is where we left off last time:

While the similarity between the Adeptus Titanicus Knight Questoris and its bigger 28mm version already astonished me during the building stages, the parallels even extended to the actual painting process: Due to the way the model comes together, it’s actually possible to keep most of the armour plates, especially the big top carapace and shoulder pads, separate from the Knight’s “skeleton” during painting, so it was once again a matter of undercoating the skeleton in silver and the armour plates in red, then work from there.

And since this was my biggest alteration to the stock model, I did of course have to start with the pilot, trying the best I could to have the paintjob make up for the lack of sculpted detail:


Even at this stage, I was already reasonably happy with the way the chibi-version of Baron Harrowthorne looked, so after that, it was mostly a matter of carefully blocking in all of the base colours. Due to the delicate sculpt of the Knight, this was a bit more fiddly than on, say, a bog standard Space Marine model, but it was still fairly quick work. Here’s Chibi Gilgamesh 2.0 with all the base colours and washes in place:

And now came the delightful part: I carefully tried to match as many visual cues from the bigger version as possible — including the decals used on the original Gilgamesh. In some cases, I was able to use smaller decals that were a close – or even perfect – fit, in other cases (on the kneepads, for instance), I had to use a fine liner instead.

But anyway, enough talk, let’s take a look at the mostly finished model:

Just to remind you, here’s the big version:

And here’s what I have right now:


Pretty close, wouldn’t you agree?

As for Baron Harrowthorne and the cockpit, I had to give the area another small round of tweaks, of course:

So, once again, let’s start with the bigger version:


And here’s the Chibi-Baron:

As I’ve said before, since there is so very little actual detail on the pilot, I’ve had to use the paintjob to suggest detail were none extists, and to create an evocation, for lack of a better word, of the much bigger, more detailed 28mm pilot. I am pretty happy with the outcome, though — if you take a closer look you can even see the glowing buttons on the control panel:

And here’s another comparison picture with my earlier Chibi-Knight kitbash:

So a few very minor tweaks notwithstanding, the new Chibi Knight is basically finished at this point — except for the basing, that is, and I do have a rather nifty plan for that. Let’s hope it works out!

Until then, however, I would love to hear what you think! And, as always, thanks for looking and stay tuned for more!

A Short Knight, pt. 1

Posted in 40k, Chaos, Conversions, World Eaters with tags , , , , , , , , , , , , , , , , on October 29, 2018 by krautscientist

Hey everyone, still no painted models this week, alas, but rather a small project that had me sidetracked. Small in every sense of the word, actually. So what is this about?

The recently released 2018 version of Adeptus Titanicus has left me weirdly indifferent so far — surprising, really, as I always thought I would be right at the front of the queue if it ever made a return. But the focus on the biggest Titans somehow makes it less interesting to me (even though I’ll readily acknowledge that being able to own multiple Warlords without having to sell a kidney is probably one of the main draws of the game).

That being said, when the AT-scaled Questoris Knights were released, I knew I had to pick up some of them. And at 25 Euros for three, they seemed reasonably priced, so I made the plunge:

What really surprised me was how the detail on these is truly off the charts: It’s almost uncanny how GW has managed to make them resemble the bigger version down to some of the smallest detail. And I found myself regularly having déjà-vu moments while building the first model — it’s that close to it’s bigger kin. And seeing how I was already having those déjà-vues, I started feeling the urge to build a smaller version of my Renegade Knight, Gilgamesh — in fact, some of you might still remember my previous attempt at building a “Chibi-Knight”, roughly at the Adeptus Titanicus scale – from all kinds of odds and ends:

 

 


Building that smaller version – dubbed “Chibi-Knight” by me – was a fun project back then, and I think the model still holds up fairly well, all things considered, even if it’s maybe a bit too clunky. But having a base model that was already a fairly perfect representation of an Imperial Knight from the get-go this time around really made me want to one-up my previous effort.

So I got to work, trying to make one of those small Adeptus Titanicus Knights resemble this guy as closely as possible:

And after a bit of messing around, my first WIP looked like this:

Pretty good already, wouldn’t you agree? Here’s a comparison of my first WIP next to the previous, kitbashed Chibi-Knight:

I actually like how the previous versions’s slightly weird proportions make it resemble the visual clunkiness and retro charm of the old Epic 40k models. By the same token – and due to the more delicate sculpt of the AT Knight – coming up with a way to mirror those chaotic decorations was slightly tricky, and had to drop some of the detail that was simply too small to reproduce – or would look weirdly clunky (such as using a Bloodletter face on the gun barrel, for instance). I also got the impression that most 28mm GW bitz are just a tad too big to use on those delicate AT Questoris Knights, so this did take some doing.

In the end, I went for the visual essence of the model, trying to hit enough design cues to make it work, dropping some that were just too much trouble to get right, and figuring out which bitz to use for either.

So here’s the basically finished build for Chibi-Gilgamesh version 2.0 that I have come up with:






All things considered, I think I have managed to come up with a pretty good reproduction of my 28mm Gilgamesh at the smaller scale. But that wasn’t even the end of the project, because during the conversion process, I found myself staring at the Knight’s hollow interior again and again…


…and wondering if maybe….just maybe…

…it would be possible to add a fully realised interior as well — just as I had done on 28mm Gilgamesh.

Sure, the mere concept is a bit ridiculous, but once I had gotten the idea into my head, I realised that there would be no way to weasel out of this challenge: Chibi-Gilgamesh 2.0 needed a cockpit!

Coming up with a pilot was the most challenging part of that, obviously: I thought I was already out of the woods when I remembered some 40+ years-ish old plastic Army Men style soldiers my uncle used to play with as a child, and wanted to use one of those, but they turned out to still be a tad too big. As was a pilot from one of my uncle’s old model planes:


My next idea was to use a Z-scale model train figure — and indeed, those come in all shapes and sizes, even in a sitting position. And they are also readily available online. In batches of one hundred, no less!

In the end, that would have included purchasing them in China, however, and it just didn’t seem sustainable to pick up something so cheap and minuscule from halfway across the planet. So I was already planning a visit to the local model train shop when another idea struck me: I remembered one of the old plastic Bretonnian Knights from an old WFB starter box having a stylised little person as their heraldic helmet crest — maybe at just the right scale?

When I dug out the bit from my cupboard of shame, I realised the figure was pretty much the right scale indeed — but alas, it was a Lady of the Lake style sculpt:

Space Marine helmet included for scale.

Very fitting for Bretonnians, no doubt, but not a particularly good match to recreate my Baron Harrowthorne model at a smaller scale. But maybe there was still something there that I could use? So I shaved off most of the detail from the helmet crest, until I was left with only the bare outline of the model, then tried to carve it into a rough incarnation of Gilgamesh’s pilot:

If nothing else, I was able to leave the suggestion of facial features in place. And I realised I had the beginnings of a pilot.

The cockpit, on the other hand, was almost trivially easy to build: I used some tech-y leftover bitz (from a Heldrake foot, IIRC) for the reactor section…


…and if you take a closer look, you’ll see that I even included a small control panel for the pilot:

So here’s another comparison shot for you: The 28mm version of the cockpit and pilot:


And my WIP version at the Adeptus Titanicus scale:

Of course I realised that the pilot was still looking slightly too primitive, so I added some tweaks to him, greenstuffing in the tiniest shoulder pads and placing some teeny tiny plastic nubs on the model to suggest both the medals on the bigger version’s chest as well as the cranial augmetic implants:

The rest of the detail will be suggested by the paintjob — at least that’s what I hope! Now in all fairness, the pilot is probably still a tad too big, but there’s just no way I can come up with an even smaller version, so I’ll call this conversion a success!

This has been such a fun little project — and given the size of the model, I hope it’ll be easy enough to paint up as well. Maybe this could even be the model to get me out of my recent painting slump? Keep your fingers crossed for me! 🙂

In any case, that’s it for today’s update. It should go without saying that I am looking forward to any feedback you might have. And, as always, thanks for looking and stay tuned for more! 🙂

The State of the Hunt — Week 50

Posted in 40k, Chaos, Conversions, paintjob, state of the hunt, World Eaters with tags , , , , , , , , , , , , , , , , , , , , , , , , on December 17, 2016 by krautscientist

Only a short update today, mostly because it has been one hell of a week, due to a ridiculously important deadline at work. Still, there are two news items I would like to share with you, so let’s take a look at the current State of the Hunt:

 

I. Return of the Chibi-Knight!

Some of you might remember that, back when I built and painted my Renegade Knight, Gilgamesh, I also included a roughly Epic 40k-scaled version of the same warmachine in the project as an added bit of fun. I dubbed it the “Chibi-Knight” back then:

Chibi-Knight Gilgamesh (1)

Now cobbling together a – pretty faithful – smaller version of the Knight was a very entertaining, if fairly involved, endeavour. But I didn’t really consider doing it again.

Enter fellow German hobbyist Helega, who helped me out with several really spectacular bitz drops this year. For instance, he provided the chain cape I used to replace the missing cape on my Forgeworld Angron. Anyway, Helega asked me whether I could build another Chibi-Knight for him, and while I knew this would mean some fiddly work, there was really no way I could turn down the request. So I tried to reverse-engineer my original kitbashing process and make another copy.

As an added twist, Helega wanted his Knight to be the loyalist version, so I had to account for that during the building process. There was also no way I would be able to cover up dodgy areas with spikes and baroque decorations this time around 😉

I started by putting together the same basic assembly I had used last time: CSM Raptor legs (chosen due to the separate feet, and because the lightning bolt decoration works both for chaos and for Great Crusade era Imperial machines, a Space Marine Terminator torso and a Dreadnought shin guard:

chibi-knight-mk-ii-1
chibi-knight-mk-ii-3
Instead of last time’s Raptor pauldrons, I ended up using some Chaos Marauder shoulder guards, and they arguably worked even better, making the torso look really familiar to that of GW’s stock Imperial Knight. I also found out that one of the ancient plastic chaos warriors’ helmets looks almost exactly like one of the face masks that come with the Knight kit.

So I knew I was on the right track, but this is where the fiddly work began: I painstakingly spliced together the Chibi-Knight’s feet using the hook bit from the CSMvehicle accessory sprue, and I once again tried to create weapon arms that were as close as possible to those of the 28mm version.

Helega told me he wanted the Knight to be armed with a gatling cannon and power fist, so I took a long hard look at the Imperial Knight Warden and worked from there:

28mm-imperial-knight-warden-1
And after a lot of messing around with various bitz, this is what I came up with:

chibi-knight-mk-ii-8
chibi-knight-mk-ii-10
chibi-knight-mk-ii-13
chibi-knight-mk-ii-14
chibi-knight-mk-ii-17
Here’s a side by side comparison showing the weapon arms of the big version and my “chibi-versions” of the same weapons:

Power Fist:

28mm-imperial-knight-warden-1
chibi-knight-mk-ii-9
Gatling Cannon:

28mm-imperial-knight-warden-2
chibi-knight-mk-ii-11
Not a 100% perfect match, maybe, but certainly reasonable enough, given the difference in scale! 😉

So here’s what I packed up and sent to Helega:

chibi-knight-mk-ii-7
As you can see, I have left the part in several sub-assemblies. This should make for easier painting, plus it’ll also allow Helega to tweak the pose according to his wishes. I have also included an alternate head and a bit that could serve as the carapace-mounted missile launcher.

So yeah, another Chibi-Knight finished! Here he is, next to Chibi-Gilgamesh:

chibi-knight-mk-ii-18
The new version is arguably even slightly more elegant a conversion than my first attempt in several respects 😉

Anyway, I am really happy with the finished conversion, if I do say so myself, and I hope Helega will be happy as well! As far as I know, the Knight will be painted in either Death Guard or Dusk Raiders colours, and I am really looking forward to seeing the finished model!

chibi-knight-mk-ii-15

 II. Getting to the finish line — but only just barely…

In other news, I am happy to report that I did manage to finish my vow for the Call of Chaos event over at The Bolter & Chainsword — even if it didn’t look like I would be successful for the longest time.

Earlier this week, I found myself with two models yet to finish for the vow and virtually no painting time to dedicate to the task. So I was basically prepared to call the endeavour a lost cause when a last minute pep-talk from fellow hobbyist Augustus b’Raass brought me back on track.

So I basically put in every waking hour of leisure time I had this Tuesday and completed the last models for my vow — at 2.30 in the morning 😉

Anyway, here’s a look at all the completed models:

finished-call-2016-10
Rest assured that we’ll be taking a closer look at these guys pretty soon. And starting next week, it’s also time for the annual Eternal Hunt Awards, I believe… 😉

But that’ll have to wait for a couple of days. For now, let me know what you think! And, as always, thanks for looking and stay tuned for more!

The Warrior King Reloaded — one last look…

Posted in 40k, Chaos, Conversions, Fluff, paintjob, World Eaters with tags , , , , , , , , , , , , , , , , , , , , , on November 4, 2015 by krautscientist

At the risk of boring you all to tears, today I would like to take one last look at what is probably my big hobby project of 2015: my customised Chaos Knight Titan. Don’t fret, though: There’s actually still something new left to say about the model, so you won’t merely have to look at the same pictures yet again 😉

In fact, with a project of this size, it’s probably not even a surprise that I ended up with some loose ends to tie up, even after finishing the model proper. So here’s a couple of small concerns left to address:

 

I. It’s getting hot in here…

The first thing I still wanted to do was to paint the alternate weapons option for the model. Even though I only purchased the original (2014) version of the Imperial Knight kit, that still provided me with two different long range weapons. And why I clearly favour one of them from a visual standpoint, I still  left the gun barrels exchangeable, so all I needed to do was to get some paint on the Thermal Cannon muzzle in order to make my Knight useable as either a Paladin or Errant. Take a look:

Chaos Knight Gilgamesh, the Warrior King (39)
Chaos Knight Gilgamesh, the Warrior King (34)
Chaos Knight Gilgamesh, the Warrior King (33)
To be fair, though, it’s a fairly lazy version of this particular conversion, because it doesn’t extend to the tanks on the side of the weapons and is limited to the actual barrel of the gun:

Chaos Knight Gilgamesh, the Warrior King (36)
While I did want to have the extra option, I far prefer the long-barrelled weapon, and it’s also very much a visual part of my Chaos Knight, so I went the easy route for once. I did some minor conversion work, however, in order to bring the look of the thermal cannon in line with the warlike, spiky look of the rest of the model — and that juggernaut armour plate makes for an instant Khornate look, wouldn’t you agree?

Chaos Knight Gilgamesh, the Warrior King (38)
Nothing’s really magnetised (yet): The long-barrelled weapon is neatly kept in place by the model’s construction while the Thermal Cannon has to be helped along with a bit of modeling putty. I’ve already put the structure for magnetisation in place, however, so all that’s left to add are some actual magnets — I suppose I’ll be getting there at some point 😉

 

II. Stories of the Warrior King

It should come as no surprise that a monstrous warmachine like Gilgamesh has a lot of history behind it — ten millennia of service alongside Khorne’s Eternal Hunt will do that. What did come as a surprise, though, is that I didn’t even need to come up with all of the background material myself: While the model was still very much WIP, fellow hobbyist and blogger Inqmikaelovich sent me a rather excellent little story vignette kindly starring Gilgamesh in a support role. Allow me to share it with you:

 

Freeze frame.

A well trimmed grey beard fills the picture. It covers scars; errata in its patterns tell stories of hundreds of years of combat. It is about an inch and a half long and is the color of a cloudy sky.

Scroll up.

Between the beard and a similar mustache lies a mouth. It is smiling, a smile devoid of tension or stress. It is the smile of a man who has seen his fate, and, despite how dark a fate it is, finds peace in knowing it. With all uncertainty removed, his path is now clear.

Scroll up.

Above the mouth is a nose. It is perfect for the man’s face; neither too long nor too short, not too wide nor too thin. It is a noble nose, betraying a sense of humanity and sophistication.

Zoom out.

The full face is in the picture now. It is completed by well groomed hair and eyebrows, the same color as the beard. The man’s eyes are devoid of any emotion save peace of mind. They are a stormy blue, and seem too kind to belong with the war scarred beard.

Zoom out. Resume play at one thousandth speed.

The man is in a chair, hands gripping controls and the eyes fixed on an archaic HUD. An intimidating, impossibly loud roar fills the small chamber, and yet he does not flinch. There is now a sense of motion, as if he were falling forward, the tip of the beard lifting from his chest.

Zoom out. Pan 90 degrees left.

The function of the controls is now obvious; the last remaining suit of Knight Titan armour of House Tetsonar fills the frame. It is coated in black camouflage and Kill Markings, and is charging. An immense power sword, underslung on a massive mechanical fist, is swinging forward, and a deafening scream matches the roar as a massive plasma cannon powers to life.

Zoom out.

The roar’s source is now visible; an opposing Knight is counter-charging. The titanic duel fills the frame. It is painted red and brass, and dozens of bloody handprints adorn its adamantine greaves. Spiked chains are dangling from its form and its right arm that ends in an enormous cannon, its muzzle wrought in the shape of a snarling daemon. The other arm bears a chainblade of impossible proportions, hefting it above the machine’s head; it is the source of half the roar. The other half issues from the machine itself. In the distance, Imperial Aircraft are exiting a massive fortress, the last lifting off as the Knights are in mid-charge. The thousands of red and brass infantry at the giants’ feet turn, knowing their quarry gone, to the last Imperial Warrior standing – the Knight.

Pan 180 degrees right.

Our hero is bringing his blade around for a killing strike, one that will skewer his opponent, but it misses its mark. The enemy’s chainsword is swinging downward, ready to smash the hallowed Knight’s armour in. The last Valkyrie clears the walls of the fortress and begins to exit the atmosphere.

Resume at full speed.

As the Loyal Knight’s sword harmlessly scrapes yet another deep groove into the baroque armour of the Chaos Knight, the latter’s chainblade crashes down with irresistible force. The curved carapace of the Tetsonar Knight caves in, metal screeching on metal. A golden aura surrounds the god machine – a teleport is imminent. The archenemy titan rears its head and roars all the louder, angry at its prey being so cruelly snatched from its grasp.

A new scene, a massive hangar bay in orbit.

The last Valkyrie is docking a hangar over. Our hero appears, but all is not well – the giant crumples to the floor. Medical personnel and Tech Adepts swarm the titan, and the pilot is recovered. His smile still perseveres, but his eyes are closed. His beard is equal parts red and grey now, the crimson flecks telling one last tale. A tale of a stand, a tale of a fall.

A year has passed.

The Knight stands tall once more, its armoured form restored, new heraldic colours proud
and flawless: resplendent and rechristened, armed with new and far more fearsome weaponry, it’s original weapons joined by a fearsome shoulder mounted titankiller array, and a new name on it’s hallowed heraldic shield – Mercy’s Revenge. Before it stands an Inquisitor, an honoured servant of the God Emperor, with a servo-skull hovering above his shoulder. There is something familiar in the curve of its features, the geometry of its brow. The skull hovers silently, devoid of flesh and life, but ready to serve evermore. A younger man stands next to the Inquisitor, silent in contemplation.The Inquisitor’s voice is hardly a whisper.

“She is your ward now, my boy.”

 

Very cool, eh? It goes without saying that not only was I really flattered by this but I also wanted to reply in kind. So here’s another small story for you, depicting the same event, albeit from a different point of view. For some extra fun, I tried to stay fairly true to Inqmikaelovich’s piece and mimic the narrative structure rather closely. Check it out:

Baron Harrowthorne try04bFreeze frame.

A face fills the picture, half-lit from below, its sharp features hawkish, yet noble. The face of a military man, of a warrior, born and bred. A proud face, yet the set of its features  speaks not of haughty arrogance, but of a pride well deserved. The scars of many battles can be glimpsed in the half-gloom, lending the owner of the face an aspect of martyrdom. Hints of juvenat treatments are visible, but subtly so. This rejuvenation has not been applied for vanity, but for preservation. The eyes are closed, as if in deep contemplation.

Resume at one tenth speed.

The man’s eyes open, and everything is changed. Like words gaining an entirely different meaning in a different context, the face, too, is re-contextualised, yet in the most sinister way: These are eyes that have seen too much and gone too far. There is old pain there, and old hatred. And a cold fury that is truly chilling to behold. The corners of the man’s mouth turn down into a frown that is somehow more intimidating than any grimace of rage could be.

Zoom out.

The man is seated in a throne, surrounded by controls and arcane auspex arrays. The interior of a gunmetal cockpit trimmed  in brass. The cockpit of a warmachine, a Knight Titan. The pilot’s pose is relaxed, but not without focus. His economy of motion betrays an amount of experience and unity with his machine that is uncanny.

Zoom out. Pan 90 degrees right.

The pilot’s suit of Knight armour is now visible, and it is truly terrible to behold:  armoured in arterial red and darkened bronze, its form bedecked in spikes and chains, a walking altar to the War God.

The machine is known by many names: the Crimson Noble. The Warrior King.  The Twice-Consecrated.
Gilgamesh.
It is feared across the galaxy, and rightly so.

Like any Knight, it flies its honours proudly, its many marks of distinction. Yet their meaning is lost to Imperial history, with those who would understand their significance either mortal enemies of the Imperium of Man or long in the ground. They tell a tale, however, these marks and seals. As do the dozens of bloody handprints adorning the Knight’s adamantine greaves, placed there as an oath of moment by the legionaries of the Hunt.

Zoom out.

The Knight’s quarry comes into view now: A black-armoured loyalist Knight, covered in battle honours and kill markings that, likewise, speak of an eternity of war and honour. None of this matters, though, save for the icons of subservience to the Throne of Lies. They cancel out all honour. They are the reason the machine and his pilot have to be brought down
Gilgamesh’s war horn blares with the sound of a bellowing Titan of legend as he stands ready to face his foe. The loyalist Knight pulls back for a blow with its massive chain fist. A killing blow, this…

Resume at full speed.

…but sloppy, way too sloppy. The underslung chainblade merely scrapes yet another inconsequential groove into Gilgamesh’s armour, nothing but a minor concern for the Sacristans maintaining the giant warmachine. Yet the blow has unbalanced the loyalist Knight, and there’s nothing it can do to stop the massive reaper chainsword descending on its carapace with terrible force, caving in the curved armour plates and creating a torrent of sparks as metal screeches on metal. But then, a golden glow surrounds the maimed loyalist machine: A teleport device, a priceless treasure hidden within the ancient carapace. A final trump card. An escape. Man and machine roar as one, enraged at their denied kill. As the golden flash of light dies, only blackened pieces of scrap metal remain, sheared off by an imperfect teleportation. The enemy, however, is gone.

Within the half-light of his cockpit, Baron Augustus Melchiah Harrowthorne reclines, the pulse of adrenaline slowly abating, just like the machine spirit’s wrath. The anger is still there, however, like smouldering embers, ready to be fanned into a blazing flame yet anew, when the time comes. There will be other battles. The Long War is not over.

And neither is the Hunt.

 

III. Bwood for the Bwood God!

Another pretty major loose end regarding my Chaos Knight is the fun little gaiden project born from the model: I am talking about the “Chibi-Knight”, of course 😉

Chibi-Knight WIP (19)

This model was basically created on a whim, after I had discovered fellow hobbyist Paule’s very cool thread full of kitbashed Epic Titans. Now I don’t even have any fond memories of Epic 40k myself, as 40k proper always seemed more interesting to me. But here’s the thing: If GW ever were to release a Titan-based boxed game at the Epic scale or a redesigned Adeptus Titanicus, I guess I’d be first in line for picking it up. I love the concepts and designs behind Titans, but I cannot see myself ever putting together one of those massive resin models from Forgeworld. But a roughly Epic-scaled Titan game would be excellent for scratching that itch without having to saw through all that resin (as well as having to sell a kidney to be able to afford it all) 😉

Anyway, the Chibi-Knight turned out to be an unexpectedly enjoyable little hobby project, as I found myself digging through the old bitzbox in an attempt to match the model’s bigger cousin as closely as possible — within reason, of course.

I did have to make some compromises, as not every part of the model would have been easy enough to recreate at a smaller scale — and some elements simply wouldn’t have worked. But in the end, I used parts from about twenty different GW kits to make a model that I believe is a fairly close re-imagining of its bigger cousin. And it goes without saying that I also tried to mimic the bigger model’s paintjob as closely as possible on the Chibi-Knight.

So without further ado, let’s compare the two finished models, shall we?

Chaos Knight Gilgamesh in two scales (1)

Chaos Knight Gilgamesh in two scales (3)
Chaos Knight Gilgamesh in two scales (4)
Chibi-Knight Gilgamesh (1)
So, let’s take a closer look at the Chibi-Knight all by itself (I’ve arranged the pictures just like those of the bigger version of Gilgamesh in the respective post, so if you want a real side by side comparison, feel free to check out those pictures as well):

Chibi-Knight Gilgamesh (4)
Chibi-Knight Gilgamesh (5)
Chibi-Knight Gilgamesh (6)
Chibi-Knight Gilgamesh (7)
Chibi-Knight Gilgamesh (8)
Chibi-Knight Gilgamesh (9)
Chibi-Knight Gilgamesh (10)
All in all, I think it’s a fairly close fit. However, I did have to make some small allowances due to the differences in scale: The legs and feet are a bit different, for one, although they were still quite a bit of work: As you can see, I used a pair of Raptor legs as the base, but then I cut off the feet and tried to make something as close as possible to the original Knight’s feet. A cookie goes to whoever guesses what the toes originally started out as 😉

I also made some concessions when building the torso: The carapace doesn’t quite look like the original, but it’s still close enough to be recognisable, I believe — as I have learned from the great Ron Saikowski, the most important part of a conversion like this is to get enough parts right that the elements that aren’t quite perfect will still work in the context of the whole model. So let’s take a closer look at the parts that did up looking rather close to the bigger version of the model:

One thing I am really happy with is the smaller version of the daemonic breastplate — it was really fortunate that the warshrine of chaos kit basically contained two very similar daemonic faces at wildly different scales 😉Chibi-Knight Gilgamesh (13)
Oh, and I definitely had to replicate the heraldic plate with the World Eaters legion badge on it, of course, (even if working with those FW decals almost drove me up the wall yet again=.

I also tried to closely recreate the designs on the pauldrons: The right one still has a World Eaters legion badge (albeit of a slightly different design), as well as a hint of the legion and company markings underneath:

Chibi-Knight Gilgamesh (12)
While the right was done using some bitz for a pretty close recreation of the bigger version:

Chibi-Knight Gilgamesh (14)
There is another World Eaters symbol on the leg banner, thanks to one of the really tiny decals from FW’s World Eaters decal sheet:

Chibi-Knight Gilgamesh (16)
And I even managed to squeeze in a smaller version of the battle honours on the rear side of the banner as well:

Chibi-Knight Gilgamesh (15)
One element that is slightly different from the original model is the base: It still features fallen Space Marine statuary, but instead of a crumbled statue, I decided to use the one legitimate Epic 40k model actually in my possession (kindly provided, once again, by Drone21c) and paint it up as a heavily verdigrised statue:

Chibi-Knight Gilgamesh (11)
I rather like this element, and it provides a hint as to the model’s actual scale. Plus when it came to building the bigger Knight’s base, this little statue was the most important influence that actually inspired me to use the Space Marine statue from the Honoured Imperium kit in the first place!

So yeah, that’s the little guy. I am really rather stupidly happy with the model, to tell you the truth, even if there’s not even a real use for it 😉

Chibi-Knight Gilgamesh (2)

 

IV. A bit of advice…

So, after spending so much time with my Knight(s), I thought I’d wind up this post by giving out some advice to those of you who might be contemplating an Imperial Knight project of their own — you should definitely go for it, by the way: It’s a fantastic kit, and working with it has been lots and lots of fun. Here are some small pointers to set you on your way!

Don’t be afraid!
I know I was really apprehensive about the whole idea of tackling such a big model at the start, and maybe so are you. Don’t be! Like I said, it’s a terrific kit, and it’s also perfectly explained and goes together like a dream. The model also breaks up rather beautifully into several sub-assemblies which is excellent both for the building and painting phase. And building and painting a Knight is an excellent, self-contained hobby project that will really be worth your while. So if you are at all interested in the Knights and their look and backstory, go for it!

Do some research!
At the same time, this is not a kit to be slapped together hastily for the game next week: Before you even start, you might want to do some research online to see Knights that might inspire you and to figure out what things you do and don’t like. Hobbyists online have been doing fantastic jobs with their own Knights, and the inspiration ranges from complete, brilliant models to small but essential tips for creating certain effects, assembling some fiddly parts or what have you. I myself have a folder of about 1 Gigabyte of Knight-related pictures, and that material has helped me so much with my own model. In fact, I am still collecting pictures for my inspirations folder, even though my Knight is already finished 😉

You should really add a cockpit and pilot to your model!
One of the most important things about Knights is how individual they are. But that amount of individuality doesn’t stop at the machine itself: What better way to customise your model than to add your own Cockpit and pilot as well — in fact, coming up with a pilot to match your Knight is not only fun, but also really rewarding, while just gluing that torso shut seems like a huge missed opportunity. So take my word for it: Build a cockpit and pilot! It will take some doing, but there are many cool examples out there, and few things made me feel as accomplished about my own Knight than this part!

Take your time!
This should go for all hobby projects, but it’s especially important here: You can only really mess up by being too fast and getting sloppy. But this huge, beautiful model deserves your attention, so TAKE YOUR TIME! Seriously, this is key! 🙂

The devil is in the details!
Again, this also applies to hobby projects in general, but there are so many details you can add to make your Knight even cooler. Take a page out of JeffTibbetts’ crazy perfectionism! It’ll teach you a whole new way of looking at the model, and suddenly adding more and more detail won’t be a chore anymore, it’ll be fun! Small things really go a long way, especially on such a big model!

Careful with the glue!
Don’t glue everything together right away, because you’ll make your life much harder. Instead, think about which portions of the Knight should be kept apart for the moment — or, indeed, altogether: For istance: Keep the armour plates and “skeleton” separate while painting, because this will make your life much easier. If you’re planning on adding a cockpit, make sure to keep one side of the torso unglued, for easier access to the Knight’s interior. Oh, and the top carapace will snap into place without any glue (and can be taken off later that way), so think before you break out the glue.

Build a Chibi-version!
Seriously, though, this isn’t a must. But I had so much fun with my own Chibi-Knight that I can only recommend you build one yourself 😉

 


V. In closing…

I almost forgot mentioning a very nice observation that fellow hobbyist Freytag93 brought up over on Dakka:

Also, I like the statue on the base. To me, the face echos the face of the baron (probably cause of the shared scar), giving a contrast to his fallen honor.

While the effect is completely coincidental, I really love this! Isn’t it great when people discover something about your models that you didn’t even put there in the first place — at least not consciously?

 

So anyway, that’s all folks. I hope you enjoyed yet another look at this project! It goes without saying that I’d love to hear any feedback you might have!

And, as always, thanks for looking and stay tuned for more!

Chaos Knight Gilgamesh in two scales (2)