Archive for bike

A Child for the Warrior King, pt.6 — and a small interlude

Posted in 40k, Chaos, Conversions, WIP, World Eaters with tags , , , , , , , , , , , , , , , , , , , , , , , , , , , on October 15, 2018 by krautscientist

My hobby work has not been all that exciting recently: The combination of a decided lack of feedback here on the blog and a prolongued downtime over at The Bolter & Chainsword has worked as a bit of a dampener to my hobby motivation. But I have a new update to share with you all, dealing with my second converted Armiger once again. And as a special treat, I’ll also sneak in a small bonus-review somewhere along the way, so keep your eyes peeled 😉

But first things first: My second Renegade Armiger was already mostly finished in my previous post, but it still needed that final bit of attention, especially when it came to finishing the chaotic decoration: The most important part was to add spikes and skull trophies to the top carapace. At the same time, I also grafted some small teeth, carefully shaved off the little vanes that come with the CSM Raptors, to the pauldrons and leg armour, for that certain chaotic je ne sais quoi.

So here’s the result:


Those added elements really do a pretty great job of pulling all of the parts of the model together from a visual standpoint, plus they also serve as a parallel to my other Armiger Warglaive.

So the model is basically ready for paint now. Take a look:


Oh, and after adding the final layer of detailing, I also straightened out the cockpit and pilot, making a few final tweaks and additons here and there. So here’s the completed build for the Huntress inside her cockpit:


As you can see, the way the Huntress controls the machine actually matches the setup I used for the first Armiger. This time around, however, I actually made sure to make the alignment of the machine’s head match that of the pilot (it’s only a small thing, but since I used the standard Armiger head this time around, at least beneath the extra bitz, it was easy enough to keep the head poseable):


I am actually really happy with the conversion, plus I think the two Armiger really work rather well together. Several people on the forum pointed out how the machines seemes like two pack mates, ready to bring an opposing Knight (or even Titan?!) down, and how the new Armiger actually seemed a touch more feral than the first model. Since that’s the impression I was really going for, I am rather happy to have achieved that dynamic with the two models:

Incidentally, I also made a small tweak to the Hound, adding some Blood Warrior decorations to his pauldrons. See if you can spot them in the picture above 😉

 

Bonus review: Canis Rex

So, while we are on the subject of (Imperial) Knights, allow me to sneak in some thoughts on one of GW’s fairly recent releases thtat I have wanted to share for a while: I am talking about Canis Rex here:

The release of Canis Rex was interesting for a number of reasons: It marks the third revision of the Imperial Knight kit in almost as many years, for one: Each subsequent release has added new parts and options, and this latest kit is no exception, providing us with all the weapon options released so far, along with a new weapon, the las-impulsor, that can be used to assemble the model as a Knight-Preceptor. So far, so good. At the same time, Canis Rex is also a veritable named character, so the model comes with original parts to turn a generic Knight into Canis Rex with its unique heraldry. Last but not least, there’s also the fact that the kit provides us with the bitz for a fully designed cockpit – something that the GW-Knights have lacked so far – and for the pilot, Sir Hekhtur the Chainbreaker.

Now my love for the Imperial Knight per se is well documented, and I still consider the model a landmark release and one of GW’s finest modern kits. All the original kit’s strenghts remain, obviously, and we actually get some new toys to play around with. So let us take a closer look:

Let’s start with the new weapon: Where most of the Knight weapons we have seen so far have a rather more brutal, archaic look, this new gun hews closer to a more experimental, “Martian Deathray” look, which is nice. On a related note, looking at the silhouette of the weapon, I cannot help but realise how you could probably kitbash a similar weapon using the side panels from a 40k life pod (from either the 40k objectives kit or the new Kill Team: Rogue Trader boxed set), if you need the weapon but don’t want to buy the new kit.
Whether or not you like the las-impulsor, though: The kit also seems to contain every other Knight weapon released so far, so the world is really your oyster here.

When it comes to Canis Rex’s unique armour plates (and heraldic elements), those bitz are nice, if a bit vanilla: The facemask strikes me as ever so slightly too generically medieval, but that’s purely a matter of personal choice. On the other hand, the combination of a wolf/dog head and a chain on the tilt plate and banner make me wonder whether those bitz might be useful in a 30k World Eaters/War Hounds project…

What I really like about the inclusion of those bitz is how GW actually embraces the idea of having those Knights be true individuals — something that has always played a big role in the background, but it’s still nice to actually see that philosophy now realised in model form. If anything, coming up with your own background, heraldry and backstory for your noble is something to be encouraged.

So far, the additions to the kit are nice but not exactly massively exciting.This all changes with the third big addition to the kit, however, and easily the biggest draw of the model, if you ask me: The inclusion of both a fully detailed cockpit and a pilot:


Seeing how the nobles piloting the Knights were already being played up as important and powerful individuals in the background, I actually find it baffling that it has taken GW so long to represent them in model form. If anything, I feel Imperial Knights should have been themed around their pilots from the get-go. But anyway, now we finally get our pilot model, and both in a walking and a sitting form, which is nice:


I like how the model’s armour/pilot suit neatly straddles the line between baroque(medieval and functional — it arguably works better with the general 40k aesthetics than Forgeworld’s almost too sleek and futuristic looking Knight pilot. At the same time, it’s also nice how some design elements (see the arrows on the armour plates, for instance) are shared between the Knight and its pilot.

Now while the pilot is supposed to be Sir Hekhtur the Chainbreaker, it’s easy to see how a simple headswap would be enough to turn him into an original (male) knight pilot. Creating a female noble from those bitz would still be possible, albeit with a bit more conversion work — and maybe the inclusion of some of the slightly narrower Genestealer Hybrid body parts.

When it comes to the actual cockpit, I really love how GW’s sculptors have managed to squeeze lots and lots of detail into a pretty tight area (believe me, I know): The design looks great and channels visual cues from both Forgeworld’s Knights and various Titans:

If I have one criticism, it’s that I think the controls are almost a bit too modern and “Space Marine-y” and should maybe have looked a bit more archaic – like the kind of tech you see in Forgeworld’s Titan cockpits – but the design still works very well, and the option to build it so it can even be looked at with the top carapace closed and the hatch open is an awesome little touch:

 

For me, and other hobbyists as weird as me, coming up with a way of building the interior of a Knight has been one of the most interesting parts of working with the model. So seeing an “official”, readymade version now is a slightly bittersweet moment: On the one hand, it’s great that GW has finally stepped up and provided us with the building blocks for a Knight interior. At the same time, however, this also takes away some of the adventure, for lack of a better word, and challenge of scratchbuilding and kitbashing an area like this — oh well, at least we still have the Armiger interiors to think about 😉

On a related note, and if you’ll excuse a bit of boasting, I have to say that I am really rather happy with the way I managed to come up with something pretty similar to GW’s “official” look for the pilot and cockpit years ago, back when I built my own Knight:



So for those who do not own any Imperial Knights yet, you guys are in luck: You are now able to pick up the definitive version of an already fantastic kit and end up with lots and lots of beautiful options to play around with. If, like me, you were among the early adopters of the Imperial Knight, you might be forgiven for feeling a bit left out (and for being expected to buy yet another 100+ Euros kit). The third revision of the kit in as many years. Because much as I like this newest revision to the kit (and much as I liked the previous revision), I cannot help asking myself whether those weapon options and cockpit bitz could have been part of the model from the beginning — the pilot and cockpit, in particular, seem like parts of the sculpt that must have been considered from the beginning…

 

Call of Chaos 2018:

Before I wind up this post, let me quickly address the current Call of Chaos event over at The Bolter & Chainsword: With the forum back up and running, fortunately enough, I think I’ll just have a go at joining in the event again this year. Here are the models I think I’ll be pledging as my Call of Chaos vow:


Including the second Armiger is a bit of a no-brainer, obviously, as I really want to have the happy family finished before the year is out 😉 In addition, I want to get some paint on two Nurglite characters that have been sitting on my desk for ages:

First up, a Nurglite Lord on bike that was built over a year ago (originally for another forum painting event last year):

Still pretty happy with this guy — you certainly wouldn’t think he started out as a Ravenwing biker from Dark Vengeance, would you? 😉

And there’s this conversion of Maxime Pastourel’s Lord of Contagion model from the Dark Imperium boxed set:

his guy should be fun to paint, with all the gribbly areas of distressed skin and gooey intestines 😉

 

So anyway, that’s it for today’s update. It goes without saying that I would love to hear any feedback you might have! And, as always, thanks for looking and stay tuned for more! 🙂

Advertisements

The State of the Hunt, Week 31/2017: The Nurgle train has no brakes…

Posted in 40k, Chaos, Conversions, paintjob, state of the hunt, WIP with tags , , , , , , , , , , , , , , on August 1, 2017 by krautscientist

After the fairly copious amount of praise I had for the new Death Guard models last week, it probably won’t be too much of a surprise that I am still happily cutting my way through the chaotic part of the Dark Imperium boxed set at the moment. So a closer look at the Primaris Marines – along with some of their implications for the 40k setting – will have to wait for a bit, while I share a couple of projects I am currently working on. It’s probably for the best, however, as we are currently seeing even more Primaris kits being released, and I would very much like to take those into account as well. Well, that and doing Nurgle kitbashes is just too much fun at the moment 😉

Speaking of which:

I. The kitbashing continues

I am slowly working my way through the Dark Imperium Death Guard models BubblesMcBub sent me, mostly focusing on the Plague Marines for now. There’s not too much to see there, however: I already said in my earlier post that I doubt I’ll be changing too much about them, as I am simply a huge fan of Maxime Pastourel’s sculpts on these guys! So my work on them is mostly limited to taking of a detail here and there to ever so slightly reduce the clutter. It goes without saying, however, that this has the added benefit of giving me some extra bitz to sprinkle among the rest of my conversions 😉

The one exception is the Plague Champion, because I am really not a fan of his molten face and have wanted to replace it ever since I first saw the model. After giving it a bit of thought, the solution I came up with was to make a press mold of the very same mummified head that’s dangling from the champion’s backpack by a chain, and carefully work it into the cowl the model wears. I’ve also slightly touched up the breathing tube that originally formed most of the model’s face, making it look like several tubes and hoses are feeding into his head now, and have maybe even been sewn to his face. Eww…

Anyway, here’s the model:


In all fairness, the new face is just as disfigured as the old one, but I still prefer it because you can actually make out at least some of the features — plus it actually uses a face sculpted by Morbäck as well now, so there’s that too 😉 To be honest, I’ll probably have to paint the model before I know whether or not it was all worth it, but oh well 😉

In the meantime, I have also managed to get my hands on the three “easy to build” snapfit Plague Marines and just had to start working on them as well. Let me tell you though, these should carry a “hard to convert”  label, at least if you are trying to do something a bit more involved: I felt acutely reminded of the rigid monopose Plague Marines of the early 90s. But they probably weren’t designed to be cut apart in the first place, so the fault is entirely mine — there must be something wrong with me, actually doing most of the conversion work on models that weren’t envisioned as conversion fodder to begin with…

Anyway, my plan was to actually convert a second Blight Launcher Marine, in addition to the one that comes with the kit anyway, and I already showed you the converted Blight Launcher in my last post:

So I grafted it onto the champion from the easy to build kit and made a couple of additional tweaks. Here’s the mostly finished model:


But boy did the model fight me every step of the way: The stock pose is just so weird, and I ended up carefully sawing off the entire upper body in order to tweak it a bit. As you can see, I have also slightly redesigned the blight launcher, splicing in the upper section of a Sternguard heavy flamer to bring it even closer to the “official” design. I also added some tiny strips of chainmail, thanks to a very helpful suggestion by fellow hobbyist Aasfresser, in order to make the right arm and shoulder match the design on the other side:


The backpack with the plasma gun is just a placeholder, of course, as a blight launcher and plasma weapon on the same model would be a bit too much 😉

As for the actual Blight Launcher wielding Plague Marine, he has been tacked together for now. The one change I made was to his faceplate, as I didn’t really like the way the tube directly fed into his helmet, so I spliced in a rebreather:


So here are the two tweaked snapfit Plague Marines:


While I was at it, I also slapped the very creepy leftover power fist on my Blightbringer-based Plague Champion:

II. A recipe for rot

Now I have used several recipes for followers of Nurgle over the years, but none of those really ended up coming together precisely the way I wanted to. For instance, while I am pretty happy with the overall look and feel of my squad of retro Plague Marines,…


…the recipe was not quite what I wanted to use for the new batch of models. So some experimentation was in order.

So for my first test model, I used an undercoat of GW Mournfang Brown spraypaint (which performed quite well):


For the actual paintjob, I ended up giving a paint splatter recipe from one of the recent issues of White Dwarf a try — with a couple of small tweaks.  Here’s how my first test model turned out:




Pretty cool, but not quite there yet, either. The green, for instance, was a bit darker than I had planned — mostly on account of my choosing the wrong shade for it, to be fair.

So I painted another test model, and I think I got it right this time around:



Now we’re talking! This is actually very close to what I have wanted my Plague Marines to look like for ages, and the green on the armour is just right! I ended up with the following steps for the armour plates:

  • basecoat with GW Deathworld Forest
  • wash with GW Ogryn Flesh (or, failing that, Reikland Fleshshade)
  • highlight with GW Ogryn Camo
  • DONE!

As for the skin, I went with one of my tried and true recipes for distressed skin, based on a basecoat of GW Rakarth Flesh with a healthy wash of GW Ogryn Flesh followed by a slightly more focused use of GW Druchii Violet and GW Carroburg Crimson on top.

So out of all the various recipes I’ve tried for followers of Nurgle over the years, this one is really my favourite so far:


So expect to see more of this approach as this project takes shape! 😉

 

III. The Blight That Rides

Last, but definitely not least, I’ve been challenged by BubblesMcBub, whom I met at the Amsterdam GW store and who was nice enough to provide me with all of the Nurglite goodness, to build a mounted character in a mutual challenge for the August Arena 2017 over at the Bolter & Chainsword — an event, I must add, by none other than my mate Augustus b’Raass, in a funny twist of fate. Now I have to be honest: At first I hated the idea of having to build a mounted character, but after giving it a bit of thought, and seeing how I am on a bit of a Nurgle trip at the moment, I thought it might be fun to build a Nurglite Chaos Lord on a bike. So I made a first, very early mockup:


The idea here was to build the model entirely from leftovers from my bitzbox, so I grabbed an old Deathwing bike from the Dark Vengeance box and a couple of Chosen and Blightking bitz. In fact, I pretty much stuck to the recipe I used for my kitbashed Plague Marines a short while ago, just with a bike thrown into the mix.

Fairly happy with the early mockup, I started to build the model in earnest, replacing the crude poster tac mockup with actual GS: I greenstuffed in a hideous, fat belly in order to blend the lower and upper parts of the body together — and, of course, to make the model look suitably Nurglite. I also added some rolls of fat around the neck and below the helmet. And the Chosen axe was changed to a Plague Sword.  I also started transforming the bike into something far less loyalist. Here’s what I ended up with:


I actually love the way his fat belly is wedged behind the bike’s fuel tank/midsection 😉


An array of tanks and pipes was added to the back of the bike, with its various tubes and pipes feeding both into the bike itself and into the Lord on top of it: I love the idea that a) he probably isn’t even able to get off that bike anymore and b) there’s some vital fluid in that tank that gets pumped into both the bike and the rider, effectively turning them into one creepy organism and sustaining the twisted Astartes:


On a related note, let me also share a small anecdote: I’ve also recently finished an Imperial Fists commander on bike, intended as a small present for Augustus b’Raass, and for entirely subconscious reasons, the Nurgle biker Lord ultimately became something resembling a dark reflection of the loyalist model:

Anyway, back to the model at hand: With most of the heavy lifting out of the way, I was free to keep detailing and tweaking the model. This meant lots of detail work on the bike (both to create rust holes and to add some Nurglite touches).

One thing I realised fairly early was that having to paint this guy as one solid piece would be a nightmare, so I used a trick that already served me so well on one of my Angron conversions and put a piece of tinfoil between the upper and lower body before I started sculpting. Which has resulted in both parts fitting together perfectly, while also remaining separate, so I’ll be able to take him apart as needed for painting:


This also made it far easier to add details and tweaks to the bike. So here’s a better look at it, pipes tubes and icky trophies included:



This step also involved some additional sculpting on the driver, including filling gaps and adding more disgusting details, such as semi-fleshy cables running around and into his torso (visible as darker green parts in the following picture):


And, like I said, it will be really easy to disassemble the model for painting:


The last thing I did, once again thanks to some very cool suggestions over at The Bolter & Chainsword, was to add a small passenger to the back of the bike:


The Nurgling from the Noxious Blightbringer’s backpack has found a new home with the “Blightrider” (hur hur) — and the little guy is obviously having the time of his life 😉

Anyway, here’s the finished conversion, ready for painting:




The deadline for completing the model is September 1st, so expect to see some paint on him fairly soon. That being said, I am still trying to come up with some cool ideas for a suitably impressive base (and, in fact, for a cool basing scheme for all of my new Nurgle models), so if you have any ideas, I would love to hear them!

On a related note, BubblesMcBub’s contribution to the challenge will be a pretty cool Iron Warriors Lord on a lizard, which you can (and should) check out here.

 

Anyway, as you can see, I am basically having a blast with the Grandfather’s followers right now 😉
Would love to hear your feddback! And, as always, thanks for looking and stay tuned for more!

Kings of the arena

Posted in 40k, Chaos, Conversions, WIP, World Eaters with tags , , , , , , , , , , , , on April 5, 2013 by krautscientist

All the orky shenanigans notwithstanding, I do of course remain a devoted follower of both the blood god and the XIIth Astartes legion, and I have the conversions to prove it: Touching up my World Eaters bikes some time ago gave me the idea for an additional bike in the squad. Once again, I wanted to build a model channelling the legion’s gladiatorial traditions, serving not so much as a mobile weapons platform, but rather as a modernised version of one of the chariots you would expect to see in films about gladiators in ancient Rome.

I was pretty sure that the World Eaters would have found a way to adapt the regular Space Marine trike to their gladiatorial fighting style. So I mulled over the idea and talked to Biohazard, who, bless his heart, pointed me towards Big Jim’s fantastic Infernal Assault Bike conversion. That really got my creative juices flowing, so I got myself a trike and some bitz from my bitzbox and got to work. And here’s the result: The Veredus Pattern Assault Trike:

Veredus pattern attack trike WIP (3)
Veredus pattern attack trike WIP (4)
Veredus pattern attack trike WIP (5)
Quite an easy kitbash, really: The undercarriage came from the regular trike, although I had to use a plate from an Ork kit to close the huge hole that was created by leaving off the seated marine. A huge shield from the WFB Minotaurs was added to serve as front armour. Apart from that, I only used a couple of additional spikes and a horned skull (once again from the Minotaur kit) to make the whole vehicle look more chaotic.

Veredus pattern attack trike WIP (7)
Getting the two World Eaters assembled and posed took a little more doing: The driver was simple enough, but the gladiator standing in the sidecar was a little more complicated, since I wanted him to be gripping the front of the sidecar for support, while brandishing a chain weapon in his other hand.

I used an unarmoured arm from the WFB Chaos Marauders and combined it with the hand from a CSM biker to achieve the pose I wanted. I also gave the model a bare head from the Grey Knights kit to make it look even more like a World Eater — those cables make for really convincing Butcher’s Nails!

Veredus pattern attack trike WIP (8)

Getting the model into the right position without having it awkwardly bump into the rider was probably the most difficult part. Seeing how little room there actually was, I decided to use a Dark Vengeance Chosen backpack since it’s a little less bulky than the regular CSM backpacks.

Veredus pattern attack trike WIP (4)
The rider is a fairly straightforward build, with just an arm wielding a wicked looking axe added for some extra brutality (the arm came from the Skullcrusher kit). However, after having obsessed over the choice of head for quite some time, I went for something a little more unconventional, sawing through one of the old, early 90s plastic berzerkers Biohazard sent me. That was quite an intense bit of surgery, but I managed to keep the head perfectly intact — I really love the facemask on that helmet!

Veredus pattern attack trike WIP (6)
And with that, my attack trike was finished. I may attach an additional bit here and there, but the overall build is as complete as it is ever going to be. As for gameplay uses, I may just use this trike as a regular bike or – when I am feeling adventurous – as a counts as Chaos Lord riding a juggernaut 😉

Anway, I think the model is a really nice fit for both the World Eaters’ gladiatorial traditions and my own army’s background as a hunting party.

As always, thanks for looking and stay tuned for more!

Veredus pattern attack trike WIP (1)